Last active 1740678332

surya-dmesg Raw
1[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51df805e]
2[ 0.000000] Linux version 6.13.4-sm7150 (pmos@build) (aarch64-alpine-linux-musl-gcc (Alpine 14.2.0) 14.2.0, GNU ld (GNU Binutils) 2.42) #1-postmarketos-qcom-sm7150 SMP PREEMPT Sun Feb 23 07:56:21 UTC
3[ 0.000000] KASLR enabled
4[ 0.000000] random: crng init done
5[ 0.000000] Machine model: Xiaomi POCO X3 NFC (Huaxing)
6[ 0.000000] earlycon: qcom_geni0 at MMIO 0x0000000000a88000 (options '115200n8')
7[ 0.000000] printk: legacy bootconsole [qcom_geni0] enabled
8[ 0.000000] efi: UEFI not found.
9[ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
10[ 0.000000] OF: reserved mem: 0x0000000085700000..0x0000000085cfffff (6144 KiB) nomap non-reusable hypervisor@85700000
11[ 0.000000] OF: reserved mem: 0x0000000085d00000..0x0000000085efffff (2048 KiB) nomap non-reusable xbl@85d00000
12[ 0.000000] OF: reserved mem: 0x0000000085f00000..0x0000000085f1ffff (128 KiB) nomap non-reusable aop@85f00000
13[ 0.000000] OF: reserved mem: 0x0000000085f20000..0x0000000085f3ffff (128 KiB) nomap non-reusable aop-cmd-db@85f20000
14[ 0.000000] OF: reserved mem: 0x0000000085fff000..0x0000000085ffffff (4 KiB) nomap non-reusable sec-apps@85fff000
15[ 0.000000] OF: reserved mem: 0x0000000086000000..0x00000000861fffff (2048 KiB) nomap non-reusable smem@86000000
16[ 0.000000] OF: reserved mem: 0x0000000086200000..0x0000000088efffff (46080 KiB) nomap non-reusable trust-zone@86200000
17[ 0.000000] OF: reserved mem: 0x000000008ab00000..0x000000008affffff (5120 KiB) nomap non-reusable camera@8ab00000
18[ 0.000000] OF: reserved mem: 0x000000008b000000..0x00000000933fffff (135168 KiB) nomap non-reusable mpss@8b000000
19[ 0.000000] OF: reserved mem: 0x0000000093400000..0x00000000938fffff (5120 KiB) nomap non-reusable venus@93400000
20[ 0.000000] OF: reserved mem: 0x0000000093900000..0x00000000956fffff (30720 KiB) nomap non-reusable cdsp@93900000
21[ 0.000000] OF: reserved mem: 0x0000000095700000..0x00000000974fffff (30720 KiB) nomap non-reusable adsp@95700000
22[ 0.000000] OF: reserved mem: 0x0000000097500000..0x000000009767ffff (1536 KiB) nomap non-reusable wlan-msa@97500000
23[ 0.000000] OF: reserved mem: 0x0000000097680000..0x00000000976fffff (512 KiB) nomap non-reusable npu@97680000
24[ 0.000000] OF: reserved mem: 0x0000000097700000..0x000000009770ffff (64 KiB) nomap non-reusable ipa-fw@97700000
25[ 0.000000] OF: reserved mem: 0x0000000097710000..0x0000000097714fff (20 KiB) nomap non-reusable ipa-gsi@97710000
26[ 0.000000] OF: reserved mem: 0x0000000097715000..0x0000000097716fff (8 KiB) nomap non-reusable gpu@97715000
27[ 0.000000] OF: reserved mem: 0x000000009e400000..0x000000009f7fffff (20480 KiB) nomap non-reusable qseecom@9e400000
28[ 0.000000] OF: reserved mem: 0x000000009f800000..0x00000000a15fffff (30720 KiB) nomap non-reusable sec-cdsp@9f800000
29[ 0.000000] OF: reserved mem: 0x000000009d700000..0x000000009d7fffff (1024 KiB) nomap non-reusable dfps-data@9e300000
30[ 0.000000] OF: reserved mem: 0x000000009c000000..0x000000009d6fffff (23552 KiB) nomap non-reusable splash_region@9c000000
31[ 0.000000] OF: reserved mem: 0x000000009d800000..0x000000009dbfffff (4096 KiB) map non-reusable ramoops@9d800000
32[ 0.000000] OF: reserved mem: 0x00000000fde01000..0x00000000fe000fff (2048 KiB) nomap non-reusable rmtfs@fde01000
33[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000001fcbfffff]
34[ 0.000000] NODE_DATA(0) allocated [mem 0x1fc01f580-0x1fc0222ff]
35[ 0.000000] Zone ranges:
36[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
37[ 0.000000] DMA32 empty
38[ 0.000000] Normal [mem 0x0000000100000000-0x00000001fcbfffff]
39[ 0.000000] Movable zone start for each node
40[ 0.000000] Early memory node ranges
41[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000856fffff]
42[ 0.000000] node 0: [mem 0x0000000085700000-0x0000000085f3ffff]
43[ 0.000000] node 0: [mem 0x0000000085f40000-0x0000000085ffefff]
44[ 0.000000] node 0: [mem 0x0000000085fff000-0x0000000088efffff]
45[ 0.000000] node 0: [mem 0x0000000088f00000-0x000000008aafffff]
46[ 0.000000] node 0: [mem 0x000000008ab00000-0x0000000097716fff]
47[ 0.000000] node 0: [mem 0x0000000097717000-0x000000009bffffff]
48[ 0.000000] node 0: [mem 0x000000009c000000-0x000000009d7fffff]
49[ 0.000000] node 0: [mem 0x000000009d800000-0x000000009e3fffff]
50[ 0.000000] node 0: [mem 0x000000009e400000-0x00000000a15fffff]
51[ 0.000000] node 0: [mem 0x00000000a1600000-0x00000000fde00fff]
52[ 0.000000] node 0: [mem 0x00000000fde01000-0x00000000fe000fff]
53[ 0.000000] node 0: [mem 0x00000000fe001000-0x00000001fcbfffff]
54[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000001fcbfffff]
55[ 0.000000] On node 0, zone Normal: 13312 pages in unavailable ranges
56[ 0.000000] cma: Reserved 32 MiB at 0x00000000fbe00000 on node -1
57[ 0.000000] psci: probing for conduit method from DT.
58[ 0.000000] psci: PSCIv1.1 detected in firmware.
59[ 0.000000] psci: Using standard PSCI v0.2 function IDs
60[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
61[ 0.000000] psci: SMC Calling Convention v1.1
62[ 0.000000] psci: OSI mode supported.
63[ 0.000000] psci: [Firmware Bug]: failed to set PC mode: -3
64[ 0.000000] percpu: Embedded 32 pages/cpu s91608 r8192 d31272 u131072
65[ 0.000000] pcpu-alloc: s91608 r8192 d31272 u131072 alloc=32*4096
66[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
67[ 0.000000] Detected VIPT I-cache on CPU0
68[ 0.000000] CPU features: detected: GIC system register CPU interface
69[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
70[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
71[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
72[ 0.000000] alternatives: applying boot alternatives
73[ 0.000000] Kernel command line: earlycon console=ttyMSM0,115200 quiet loglevel=2 pmos_boot_uuid=01e23765-c941-4602-b872-eb21323f8002 pmos_root_uuid=f770b9eb-ecd6-42ae-8d07-5ea86bf585a9 pmos_rootfsopts=defaults androidboot.verifiedbootstate=orange androidboot.keymaster=1 androidboot.vbmeta.device=PARTUUID=9371d6dd-d24a-e621-5cf9-ee183a0c1b22 androidboot.vbmeta.avb_version=1.0 androidboot.vbmeta.device_state=unlocked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=6336 androidboot.vbmeta.digest=c3286e559446580efa4129125ff4f59320e8d79f8cbe1105a895ccf28df46889 androidboot.vbmeta.invalidate_on_error=yes androidboot.veritymode=enforcing androidboot.bootdevice=1d84000.ufshc androidboot.fstab_suffix=default androidboot.boot_devices=soc/1d84000.ufshc androidboot.serialno= androidboot.product.hardware.sku=surya androidboot.cpuid=0x70c5ee16 androidboot.multisim_config=dsds androidboot.dp=0x0 androidboot.baseband=msm msm_drm.dsi_display0=dsi_nt36672c_huaxing_fhd_video_display: androidboot.fpsensor=gdx android
74[ 0.000000] Unknown kernel command line parameters "pmos_boot_uuid=01e23765-c941-4602-b872-eb21323f8002 pmos_root_uuid=f770b9eb-ecd6-42ae-8d07-5ea86bf585a9 pmos_rootfsopts=defaults", will be passed to user space.
75[ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
76[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
77[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
78[ 0.000000] Fallback order for Node 0: 0
79[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1559552
80[ 0.000000] Policy zone: Normal
81[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
82[ 0.000000] software IO TLB: area num 8.
83[ 0.000000] software IO TLB: mapped [mem 0x00000000f7e00000-0x00000000fbe00000] (64MB)
84[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
85[ 0.000000] ftrace: allocating 61476 entries in 241 pages
86[ 0.000000] ftrace: allocated 241 pages with 5 groups
87[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
88[ 0.000000] rcu: RCU event tracing is enabled.
89[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
90[ 0.000000] Trampoline variant of Tasks RCU enabled.
91[ 0.000000] Rude variant of Tasks RCU enabled.
92[ 0.000000] Tracing variant of Tasks RCU enabled.
93[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
94[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
95[ 0.000000] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
96[ 0.000000] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
97[ 0.000000] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
98[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
99[ 0.000000] GICv3: 928 SPIs implemented
100[ 0.000000] GICv3: 0 Extended SPIs implemented
101[ 0.000000] Root IRQ handler: gic_handle_irq
102[ 0.000000] GICv3: GICv3 features: 16 PPIs
103[ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=1
104[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
105[ 0.000000] ITS: No ITS available, not enabling LPIs
106[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
107[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
108[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
109[ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
110[ 0.000233] Console: colour dummy device 80x25
111[ 0.000325] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=19200)
112[ 0.000337] pid_max: default: 32768 minimum: 301
113[ 0.000391] LSM: initializing lsm=capability
114[ 0.000506] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
115[ 0.000527] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
116[ 0.003073] rcu: Hierarchical SRCU implementation.
117[ 0.003080] rcu: Max phase no-delay instances is 400.
118[ 0.003246] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
119[ 0.004873] EFI services will not be available.
120[ 0.006088] smp: Bringing up secondary CPUs ...
121[ 0.010025] Detected VIPT I-cache on CPU1
122[ 0.010105] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
123[ 0.010158] CPU1: Booted secondary processor 0x0000000100 [0x51df805e]
124[ 0.013961] Detected VIPT I-cache on CPU2
125[ 0.014024] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
126[ 0.014068] CPU2: Booted secondary processor 0x0000000200 [0x51df805e]
127[ 0.017996] Detected VIPT I-cache on CPU3
128[ 0.018056] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
129[ 0.018098] CPU3: Booted secondary processor 0x0000000300 [0x51df805e]
130[ 0.022183] Detected VIPT I-cache on CPU4
131[ 0.022239] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
132[ 0.022277] CPU4: Booted secondary processor 0x0000000400 [0x51df805e]
133[ 0.026307] Detected VIPT I-cache on CPU5
134[ 0.026365] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
135[ 0.026403] CPU5: Booted secondary processor 0x0000000500 [0x51df805e]
136[ 0.032089] CPU features: detected: Spectre-v2
137[ 0.032140] CPU features: detected: ARM erratum 1418040
138[ 0.032161] Detected PIPT I-cache on CPU6
139[ 0.032297] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
140[ 0.032329] arch_timer: Enabling local workaround for ARM erratum 1418040
141[ 0.032370] CPU6: Booted secondary processor 0x0000000600 [0x51df804e]
142[ 0.036073] Detected PIPT I-cache on CPU7
143[ 0.036237] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
144[ 0.036270] arch_timer: Enabling local workaround for ARM erratum 1418040
145[ 0.036314] CPU7: Booted secondary processor 0x0000000700 [0x51df804e]
146[ 0.036555] smp: Brought up 1 node, 8 CPUs
147[ 0.036578] SMP: Total of 8 processors activated.
148[ 0.036582] CPU: All CPU(s) started at EL1
149[ 0.036587] CPU features: detected: 32-bit EL0 Support
150[ 0.036592] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
151[ 0.036597] CPU features: detected: Common not Private translations
152[ 0.036601] CPU features: detected: CRC32 instructions
153[ 0.036610] CPU features: detected: RCpc load-acquire (LDAPR)
154[ 0.036615] CPU features: detected: LSE atomic instructions
155[ 0.036619] CPU features: detected: Privileged Access Never
156[ 0.036622] CPU features: detected: RAS Extension Support
157[ 0.036721] alternatives: applying system-wide alternatives
158[ 0.040229] CPU features: detected: Hardware dirty bit management on CPU6-7
159[ 0.040667] Memory: 5609504K/6238208K available (20224K kernel code, 3338K rwdata, 7672K rodata, 7488K init, 667K bss, 586008K reserved, 32768K cma-reserved)
160[ 0.042420] devtmpfs: initialized
161[ 0.055564] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
162[ 0.055584] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
163[ 0.056275] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
164[ 0.056283] 0 pages in range for non-PLT usage
165[ 0.056287] 514384 pages in range for PLT usage
166[ 0.056462] pinctrl core: initialized pinctrl subsystem
167[ 0.056892] DMI not present or invalid.
168[ 0.059235] NET: Registered PF_NETLINK/PF_ROUTE protocol family
169[ 0.060186] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
170[ 0.060403] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
171[ 0.060645] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
172[ 0.060687] audit: initializing netlink subsys (disabled)
173[ 0.060827] audit: type=2000 audit(0.057:1): state=initialized audit_enabled=0 res=1
174[ 0.061162] thermal_sys: Registered thermal governor 'step_wise'
175[ 0.061169] thermal_sys: Registered thermal governor 'power_allocator'
176[ 0.061236] cpuidle: using governor menu
177[ 0.061316] NET: Registered PF_QIPCRTR protocol family
178[ 0.061622] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
179[ 0.061811] ASID allocator initialised with 32768 entries
180[ 0.062003] Serial: AMBA PL011 UART driver
181[ 0.062867] pstore: Using crash dump compression: deflate
182[ 0.062878] printk: legacy console [ramoops-1] enabled
183[ 0.063190] pstore: Registered ramoops as persistent store backend
184[ 0.063196] ramoops: using 0x400000@0x9d800000, ecc: 0
185[ 0.065069] CPUidle PSCI: Initialized CPU PM domain topology using OSI mode
186[ 0.074083] /soc@0/ufshc@1d84000: Fixed dependency cycle(s) with /soc@0/phy@1d87000
187[ 0.074127] /soc@0/phy@1d87000: Fixed dependency cycle(s) with /soc@0/ufshc@1d84000
188[ 0.074364] /soc@0/usb@a6f8800/usb@a600000: Fixed dependency cycle(s) with /soc@0/spmi@c440000/pmic@0/typec@1500/connector
189[ 0.074504] /soc@0/display-subsystem@ae00000/display-controller@ae01000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
190[ 0.074559] /soc@0/display-subsystem@ae00000/dsi@ae94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0
191[ 0.074598] /soc@0/display-subsystem@ae00000/dsi@ae94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/display-controller@ae01000
192[ 0.074702] /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
193[ 0.074740] /soc@0/display-subsystem@ae00000/phy@ae94400: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000
194[ 0.074760] /soc@0/clock-controller@af00000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/phy@ae94400
195[ 0.074806] /soc@0/spmi@c440000/pmic@0/typec@1500/connector: Fixed dependency cycle(s) with /soc@0/usb@a6f8800/usb@a600000
196[ 0.074872] /soc@0/interrupt-controller@17a00000: Fixed dependency cycle(s) with /soc@0/interrupt-controller@17a00000
197[ 0.077436] /soc@0/ufshc@1d84000: Fixed dependency cycle(s) with /soc@0/phy@1d87000
198[ 0.077747] /soc@0/ufshc@1d84000: Fixed dependency cycle(s) with /soc@0/phy@1d87000
199[ 0.077804] /soc@0/phy@1d87000: Fixed dependency cycle(s) with /soc@0/ufshc@1d84000
200[ 0.083077] /soc@0/usb@a6f8800/usb@a600000: Fixed dependency cycle(s) with /soc@0/spmi@c440000/pmic@0/typec@1500/connector
201[ 0.085238] /soc@0/display-subsystem@ae00000: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000
202[ 0.085404] /soc@0/display-subsystem@ae00000/display-controller@ae01000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
203[ 0.085556] /soc@0/display-subsystem@ae00000/dsi@ae94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0
204[ 0.085657] /soc@0/display-subsystem@ae00000/dsi@ae94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/display-controller@ae01000
205[ 0.085933] /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
206[ 0.086009] /soc@0/display-subsystem@ae00000/phy@ae94400: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000
207[ 0.086234] /soc@0/display-subsystem@ae00000/phy@ae94400: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000
208[ 0.086383] /soc@0/display-subsystem@ae00000: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000
209[ 0.086422] /soc@0/clock-controller@af00000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/phy@ae94400
210[ 0.088149] /soc@0/spmi@c440000/pmic@0/typec@1500/connector: Fixed dependency cycle(s) with /soc@0/usb@a6f8800/usb@a600000
211[ 0.098349] /soc@0/rsc@18200000/regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps5
212[ 0.098400] /soc@0/rsc@18200000/regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps4
213[ 0.098636] /soc@0/rsc@18200000/regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-1/bob
214[ 0.098729] /soc@0/rsc@18200000/regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-1/smps8
215[ 0.103818] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
216[ 0.103839] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
217[ 0.103854] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
218[ 0.103864] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
219[ 0.103876] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
220[ 0.103885] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
221[ 0.103896] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
222[ 0.103904] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
223[ 0.122739] raid6: neonx8 gen() 1582 MB/s
224[ 0.139802] raid6: neonx4 gen() 1586 MB/s
225[ 0.156881] raid6: neonx2 gen() 1333 MB/s
226[ 0.173937] raid6: neonx1 gen() 1053 MB/s
227[ 0.190988] raid6: int64x8 gen() 695 MB/s
228[ 0.208067] raid6: int64x4 gen() 738 MB/s
229[ 0.225130] raid6: int64x2 gen() 615 MB/s
230[ 0.242180] raid6: int64x1 gen() 509 MB/s
231[ 0.242189] raid6: using algorithm neonx4 gen() 1586 MB/s
232[ 0.259222] raid6: .... xor() 1245 MB/s, rmw enabled
233[ 0.259232] raid6: using neon recovery algorithm
234[ 0.264263] iommu: Default domain type: Translated
235[ 0.264280] iommu: DMA domain TLB invalidation policy: strict mode
236[ 0.265866] SCSI subsystem initialized
237[ 0.266089] usbcore: registered new interface driver usbfs
238[ 0.266130] usbcore: registered new interface driver hub
239[ 0.266174] usbcore: registered new device driver usb
240[ 0.266366] pps_core: LinuxPPS API ver. 1 registered
241[ 0.266376] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
242[ 0.266396] PTP clock support registered
243[ 0.266450] EDAC MC: Ver: 3.0.0
244[ 0.266806] scmi_core: SCMI protocol bus registered
245[ 0.267790] Advanced Linux Sound Architecture Driver Initialized.
246[ 0.269079] vgaarb: loaded
247[ 0.269707] clocksource: Switched to clocksource arch_sys_counter
248[ 0.270181] VFS: Disk quotas dquot_6.6.0
249[ 0.270218] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
250[ 0.278948] NET: Registered PF_INET protocol family
251[ 0.279305] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
252[ 0.291587] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
253[ 0.291743] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
254[ 0.291768] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
255[ 0.292346] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
256[ 0.293531] TCP: Hash tables configured (established 65536 bind 65536)
257[ 0.293650] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
258[ 0.293881] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)
259[ 0.294212] NET: Registered PF_UNIX/PF_LOCAL protocol family
260[ 0.294665] RPC: Registered named UNIX socket transport module.
261[ 0.294679] RPC: Registered udp transport module.
262[ 0.294687] RPC: Registered tcp transport module.
263[ 0.294719] RPC: Registered tcp-with-tls transport module.
264[ 0.294726] RPC: Registered tcp NFSv4.1 backchannel transport module.
265[ 0.296110] PCI: CLS 0 bytes, default 64
266[ 0.296298] Trying to unpack rootfs image as initramfs...
267[ 0.302347] Initialise system trusted keyrings
268[ 0.302537] workingset: timestamp_bits=42 max_order=21 bucket_order=0
269[ 0.302982] squashfs: version 4.0 (2009/01/31) Phillip Lougher
270[ 0.303289] NFS: Registering the id_resolver key type
271[ 0.303318] Key type id_resolver registered
272[ 0.303328] Key type id_legacy registered
273[ 0.303353] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
274[ 0.303373] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
275[ 0.304319] Key type cifs.idmap registered
276[ 0.390450] NET: Registered PF_ALG protocol family
277[ 0.390473] xor: measuring software checksum speed
278[ 0.392024] 8regs : 2126 MB/sec
279[ 0.393566] 32regs : 2148 MB/sec
280[ 0.394575] arm64_neon : 3284 MB/sec
281[ 0.394584] xor: using function: arm64_neon (3284 MB/sec)
282[ 0.394598] async_tx: api initialized (async)
283[ 0.394607] Key type asymmetric registered
284[ 0.394615] Asymmetric key parser 'x509' registered
285[ 0.394628] Asymmetric key parser 'pkcs8' registered
286[ 0.394724] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
287[ 0.394907] io scheduler mq-deadline registered
288[ 0.394924] io scheduler kyber registered
289[ 0.394967] io scheduler bfq registered
290[ 0.400322] ledtrig-cpu: registered to indicate activity on CPUs
291[ 0.401342] simple-framebuffer 9c000000.framebuffer: framebuffer at 0x9c000000, 0x9e3400 bytes
292[ 0.401353] simple-framebuffer 9c000000.framebuffer: format=a8r8g8b8, mode=1080x2400x32, linelength=4320
293[ 0.401732] Console: switching to colour frame buffer device 135x150
294[ 0.409271] simple-framebuffer 9c000000.framebuffer: fb0: simplefb registered!
295[ 0.418323] smps1: Setting 1000000-1200000uV
296[ 0.418710] smps8: Setting 1120000-1408000uV
297[ 0.418896] ldo1: Setting 1616000-1984000uV
298[ 0.419142] ldo2: Setting 1200000-1352000uV
299[ 0.419389] ldo3: Setting 1144000-1256000uV
300[ 0.419587] ldo4: Setting 1648000-2950000uV
301[ 0.419799] ldo5: Setting 1648000-2950000uV
302[ 0.420002] ldo6: Setting 1648000-3100000uV
303[ 0.420183] ldo7: Setting 3000000-3312000uV
304[ 0.420379] ldo8: Setting 1800000-1900000uV
305[ 0.420628] ldo9: Setting 2950000-3100000uV
306[ 0.420831] ldo10: Setting 3200000-3312000uV
307[ 0.420867] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
308[ 0.421031] ldo11: Setting 2950000-3400000uV
309[ 0.421231] bob: Setting 3296000-3960000uV
310[ 0.423212] msm_serial: driver initialized
311[ 0.436090] brd: module loaded
312[ 0.440387] loop: module loaded
313[ 0.441355] spmi_pmic_arb c440000.spmi: PMIC arbiter version v5 (0x50000000)
314[ 0.443812] /soc@0/spmi@c440000/pmic@0/typec@1500/connector: Fixed dependency cycle(s) with /soc@0/usb@a6f8800/usb@a600000
315[ 0.451814] tun: Universal TUN/TAP device driver, 1.6
316[ 0.452066] thunder_xcv, ver 1.0
317[ 0.452092] thunder_bgx, ver 1.0
318[ 0.452112] nicpf, ver 1.0
319[ 0.452134] e1000: Intel(R) PRO/1000 Network Driver
320[ 0.452139] e1000: Copyright (c) 1999-2006 Intel Corporation.
321[ 0.452162] e1000e: Intel(R) PRO/1000 Network Driver
322[ 0.452167] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
323[ 0.452282] sky2: driver version 1.30
324[ 0.452615] VFIO - User Level meta-driver version: 0.3
325[ 0.453495] usbcore: registered new interface driver usb-storage
326[ 0.454371] i2c_dev: i2c /dev entries driver
327[ 0.455735] input: pm8941_pwrkey as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@800/c440000.spmi:pmic@0:pon@800:pwrkey/input/input0
328[ 0.456681] input: pm8941_resin as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@800/c440000.spmi:pmic@0:pon@800:resin/input/input1
329[ 0.465754] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
330[ 0.467953] sdhci: Secure Digital Host Controller Interface driver
331[ 0.467965] sdhci: Copyright(c) Pierre Ossman
332[ 0.467988] Synopsys Designware Multimedia Card Interface Driver
333[ 0.468099] sdhci-pltfm: SDHCI platform and OF driver helper
334[ 0.469162] hid: raw HID events driver (C) Jiri Kosina
335[ 0.471840] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 (0,8000003f) counters available
336[ 0.472645] hw perfevents: enabled with armv8_cortex_a78 PMU driver, 7 (0,8000003f) counters available
337[ 0.475634] NET: Registered PF_PACKET protocol family
338[ 0.475718] Key type dns_resolver registered
339[ 0.483526] registered taskstats version 1
340[ 0.483725] Loading compiled-in X.509 certificates
341[ 0.490473] Demotion targets for Node 0: null
342[ 0.490562] Key type .fscrypt registered
343[ 0.490568] Key type fscrypt-provisioning registered
344[ 0.491783] Btrfs loaded, zoned=no, fsverity=no
345[ 0.518465] cpu cpu0: EM: OPP:576000 is inefficient
346[ 0.518681] cpu cpu0: EM: created perf domain
347[ 0.518701] energy_model: Accessing cpu6 policy failed
348[ 0.525800] cpu cpu6: EM: OPP:300000 is inefficient
349[ 0.526064] cpu cpu6: EM: created perf domain
350[ 0.526072] energy_model: updating cpu0 cpu_cap=382 old capacity=488
351[ 0.526081] cpu cpu0: EM: OPP:576000 is inefficient
352[ 0.526086] cpu cpu0: EM: OPP:300000 is inefficient
353[ 0.532492] qcom_scm: convention: smc arm 64
354[ 0.532730] qcom_scm firmware:scm: SHM Bridge not supported
355[ 0.532795] qcom_scm firmware:scm: qseecom: found qseecom with version 0x1400000
356[ 0.532806] qcom_scm firmware:scm: qseecom: untested machine, skipping
357[ 0.538195] qcom-ice 1d90000.crypto: Found QC Inline Crypto Engine (ICE) v3.1.75
358[ 0.538990] smps4: Setting 824000-1120000uV
359[ 0.539277] smps5: Setting 1744000-2040000uV
360[ 0.539427] ldo1: Setting 1096000-1304000uV
361[ 0.539472] arm-smmu 5040000.iommu: probing hardware configuration...
362[ 0.539480] arm-smmu 5040000.iommu: SMMUv2 with:
363[ 0.539503] arm-smmu 5040000.iommu: stage 1 translation
364[ 0.539508] arm-smmu 5040000.iommu: address translation ops
365[ 0.539512] arm-smmu 5040000.iommu: non-coherent table walk
366[ 0.539517] arm-smmu 5040000.iommu: (IDR0.CTTW overridden by FW configuration)
367[ 0.539522] arm-smmu 5040000.iommu: stream matching with 5 register groups
368[ 0.539541] arm-smmu 5040000.iommu: 5 context banks (0 stage-2 only)
369[ 0.539559] arm-smmu 5040000.iommu: Supported page sizes: 0x61311000
370[ 0.539564] arm-smmu 5040000.iommu: Stage-1: 48-bit VA -> 36-bit IPA
371[ 0.539778] arm-smmu 5040000.iommu: preserved 0 boot mappings
372[ 0.539971] ldo2: Setting 944000-1056000uV
373[ 0.540394] ldo3: Setting 968000-1064000uV
374[ 0.540874] ldo4: Setting 824000-920000uV
375[ 0.541226] ldo5: Setting 2600000-2800000uV
376[ 0.541564] ldo6: Setting 1096000-1304000uV
377[ 0.541897] ldo9: Setting 624000-760000uV
378[ 0.542333] ldo10: Setting 1720000-1832000uV
379[ 0.542672] ldo11: Setting 1696000-1984000uV
380[ 0.542961] ldo12: Setting 1696000-1952000uV
381[ 0.543359] ldo13: Setting 1696000-1904000uV
382[ 0.543368] arm-smmu 15000000.iommu: probing hardware configuration...
383[ 0.543377] arm-smmu 15000000.iommu: SMMUv2 with:
384[ 0.543394] arm-smmu 15000000.iommu: stage 1 translation
385[ 0.543399] arm-smmu 15000000.iommu: coherent table walk
386[ 0.543405] arm-smmu 15000000.iommu: stream matching with 79 register groups
387[ 0.543430] arm-smmu 15000000.iommu: 61 context banks (0 stage-2 only)
388[ 0.543622] ldo14: Setting 1720000-1856000uV
389[ 0.543782] arm-smmu 15000000.iommu: Supported page sizes: 0x61311000
390[ 0.543788] arm-smmu 15000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
391[ 0.543884] ldo15: Setting 1696000-1904000uV
392[ 0.543967] arm-smmu 15000000.iommu: preserved 0 boot mappings
393[ 0.544153] ldo16: Setting 1800000-1800000uV
394[ 0.544425] ldo17: Setting 3000000-3232000uV
395[ 0.544704] ldo18: Setting 1696000-1904000uV
396[ 0.544984] ldo19: Setting 2944000-3304000uV
397[ 0.546498] msm-mdss ae00000.display-subsystem: Adding to iommu group 0
398[ 0.547034] /soc@0/display-subsystem@ae00000/display-controller@ae01000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
399[ 0.548125] /soc@0/display-subsystem@ae00000/display-controller@ae01000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
400[ 0.548211] /soc@0/display-subsystem@ae00000/dsi@ae94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0
401[ 0.548266] /soc@0/display-subsystem@ae00000/dsi@ae94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/display-controller@ae01000
402[ 0.548555] /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
403[ 0.555870] /soc@0/spmi@c440000/pmic@0/typec@1500/connector: Fixed dependency cycle(s) with /soc@0/usb@a6f8800/usb@a600000
404[ 0.555986] /soc@0/usb@a6f8800/usb@a600000: Fixed dependency cycle(s) with /soc@0/spmi@c440000/pmic@0/typec@1500/connector
405[ 0.565960] ufshcd-qcom 1d84000.ufshc: Adding to iommu group 1
406[ 0.566278] sdhci_msm 8804000.mmc: Adding to iommu group 2
407[ 0.566824] sdhci_msm 8804000.mmc: Got CD GPIO
408[ 0.567180] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
409[ 0.567237] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
410[ 0.574091] Freeing initrd memory: 8696K
411[ 0.594537] gpi 800000.dma-controller: Adding to iommu group 3
412[ 0.595593] gpi a00000.dma-controller: Adding to iommu group 4
413[ 0.598032] qcom-qusb2-phy 88e2000.phy: Registered Qcom-QUSB2 phy
414[ 0.598489] geni_se_qup 8c0000.geniqup: Adding to iommu group 5
415[ 0.607358] 88c000.serial: ttyHS0 at MMIO 0x88c000 (irq = 154, base_baud = 0) is a MSM
416[ 0.607584] mmc2: SDHCI controller on 8804000.mmc [8804000.mmc] using ADMA 64-bit
417[ 0.607788] serial serial0: tty port ttyHS0 registered
418[ 0.608920] geni_se_qup ac0000.geniqup: Adding to iommu group 6
419[ 0.610792] a88000.serial: ttyMSM0 at MMIO 0xa88000 (irq = 157, base_baud = 0) is a MSM
420[ 0.611126] printk: legacy console [ttyMSM0] enabled
421[ 0.611136] printk: legacy bootconsole [qcom_geni0] disabled
422[ 0.616286] adreno 5000000.gpu: Adding to iommu group 7
423[ 0.619400] msm_dsi ae94000.dsi: supply refgen not found, using dummy regulator
424[ 0.619845] /soc@0/display-subsystem@ae00000/dsi@ae94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0
425[ 0.620009] /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
426[ 0.620640] dwc3 a600000.usb: Adding to iommu group 8
427[ 0.635753] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
428[ 0.635779] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
429[ 0.683892] scsi host0: ufshcd
430[ 0.685408] scsi 0:0:0:49488: Well-known LUN SAMSUNG KM2V8001CM-B707 1500 PQ: 0 ANSI: 6
431[ 0.687298] input: gpio-keys as /devices/platform/gpio-keys/input/input2
432[ 0.687723] cfg80211: Loading compiled-in X.509 certificates for regulatory database
433[ 0.690732] scsi 0:0:0:49476: Well-known LUN SAMSUNG KM2V8001CM-B707 1500 PQ: 0 ANSI: 6
434[ 0.693935] scsi 0:0:0:49456: Well-known LUN SAMSUNG KM2V8001CM-B707 1500 PQ: 0 ANSI: 6
435[ 0.696627] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
436[ 0.696920] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
437[ 0.696961] clk: Disabling unused clocks
438[ 0.698129] scsi 0:0:0:0: Direct-Access SAMSUNG KM2V8001CM-B707 1500 PQ: 0 ANSI: 6
439[ 0.698850] PM: genpd: Disabling unused power domains
440[ 0.698877] ALSA device list:
441[ 0.698880] No soundcards found.
442[ 0.701330] scsi 0:0:0:1: Direct-Access SAMSUNG KM2V8001CM-B707 1500 PQ: 0 ANSI: 6
443[ 0.703813] scsi 0:0:0:2: Direct-Access SAMSUNG KM2V8001CM-B707 1500 PQ: 0 ANSI: 6
444[ 0.705377] scsi 0:0:0:3: Direct-Access SAMSUNG KM2V8001CM-B707 1500 PQ: 0 ANSI: 6
445[ 0.708052] scsi 0:0:0:4: Direct-Access SAMSUNG KM2V8001CM-B707 1500 PQ: 0 ANSI: 6
446[ 0.710585] scsi 0:0:0:5: Direct-Access SAMSUNG KM2V8001CM-B707 1500 PQ: 0 ANSI: 6
447[ 0.713449] sd 0:0:0:0: [sda] 30119936 4096-byte logical blocks: (123 GB/115 GiB)
448[ 0.713662] sd 0:0:0:0: [sda] Write Protect is off
449[ 0.713670] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
450[ 0.713906] sd 0:0:0:1: [sdb] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
451[ 0.713970] sd 0:0:0:1: [sdb] Write Protect is off
452[ 0.713972] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
453[ 0.713974] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
454[ 0.714064] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
455[ 0.714107] sd 0:0:0:1: [sdb] Preferred minimum I/O size 524288 bytes
456[ 0.714110] sd 0:0:0:1: [sdb] Optimal transfer size 524288 bytes
457[ 0.714112] sd 0:0:0:0: [sda] Preferred minimum I/O size 524288 bytes
458[ 0.714127] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
459[ 0.714422] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
460[ 0.715025] sd 0:0:0:2: [sdc] Write Protect is off
461[ 0.715047] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
462[ 0.715333] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB)
463[ 0.715359] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.00 GiB)
464[ 0.715498] sd 0:0:0:4: [sde] Write Protect is off
465[ 0.715507] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
466[ 0.715601] sd 0:0:0:3: [sdd] Write Protect is off
467[ 0.715611] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
468[ 0.715644] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
469[ 0.715889] sd 0:0:0:2: [sdc] Preferred minimum I/O size 524288 bytes
470[ 0.715891] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
471[ 0.715900] sd 0:0:0:2: [sdc] Optimal transfer size 524288 bytes
472[ 0.715927] sd 0:0:0:5: [sdf] 32768 4096-byte logical blocks: (134 MB/128 MiB)
473[ 0.716297] sd 0:0:0:4: [sde] Preferred minimum I/O size 524288 bytes
474[ 0.716299] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
475[ 0.716310] sd 0:0:0:4: [sde] Optimal transfer size 524288 bytes
476[ 0.716328] sd 0:0:0:5: [sdf] Write Protect is off
477[ 0.716340] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
478[ 0.716393] sd 0:0:0:3: [sdd] Preferred minimum I/O size 524288 bytes
479[ 0.716403] sd 0:0:0:3: [sdd] Optimal transfer size 524288 bytes
480[ 0.716821] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
481[ 0.717147] sd 0:0:0:5: [sdf] Preferred minimum I/O size 524288 bytes
482[ 0.717158] sd 0:0:0:5: [sdf] Optimal transfer size 524288 bytes
483[ 0.731963] sdb: sdb1 sdb2
484[ 0.732453] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47
485[ 0.732489] sd 0:0:0:1: [sdb] Attached SCSI disk
486[ 0.732977] sdf: sdf1 sdf2 sdf3 sdf4 sdf5
487[ 0.734474] sd 0:0:0:5: [sdf] Attached SCSI disk
488[ 0.734872] sdc: sdc1 sdc2
489[ 0.734907] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16
490[ 0.734949] sdd: sdd1 sdd2 sdd3
491[ 0.735231] sd 0:0:0:2: [sdc] Attached SCSI disk
492[ 0.735327] sd 0:0:0:3: [sdd] Attached SCSI disk
493[ 0.740969] sd 0:0:0:0: [sda] Attached SCSI disk
494[ 0.742916] sd 0:0:0:4: [sde] Attached SCSI disk
495[ 0.748899] Freeing unused kernel memory: 7488K
496[ 0.749145] Run /init as init process
497[ 0.749155] with arguments:
498[ 0.749164] /init
499[ 0.749171] with environment:
500[ 0.749178] HOME=/
501[ 0.749184] TERM=linux
502[ 0.749191] pmos_boot_uuid=01e23765-c941-4602-b872-eb21323f8002
503[ 0.749199] pmos_root_uuid=f770b9eb-ecd6-42ae-8d07-5ea86bf585a9
504[ 0.749206] pmos_rootfsopts=defaults
505[ 0.791155] syslogd started: BusyBox v1.37.0
506[ 0.793601] [pmOS-rd]: ❬❬ PMOS STAGE 1 ❭❭
507[ 0.793639] [pmOS-rd]: initramfs version: 3.7.5-r0
508[ 0.793661] [pmOS-rd]: ❬❬ PMOS STAGE 2 ❭❭
509[ 0.815577] udevd[210]: starting eudev-3.2.14
510[ 0.958274] msm_dpu ae01000.display-controller: bound ae94000.dsi (ops dsi_ops)
511[ 0.959122] adreno 5000000.gpu: supply vdd not found, using dummy regulator
512[ 0.960140] adreno 5000000.gpu: supply vddcx not found, using dummy regulator
513[ 0.966336] platform 506a000.gmu: Adding to iommu group 9
514[ 0.968075] msm_dpu ae01000.display-controller: bound 5000000.gpu (ops a3xx_ops)
515[ 0.968898] Console: switching to colour dummy device 80x25
516[ 0.971059] [drm:dpu_kms_hw_init:1129] dpu hardware revision:0x50020000
517[ 0.972873] [drm] Initialized msm 1.12.0 for ae01000.display-controller on minor 0
518[ 0.973159] msm_dpu ae01000.display-controller: [drm:adreno_request_fw] loaded qcom/a630_sqe.fw from new location
519[ 0.973338] msm_dpu ae01000.display-controller: [drm:adreno_request_fw] loaded qcom/a630_gmu.bin from new location
520[ 0.977210] adreno 5000000.gpu: [drm:adreno_zap_shader_load] *ERROR* Unable to load qcom/sm7150/surya/a615_zap.mbn
521[ 0.977245] msm_dpu ae01000.display-controller: [drm:adreno_load_gpu] *ERROR* gpu hw init failed: -2
522[ 1.074107] [pmOS-rd]: Setup usb network
523[ 1.080607] [pmOS-rd]: Setting up USB gadget through configfs
524[ 1.091960] configfs-gadget.g1 gadget.0: HOST MAC 8e:11:a3:6a:88:e0
525[ 1.091976] configfs-gadget.g1 gadget.0: MAC b2:69:01:cf:d4:79
526[ 1.108119] [pmOS-rd]: Starting unudhcpd with server ip 172.16.42.1, client ip: 172.16.42.2
527[ 1.113088] [pmOS-rd]: Using interface usb0
528[ 1.113107] [pmOS-rd]: Starting the DHCP daemon
529[ 1.114997] [pmOS-rd]: Trying to start server with parameters: Server IP addr: 172.16.42.1:67, client IP addr: 172.16.42.2, interface: usb0
530[ 1.118974] [pmOS-rd]: Setting framebuffer mode to: U:1080x2400p-0
531[ 1.206177] Console: switching to colour frame buffer device 135x150
532[ 1.206212] fb0: Framebuffer is not in virtual address space.
533[ 1.218715] ------------[ cut here ]------------
534[ 1.218724] Unbalanced enable for IRQ 164
535[ 1.218743] WARNING: CPU: 1 PID: 96 at kernel/irq/manage.c:790 __enable_irq+0x54/0x90
536[ 1.218771] Modules linked in: qcom_wled panel_huaxing_nt36672c nt36xxx_spi_ts
537[ 1.218796] CPU: 1 UID: 0 PID: 96 Comm: kworker/1:1 Not tainted 6.13.4-sm7150 #1-postmarketos-qcom-sm7150
538[ 1.218809] Hardware name: Xiaomi POCO X3 NFC (Huaxing) (DT)
539[ 1.218817] Workqueue: events wled_ovp_work [qcom_wled]
540[ 1.218844] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
541[ 1.218857] pc : __enable_irq+0x54/0x90
542[ 1.218869] lr : __enable_irq+0x54/0x90
543[ 1.218881] sp : ffff800080cdbd50
544[ 1.218886] x29: ffff800080cdbd50 x28: 0000000000000000 x27: 0000000000000000
545[ 1.218904] x26: 0000000000000000 x25: 0000000000000000 x24: ffff4813c0124205
546[ 1.218921] x23: ffff4813c1286730 x22: ffff4814b5f34780 x21: ffff4813c0124200
547[ 1.218937] x20: 00000000000000a4 x19: ffff4813c1699a00 x18: ffffffffffffffff
548[ 1.218953] x17: ffff7f7fdefc4000 x16: ffffc894d537ffb8 x15: ffffc894d788b31c
549[ 1.218970] x14: 0000000000000000 x13: 3436312051524920 x12: 726f6620656c6261
550[ 1.218986] x11: ffffc894d75562a0 x10: 0000000000000217 x9 : ffffc894d537771c
551[ 1.219002] x8 : 0000000000017fe8 x7 : 00000000fffff000 x6 : ffffc894d75ae2a0
552[ 1.219018] x5 : 80000000fffff000 x4 : 0000000000000000 x3 : 00000000ffffffff
553[ 1.219034] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff4813c1d1e900
554[ 1.219050] Call trace:
555[ 1.219055] __enable_irq+0x54/0x90 (P)
556[ 1.219072] enable_irq+0x58/0xb8
557[ 1.219085] wled_ovp_work+0x1c/0x38 [qcom_wled]
558[ 1.219103] process_one_work+0x158/0x3c8
559[ 1.219120] worker_thread+0x2dc/0x400
560[ 1.219134] kthread+0x118/0x130
561[ 1.219147] ret_from_fork+0x10/0x20
562[ 1.219161] ---[ end trace 0000000000000000 ]---
563[ 1.237796] msm_dpu ae01000.display-controller: [drm] fb0: msmdrmfb frame buffer device
564[ 1.319236] [pmOS-rd]: Waiting for super partition /dev/sda15...
565[ 1.333242] nt36xxx-spi spi0.0: This is NVT touch IC, 36672, mapid 68
566[ 1.333458] input: Novatek NT36XXX Touchscreen as /devices/platform/soc@0/8c0000.geniqup/880000.spi/spi_master/spi0/spi0.0/input/input3
567[ 1.333886] nt36xxx-spi spi0.0: Novatek touchscreen initialized
568[ 1.420850] nt36xxx-spi spi0.0: This is NVT touch IC, 36672, mapid 68
569[ 1.588357] nt36xxx-spi spi0.0: Touch IC fw loaded ok
570[ 2.338520] [pmOS-rd]: Trying to mount subpartitions for 10 seconds...
571[ 3.539927] [pmOS-rd]: Mount subpartitions of /dev/disk/by-partlabel/userdata
572[ 6.860738] [pmOS-rd]: /dev/mapper/userdata2
573[ 7.931500] [pmOS-rd]: Not resizing root partition (/dev/mapper/userdata2): no free space left
574[ 7.951455] [pmOS-rd]: Auto-repair and check 'ext' filesystem (/dev/mapper/userdata2)
575[ 7.961099] [pmOS-rd]: pmOS_root: clean, 27372/6588864 files, 815013/27417054 blocks
576[ 8.088123] [pmOS-rd]: Resize 'ext4' root filesystem (/dev/mapper/userdata2)
577[ 8.093616] [pmOS-rd]: resize2fs 1.47.2 (1-Jan-2025)
578[ 8.096034] [pmOS-rd]: The filesystem is already 27417054 (4k) blocks long. Nothing to do!
579[ 8.104530] [pmOS-rd]: Mount root partition (/dev/mapper/userdata2) to /sysroot (read-write) with options defaults
580[ 8.136144] [pmOS-rd]: Detected ext4 filesystem
581[ 8.179414] EXT4-fs (dm-5): mounted filesystem f770b9eb-ecd6-42ae-8d07-5ea86bf585a9 r/w with ordered data mode. Quota mode: none.
582[ 8.197238] [pmOS-rd]: Switching root
583[ 8.314124] syslogd exiting
584[ 9.933215] udevd[1036]: starting eudev-3.2.14
585[ 10.018989] ath10k_snoc 18800000.wifi: Adding to iommu group 10
586[ 10.042919] remoteproc remoteproc0: adsp is available
587[ 10.080487] ipa 1e40000.ipa: Adding to iommu group 11
588[ 10.081368] remoteproc remoteproc1: modem is available
589[ 10.090969] ipa 1e40000.ipa: IPA driver initialized
590[ 10.133497] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6000: registered as rtc0
591[ 10.133533] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6000: setting system clock to 1974-07-01T18:43:49 UTC (141936229)
592[ 10.134819] ipa 1e40000.ipa: IPA driver setup completed successfully
593[ 10.149050] nfc: nfc_init: NFC Core ver 0.1
594[ 10.151520] NET: Registered PF_NFC protocol family
595[ 10.164947] remoteproc remoteproc0: powering up adsp
596[ 10.178294] Bluetooth: Core ver 2.22
597[ 10.178355] NET: Registered PF_BLUETOOTH protocol family
598[ 10.178357] Bluetooth: HCI device and connection manager initialized
599[ 10.178367] Bluetooth: HCI socket layer initialized
600[ 10.178372] Bluetooth: L2CAP socket layer initialized
601[ 10.178379] Bluetooth: SCO socket layer initialized
602[ 10.184229] remoteproc remoteproc0: Booting fw image qcom/sm7150/surya/adsp.mbn, size 14934572
603[ 10.225116] Bluetooth: HCI UART driver ver 2.3
604[ 10.225134] Bluetooth: HCI UART protocol H4 registered
605[ 10.225240] Bluetooth: HCI UART protocol LL registered
606[ 10.234873] Bluetooth: HCI UART protocol Broadcom registered
607[ 10.234967] Bluetooth: HCI UART protocol QCA registered
608[ 10.235120] Bluetooth: HCI UART protocol Marvell registered
609[ 10.254787] Bluetooth: hci0: setting up wcn399x
610[ 10.309454] input: aw8695-haptics as /devices/platform/soc@0/8c0000.geniqup/884000.i2c/i2c-1/1-005a/input/input4
611[ 10.318341] remoteproc remoteproc0: remote processor adsp is now up
612[ 10.330244] qcom,fastrpc 62400000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
613[ 10.331224] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 12
614[ 10.332542] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 13
615[ 10.333634] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 14
616[ 10.334856] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 15
617[ 10.335811] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 16
618[ 10.336770] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@8: Adding to iommu group 17
619[ 10.342752] PDR: Indication received from msm/adsp/audio_pd, state: 0x1fffffff, trans-id: 1
620[ 10.342934] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:3
621[ 10.343098] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:4
622[ 10.343168] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:7
623[ 10.343218] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:8
624[ 10.359536] q6asm-dai 62400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 18
625[ 10.373335] input: POCO X3 Headset Jack as /devices/platform/soc@0/soc@0:sound/sound/card0/input5
626[ 10.384636] Bluetooth: hci0: QCA Product ID :0x0000000a
627[ 10.384654] Bluetooth: hci0: QCA SOC Version :0x40010214
628[ 10.384657] Bluetooth: hci0: QCA ROM Version :0x00000201
629[ 10.384661] Bluetooth: hci0: QCA Patch Version:0x00000001
630[ 10.395365] Bluetooth: hci0: QCA controller version 0x02140201
631[ 10.395385] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
632[ 11.202948] Bluetooth: hci0: QCA Downloading qca/crnv21.bin
633[ 11.354968] Bluetooth: hci0: QCA setup on UART is completed
634[ 11.382543] Bluetooth: MGMT ver 1.23
635[ 11.555434] NET: Registered PF_INET6 protocol family
636[ 11.556885] Segment Routing with IPv6
637[ 11.556895] In-situ OAM (IOAM) with IPv6
638[ 11.750121] EXT4-fs (dm-5): re-mounted f770b9eb-ecd6-42ae-8d07-5ea86bf585a9 r/w. Quota mode: none.
639[ 11.802192] EXT4-fs (dm-4): mounting ext2 file system using the ext4 subsystem
640[ 11.804550] EXT4-fs (dm-4): mounted filesystem 01e23765-c941-4602-b872-eb21323f8002 r/w without journal. Quota mode: none.
641[ 12.274816] remoteproc remoteproc1: powering up modem
642[ 12.539700] remoteproc remoteproc1: Booting fw image qcom/sm7150/surya/modem.mbn, size 60827184
643[ 12.540022] ipa 1e40000.ipa: received modem starting event
644[ 12.619760] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
645[ 12.619774] Bluetooth: BNEP filters: protocol multicast
646[ 12.619788] Bluetooth: BNEP socket layer initialized
647[ 12.860753] ipa 1e40000.ipa: received modem running event
648[ 12.860761] remoteproc remoteproc1: remote processor modem is now up
649[ 13.712706] ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40090000
650[ 13.712733] ath10k_snoc 18800000.wifi: qmi fw_version 0x322283b3 fw_build_timestamp 2023-05-05 02:49 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.2-00947-QCAHLSWMTPLZ-1.26445.2.29154.2
651[ 16.865207] ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
652[ 16.865249] ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
653[ 16.865267] ath10k_snoc 18800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
654[ 16.912439] ath10k_snoc 18800000.wifi: htt-ver 3.89 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
655[ 17.013578] ath10k_snoc 18800000.wifi: invalid MAC address; choosing random
656[ 17.013881] ath: EEPROM regdomain: 0x0
657[ 17.013893] ath: EEPROM indicates default country code should be used
658[ 17.013900] ath: doing EEPROM country->regdmn map search
659[ 17.013910] ath: country maps to regdmn code: 0x3a
660[ 17.013919] ath: Country alpha2 being used: US
661[ 17.013927] ath: Regpair used: 0x3a
662[ 18.149375] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
663[ 19.659394] zram: Added device: zram0
664[ 19.683190] zram0: detected capacity change from 0 to 5668864
665[ 19.733472] Adding 2834428k swap on /dev/zram0. Priority:16383 extents:1 across:2834428k SSDsc
666[ 20.020887] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
667[ 22.288392] qcom-q6asm aprsvc:service:4:7: DSP returned error[1]
668[ 22.288408] q6asm-dai 62400000.remoteproc:glink-edge:apr:service@7:dais: Memory_map_regions failed
669[ 22.288413] q6asm-dai 62400000.remoteproc:glink-edge:apr:service@7:dais: Audio Start: Buffer Allocation failed rc = -22
670[ 22.288419] q6asm-dai 62400000.remoteproc:glink-edge:apr:service@7:dais: ASoC: error at snd_soc_pcm_component_prepare on 62400000.remoteproc:glink-edge:apr:service@7:dais: -12
671[ 22.321209] MultiMedia1: ASoC: no backend DAIs enabled for MultiMedia1, possibly missing ALSA mixer-based routing or UCM profile
672[ 22.457829] Bluetooth: RFCOMM TTY layer initialized
673[ 22.457879] Bluetooth: RFCOMM socket layer initialized
674[ 22.457920] Bluetooth: RFCOMM ver 1.11
675[ 25.061277] qcom-rpmhpd 18200000.rsc:power-controller: sync_state() pending due to 8300000.remoteproc