Last active 1721760742

JIaxyga's Avatar JIaxyga revised this gist 1721760742. Go to revision

1 file changed, 747 insertions

gistfile1.txt(file created)

@@ -0,0 +1,747 @@
1 + [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
2 + [ 0.000000] Linux version 6.10.0-next-20240722 (pmos@fedora) (aarch64-alpine-linux-musl-gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #116 SMP Tue Jul 23 18:46:00 UTC 2024
3 + [ 0.000000] KASLR enabled
4 + [ 0.000000] random: crng init done
5 + [ 0.000000] Machine model: Nothing Phone (1)
6 + [ 0.000000] efi: UEFI not found.
7 + [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
8 + [ 0.000000] OF: reserved mem: 0x00000000004cd000..0x00000000004cdfff (4 KiB) nomap non-reusable wlan-ce@4cd000
9 + [ 0.000000] OF: reserved mem: 0x0000000080000000..0x00000000805fffff (6144 KiB) nomap non-reusable hyp@80000000
10 + [ 0.000000] OF: reserved mem: 0x0000000080600000..0x00000000807fffff (2048 KiB) nomap non-reusable xbl@80600000
11 + [ 0.000000] OF: reserved mem: 0x0000000080800000..0x000000008085ffff (384 KiB) nomap non-reusable aop@80800000
12 + [ 0.000000] OF: reserved mem: 0x0000000080860000..0x000000008087ffff (128 KiB) nomap non-reusable aop-cmd-db@80860000
13 + [ 0.000000] OF: reserved mem: 0x0000000080884000..0x0000000080893fff (64 KiB) nomap non-reusable xbl-uefi-res@80880000
14 + [ 0.000000] OF: reserved mem: 0x00000000808ff000..0x00000000808fffff (4 KiB) nomap non-reusable sec-apps@808ff000
15 + [ 0.000000] OF: reserved mem: 0x0000000080900000..0x0000000080afffff (2048 KiB) nomap non-reusable smem@80900000
16 + [ 0.000000] OF: reserved mem: 0x0000000080b00000..0x0000000080bfffff (1024 KiB) nomap non-reusable cpucp@80b00000
17 + [ 0.000000] OF: reserved mem: 0x0000000080c00000..0x00000000817fffff (12288 KiB) nomap non-reusable wlan-fw@80c00000
18 + [ 0.000000] OF: reserved mem: 0x0000000083a00000..0x0000000083dfffff (4096 KiB) map non-reusable ramoops@83a00000
19 + [ 0.000000] OF: reserved mem: 0x0000000086700000..0x0000000088efffff (40960 KiB) nomap non-reusable adsp@86700000
20 + [ 0.000000] OF: reserved mem: 0x0000000088f00000..0x000000008acfffff (30720 KiB) nomap non-reusable cdsp@88f00000
21 + [ 0.000000] OF: reserved mem: 0x000000008b200000..0x000000008b6fffff (5120 KiB) nomap non-reusable video@8b200000
22 + [ 0.000000] OF: reserved mem: 0x000000008b700000..0x000000008b70ffff (64 KiB) nomap non-reusable ipa-fw@8b700000
23 + [ 0.000000] OF: reserved mem: 0x000000008b71a000..0x000000008b71bfff (8 KiB) nomap non-reusable zap@8b71a000
24 + [ 0.000000] OF: reserved mem: 0x000000008b800000..0x000000009adfffff (251904 KiB) nomap non-reusable mpss@8b800000
25 + [ 0.000000] OF: reserved mem: 0x000000009ae00000..0x000000009c6fffff (25600 KiB) nomap non-reusable wpss@9ae00000
26 + [ 0.000000] OF: reserved mem: 0x00000000c0000000..0x00000000c50fffff (82944 KiB) nomap non-reusable removed@c0000000
27 + [ 0.000000] OF: reserved mem: 0x00000000e1000000..0x00000000e19e33ff (10125 KiB) nomap non-reusable cont-splash@e1000000
28 + [ 0.000000] OF: reserved mem: 0x00000000f8500000..0x00000000f8afffff (6144 KiB) nomap non-reusable rmtfs@f8500000
29 + [ 0.000000] NUMA: No NUMA configuration found
30 + [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000037fffffff]
31 + [ 0.000000] NUMA: NODE_DATA [mem 0x37e84b9c0-0x37e84dfff]
32 + [ 0.000000] Zone ranges:
33 + [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
34 + [ 0.000000] DMA32 empty
35 + [ 0.000000] Normal [mem 0x0000000100000000-0x000000037fffffff]
36 + [ 0.000000] Movable zone start for each node
37 + [ 0.000000] Early memory node ranges
38 + [ 0.000000] node 0: [mem 0x0000000080000000-0x000000008087ffff]
39 + [ 0.000000] node 0: [mem 0x0000000080880000-0x0000000080883fff]
40 + [ 0.000000] node 0: [mem 0x0000000080884000-0x0000000080893fff]
41 + [ 0.000000] node 0: [mem 0x0000000080894000-0x00000000808fefff]
42 + [ 0.000000] node 0: [mem 0x00000000808ff000-0x00000000817fffff]
43 + [ 0.000000] node 0: [mem 0x0000000081800000-0x00000000866fffff]
44 + [ 0.000000] node 0: [mem 0x0000000086700000-0x000000008acfffff]
45 + [ 0.000000] node 0: [mem 0x000000008ad00000-0x000000008b1fffff]
46 + [ 0.000000] node 0: [mem 0x000000008b200000-0x000000008b70ffff]
47 + [ 0.000000] node 0: [mem 0x000000008b710000-0x000000008b719fff]
48 + [ 0.000000] node 0: [mem 0x000000008b71a000-0x000000008b71bfff]
49 + [ 0.000000] node 0: [mem 0x000000008b71c000-0x000000008b7fffff]
50 + [ 0.000000] node 0: [mem 0x000000008b800000-0x000000009c6fffff]
51 + [ 0.000000] node 0: [mem 0x000000009c700000-0x00000000b74fffff]
52 + [ 0.000000] node 0: [mem 0x00000000c0000000-0x00000000c50fffff]
53 + [ 0.000000] node 0: [mem 0x00000000c5100000-0x00000000e0ffffff]
54 + [ 0.000000] node 0: [mem 0x00000000e1000000-0x00000000e19e2fff]
55 + [ 0.000000] node 0: [mem 0x00000000e19e4000-0x00000000f84fffff]
56 + [ 0.000000] node 0: [mem 0x00000000f8500000-0x00000000f8afffff]
57 + [ 0.000000] node 0: [mem 0x00000000f8b00000-0x000000037fffffff]
58 + [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000037fffffff]
59 + [ 0.000000] On node 0, zone DMA: 2816 pages in unavailable ranges
60 + [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
61 + [ 0.000000] psci: probing for conduit method from DT.
62 + [ 0.000000] psci: PSCIv1.1 detected in firmware.
63 + [ 0.000000] psci: Using standard PSCI v0.2 function IDs
64 + [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
65 + [ 0.000000] psci: SMC Calling Convention v1.0
66 + [ 0.000000] psci: OSI mode supported.
67 + [ 0.000000] percpu: Embedded 22 pages/cpu s51352 r8192 d30568 u90112
68 + [ 0.000000] pcpu-alloc: s51352 r8192 d30568 u90112 alloc=22*4096
69 + [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
70 + [ 0.000000] Detected VIPT I-cache on CPU0
71 + [ 0.000000] CPU features: detected: GIC system register CPU interface
72 + [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
73 + [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
74 + [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
75 + [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
76 + [ 0.000000] alternatives: applying boot alternatives
77 + [ 0.000000] Kernel command line: console=tty0 pmos_boot_uuid=22c3f7fd-df49-4c76-8d45-71ed07a760f9 pmos_root_uuid=d97ee491-e00c-4dce-8cf7-7837f62ebc1c pmos_rootfsopts=defaults androidboot.verifiedbootstate=orange androidboot.keymaster=1 androidboot.vbmeta.device=PARTUUID=81065d5f-e827-38c2-7e21-91f6a7a7ee21 androidboot.vbmeta.avb_version=1.0 androidboot.vbmeta.device_state=unlocked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=7872 androidboot.vbmeta.digest=fd44b195178908cb69efe7245928f8ff591d1fccd2c07c07740bd4ddd52d3cf5 androidboot.vbmeta.invalidate_on_error=yes androidboot.veritymode=enforcing androidboot.bootloader=00872-LAHAINA-2.487493.1 androidboot.expect.baseband=00781-LC_ALL_PACK-1 androidboot.fuse_state=1 androidboot.ddr_size=12288 androidboot.aging_build=false androidboot.hardware.sku=ROW androidboot.bootdevice=1d84000.ufshc androidboot.fstab_suffix=default androidboot.boot_devices=soc/1d84000.ufshc androidboot.serialno=185fdeee androidboot.baseband=msm msm_drm.dsi_display0=qcom,mdss_dsi_rm692e5
78 + [ 0.000000] Unknown kernel command line parameters "pmos_boot_uuid=22c3f7fd-df49-4c76-8d45-71ed07a760f9 pmos_root_uuid=d97ee491-e00c-4dce-8cf7-7837f62ebc1c pmos_rootfsopts=defaults is_secure_fuse=1", will be passed to user space.
79 + [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
80 + [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
81 + [ 0.000000] Fallback order for Node 0: 0
82 + [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3110143
83 + [ 0.000000] Policy zone: Normal
84 + [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
85 + [ 0.000000] software IO TLB: area num 8.
86 + [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
87 + [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
88 + [ 0.000000] rcu: Hierarchical RCU implementation.
89 + [ 0.000000] rcu: RCU event tracing is enabled.
90 + [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
91 + [ 0.000000] Tracing variant of Tasks RCU enabled.
92 + [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
93 + [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
94 + [ 0.000000] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
95 + [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
96 + [ 0.000000] GICv3: 988 SPIs implemented
97 + [ 0.000000] GICv3: 0 Extended SPIs implemented
98 + [ 0.000000] Root IRQ handler: gic_handle_irq
99 + [ 0.000000] GICv3: GICv3 features: 16 PPIs
100 + [ 0.000000] GICv3: GICD_CTRL.DS=1, SCR_EL3.FIQ=0
101 + [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
102 + [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
103 + [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
104 + [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
105 + [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
106 + [ 0.000187] Console: colour dummy device 80x25
107 + [ 0.000198] printk: legacy console [tty0] enabled
108 + [ 0.000744] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
109 + [ 0.000761] pid_max: default: 32768 minimum: 301
110 + [ 0.000894] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
111 + [ 0.000931] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
112 + [ 0.002631] rcu: Hierarchical SRCU implementation.
113 + [ 0.002646] rcu: Max phase no-delay instances is 1000.
114 + [ 0.002778] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
115 + [ 0.002802] ------------[ cut here ]------------
116 + [ 0.002810] WARNING: CPU: 0 PID: 1 at kernel/time/timer_migration.c:1714 tmigr_cpu_prepare+0x5cc/0x704
117 + [ 0.002826] Modules linked in:
118 + [ 0.002834] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-next-20240722 #116
119 + [ 0.002839] Hardware name: Nothing Phone (1) (DT)
120 + [ 0.002843] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
121 + [ 0.002848] pc : tmigr_cpu_prepare+0x5cc/0x704
122 + [ 0.002854] lr : cpuhp_invoke_callback+0x104/0x1f8
123 + [ 0.002864] sp : ffff80008005bb70
124 + [ 0.002866] x29: ffff80008005bbe0 x28: ffff1db672955cb0 x27: ffffd73da3edbdf0
125 + [ 0.002874] x26: 0000000000000000 x25: 0000000000000001 x24: ffffd73da2d84400
126 + [ 0.002880] x23: ffffd73da3cd9cb0 x22: ffffd73da3ee7e08 x21: 0000000000000000
127 + [ 0.002887] x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000006
128 + [ 0.002894] x17: 6f72632031203b70 x16: 756f726720726570 x15: 0720072007200720
129 + [ 0.002901] x14: 0720072007200720 x13: ffffd73da3eee2f8 x12: 0000000000000156
130 + [ 0.002908] x11: 0000000000000072 x10: ffffd73da3f462f8 x9 : ffffd73da3eee2f8
131 + [ 0.002914] x8 : 0000000000000001 x7 : ffffd73da3edb000 x6 : ffffd73da3ee7408
132 + [ 0.002921] x5 : ffff1db672951580 x4 : 0000000000000000 x3 : ffff4678cec7c000
133 + [ 0.002928] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffd73da3cd9cb0
134 + [ 0.002935] Call trace:
135 + [ 0.002938] tmigr_cpu_prepare+0x5cc/0x704
136 + [ 0.002945] cpuhp_invoke_callback+0x104/0x1f8
137 + [ 0.002952] cpuhp_issue_call+0x58/0x1d4
138 + [ 0.002958] __cpuhp_setup_state_cpuslocked+0x114/0x2d8
139 + [ 0.002967] __cpuhp_setup_state+0x64/0x124
140 + [ 0.002975] tmigr_init+0x124/0x19c
141 + [ 0.002982] do_one_initcall+0x80/0x1c8
142 + [ 0.002989] kernel_init_freeable+0xfc/0x2e8
143 + [ 0.002997] kernel_init+0x20/0x1d8
144 + [ 0.003005] ret_from_fork+0x10/0x20
145 + [ 0.003011] ---[ end trace 0000000000000000 ]---
146 + [ 0.003222] EFI services will not be available.
147 + [ 0.003437] smp: Bringing up secondary CPUs ...
148 + [ 0.004147] Detected VIPT I-cache on CPU1
149 + [ 0.004212] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
150 + [ 0.004290] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
151 + [ 0.005106] Detected VIPT I-cache on CPU2
152 + [ 0.005164] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
153 + [ 0.005232] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
154 + [ 0.005974] Detected VIPT I-cache on CPU3
155 + [ 0.006023] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
156 + [ 0.006086] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
157 + [ 0.008013] CPU features: detected: Spectre-v4
158 + [ 0.008029] CPU features: detected: Spectre-BHB
159 + [ 0.008110] Detected PIPT I-cache on CPU4
160 + [ 0.008217] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
161 + [ 0.008345] CPU4: Booted secondary processor 0x0000000400 [0x411fd411]
162 + [ 0.009418] Detected PIPT I-cache on CPU5
163 + [ 0.009544] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
164 + [ 0.009680] CPU5: Booted secondary processor 0x0000000500 [0x411fd411]
165 + [ 0.010772] Detected PIPT I-cache on CPU6
166 + [ 0.010901] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
167 + [ 0.011030] CPU6: Booted secondary processor 0x0000000600 [0x411fd411]
168 + [ 0.013051] Detected PIPT I-cache on CPU7
169 + [ 0.013110] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
170 + [ 0.013173] CPU7: Booted secondary processor 0x0000000700 [0x411fd411]
171 + [ 0.013257] smp: Brought up 1 node, 8 CPUs
172 + [ 0.013355] SMP: Total of 8 processors activated.
173 + [ 0.013362] CPU: All CPU(s) started at EL1
174 + [ 0.013369] CPU features: detected: 32-bit EL0 Support
175 + [ 0.013377] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
176 + [ 0.013386] CPU features: detected: Common not Private translations
177 + [ 0.013393] CPU features: detected: CRC32 instructions
178 + [ 0.013403] CPU features: detected: RCpc load-acquire (LDAPR)
179 + [ 0.013409] CPU features: detected: LSE atomic instructions
180 + [ 0.013416] CPU features: detected: Privileged Access Never
181 + [ 0.013422] CPU features: detected: RAS Extension Support
182 + [ 0.013431] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
183 + [ 0.013508] alternatives: applying system-wide alternatives
184 + [ 0.017140] CPU features: detected: Hardware dirty bit management on CPU4-7
185 + [ 0.017416] Memory: 11616660K/12440572K available (11328K kernel code, 1326K rwdata, 4496K rodata, 2816K init, 484K bss, 819580K reserved, 0K cma-reserved)
186 + [ 0.020203] devtmpfs: initialized
187 + [ 0.029251] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
188 + [ 0.029273] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
189 + [ 0.029338] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
190 + [ 0.029345] 0 pages in range for non-PLT usage
191 + [ 0.029348] 519120 pages in range for PLT usage
192 + [ 0.029398] pinctrl core: initialized pinctrl subsystem
193 + [ 0.029679] DMI not present or invalid.
194 + [ 0.030148] NET: Registered PF_NETLINK/PF_ROUTE protocol family
195 + [ 0.030642] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
196 + [ 0.030778] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
197 + [ 0.030905] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
198 + [ 0.031099] thermal_sys: Registered thermal governor 'step_wise'
199 + [ 0.031103] thermal_sys: Registered thermal governor 'power_allocator'
200 + [ 0.031164] cpuidle: using governor menu
201 + [ 0.031216] NET: Registered PF_QIPCRTR protocol family
202 + [ 0.031361] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
203 + [ 0.031504] ASID allocator initialised with 32768 entries
204 + [ 0.031610] Serial: AMBA PL011 UART driver
205 + [ 0.033452] CPUidle PSCI: Initialized CPU PM domain topology using OSI mode
206 + [ 0.043835] platform 1d84000.ufs: Fixed dependency cycle(s) with /soc@0/phy@1d87000
207 + [ 0.043913] platform 1d84000.ufs: Fixed dependency cycle(s) with /soc@0/phy@1d87000
208 + [ 0.043958] platform 1d87000.phy: Fixed dependency cycle(s) with /soc@0/ufs@1d84000
209 + [ 0.045424] amba 6002000.stm: Fixed dependency cycle(s) with /soc@0/funnel@6041000
210 + [ 0.045488] amba 6002000.stm: Fixed dependency cycle(s) with /soc@0/funnel@6041000
211 + [ 0.045521] amba 6041000.funnel: Fixed dependency cycle(s) with /soc@0/stm@6002000
212 + [ 0.045562] amba 6041000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6045000
213 + [ 0.045614] amba 6042000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@7810000
214 + [ 0.045630] amba 6042000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6045000
215 + [ 0.045675] amba 6042000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6045000
216 + [ 0.045718] amba 6041000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6045000
217 + [ 0.045755] amba 6045000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6042000
218 + [ 0.045783] amba 6045000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6041000
219 + [ 0.045814] amba 6045000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6b04000
220 + [ 0.045869] amba 6046000.replicator: Fixed dependency cycle(s) with /soc@0/replicator@6b06000
221 + [ 0.045881] amba 6046000.replicator: Fixed dependency cycle(s) with /soc@0/etr@6048000
222 + [ 0.045922] amba 6046000.replicator: Fixed dependency cycle(s) with /soc@0/etr@6048000
223 + [ 0.045964] amba 6048000.etr: Fixed dependency cycle(s) with /soc@0/replicator@6046000
224 + [ 0.046027] amba 6045000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6b04000
225 + [ 0.046065] amba 6b04000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6045000
226 + [ 0.046096] amba 6b04000.funnel: Fixed dependency cycle(s) with /soc@0/etf@6b05000
227 + [ 0.046140] amba 6b04000.funnel: Fixed dependency cycle(s) with /soc@0/etf@6b05000
228 + [ 0.046179] amba 6b05000.etf: Fixed dependency cycle(s) with /soc@0/funnel@6b04000
229 + [ 0.046207] amba 6b05000.etf: Fixed dependency cycle(s) with /soc@0/replicator@6b06000
230 + [ 0.046254] amba 6b05000.etf: Fixed dependency cycle(s) with /soc@0/replicator@6b06000
231 + [ 0.046296] amba 6046000.replicator: Fixed dependency cycle(s) with /soc@0/replicator@6b06000
232 + [ 0.046335] amba 6b06000.replicator: Fixed dependency cycle(s) with /soc@0/etf@6b05000
233 + [ 0.046364] amba 6b06000.replicator: Fixed dependency cycle(s) with /soc@0/replicator@6046000
234 + [ 0.046438] amba 7040000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
235 + [ 0.046491] amba 7140000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
236 + [ 0.046546] amba 7240000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
237 + [ 0.046597] amba 7340000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
238 + [ 0.046648] amba 7440000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
239 + [ 0.046698] amba 7540000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
240 + [ 0.046748] amba 7640000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
241 + [ 0.046798] amba 7740000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
242 + [ 0.046854] amba 7740000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
243 + [ 0.046895] amba 7640000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
244 + [ 0.046936] amba 7540000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
245 + [ 0.046973] amba 7440000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
246 + [ 0.047011] amba 7340000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
247 + [ 0.047050] amba 7240000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
248 + [ 0.047088] amba 7140000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
249 + [ 0.047128] amba 7040000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
250 + [ 0.047155] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/etm@7740000
251 + [ 0.047180] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/etm@7640000
252 + [ 0.047207] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/etm@7540000
253 + [ 0.047233] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/etm@7440000
254 + [ 0.047260] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/etm@7340000
255 + [ 0.047287] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/etm@7240000
256 + [ 0.047313] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/etm@7140000
257 + [ 0.047340] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/etm@7040000
258 + [ 0.047374] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@7810000
259 + [ 0.047430] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@7810000
260 + [ 0.047465] amba 6042000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@7810000
261 + [ 0.047500] amba 7810000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@7800000
262 + [ 0.047534] amba 7810000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6042000
263 + [ 0.049027] platform af00000.clock-controller: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/phy@ae94400
264 + [ 0.049258] platform ae00000.display-subsystem: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000
265 + [ 0.054678] platform 18200000.rsc:regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps1
266 + [ 0.054701] platform 18200000.rsc:regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps8
267 + [ 0.054718] platform 18200000.rsc:regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps7
268 + [ 0.054797] platform 18200000.rsc:regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps7
269 + [ 0.054811] platform 18200000.rsc:regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-1/bob
270 + [ 0.054825] platform 18200000.rsc:regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps1
271 + [ 0.056406] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
272 + [ 0.056419] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
273 + [ 0.056428] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
274 + [ 0.056435] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
275 + [ 0.056442] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
276 + [ 0.056448] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
277 + [ 0.056454] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
278 + [ 0.056460] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
279 + [ 0.060060] iommu: Default domain type: Translated
280 + [ 0.060071] iommu: DMA domain TLB invalidation policy: strict mode
281 + [ 0.060617] SCSI subsystem initialized
282 + [ 0.060719] usbcore: registered new interface driver usbfs
283 + [ 0.060738] usbcore: registered new interface driver hub
284 + [ 0.060758] usbcore: registered new device driver usb
285 + [ 0.060827] mc: Linux media interface: v0.10
286 + [ 0.060847] videodev: Linux video capture interface: v2.00
287 + [ 0.060864] pps_core: LinuxPPS API ver. 1 registered
288 + [ 0.060869] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
289 + [ 0.060880] PTP clock support registered
290 + [ 0.060936] scmi_core: SCMI protocol bus registered
291 + [ 0.061006] qcom_scm: convention: smc arm 64
292 + [ 0.061440] Advanced Linux Sound Architecture Driver Initialized.
293 + [ 0.062032] clocksource: Switched to clocksource arch_sys_counter
294 + [ 0.062161] VFS: Disk quotas dquot_6.6.0
295 + [ 0.062178] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
296 + [ 0.066198] NET: Registered PF_INET protocol family
297 + [ 0.066450] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
298 + [ 0.075381] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
299 + [ 0.075434] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
300 + [ 0.075450] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
301 + [ 0.075756] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
302 + [ 0.077153] TCP: Hash tables configured (established 131072 bind 65536)
303 + [ 0.077227] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
304 + [ 0.077312] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
305 + [ 0.077455] NET: Registered PF_UNIX/PF_LOCAL protocol family
306 + [ 0.077637] Unpacking initramfs...
307 + [ 0.082934] Initialise system trusted keyrings
308 + [ 0.083054] workingset: timestamp_bits=42 max_order=22 bucket_order=0
309 + [ 0.115825] NET: Registered PF_ALG protocol family
310 + [ 0.115847] Key type asymmetric registered
311 + [ 0.115854] Asymmetric key parser 'x509' registered
312 + [ 0.115901] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
313 + [ 0.116030] io scheduler mq-deadline registered
314 + [ 0.116045] io scheduler kyber registered
315 + [ 0.136232] qcom-ice 1d88000.crypto: Found QC Inline Crypto Engine (ICE) v3.2.0
316 + [ 0.136877] vreg_s1c_2p2: Setting 2190000-2210000uV
317 + [ 0.137069] vreg_s9c_0p676: Setting 1010000-1170000uV
318 + [ 0.137183] vreg_l1c_1p8: Setting 1800000-1980000uV
319 + [ 0.137375] vreg_l2c_1p8: Setting 1620000-1980000uV
320 + [ 0.137556] vreg_l3c_3p0: Setting 2800000-3540000uV
321 + [ 0.137724] vreg_l4c_1p8_3p0: Setting 1620000-3300000uV
322 + [ 0.137892] vreg_l5c_1p8_3p0: Setting 1620000-3300000uV
323 + [ 0.138103] vreg_l6c_2p96: Setting 1650000-3544000uV
324 + [ 0.138282] vreg_l7c_3p0: Setting 3000000-3544000uV
325 + [ 0.138462] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
326 + [ 0.138463] vreg_l8c_1p8: Setting 1620000-2000000uV
327 + [ 0.138629] vreg_l9c_2p96: Setting 2700000-3544000uV
328 + [ 0.138834] vreg_l10c_0p88: Setting 720000-1050000uV
329 + [ 0.139048] vreg_l11c_2p8: Setting 2800000-3544000uV
330 + [ 0.139324] vreg_l12c_1p8: Setting 1650000-2000000uV
331 + [ 0.139471] msm_serial: driver initialized
332 + [ 0.139537] vreg_l13c_3p0: Setting 2700000-3544000uV
333 + [ 0.139753] vreg_bob: Setting 3008000-3960000uV
334 + [ 0.140355] arm-smmu 3da0000.iommu: probing hardware configuration...
335 + [ 0.140366] arm-smmu 3da0000.iommu: SMMUv2 with:
336 + [ 0.140392] arm-smmu 3da0000.iommu: stage 1 translation
337 + [ 0.140398] arm-smmu 3da0000.iommu: coherent table walk
338 + [ 0.140403] arm-smmu 3da0000.iommu: stream matching with 6 register groups
339 + [ 0.140423] arm-smmu 3da0000.iommu: 7 context banks (0 stage-2 only)
340 + [ 0.140446] arm-smmu 3da0000.iommu: Supported page sizes: 0x61311000
341 + [ 0.140452] arm-smmu 3da0000.iommu: Stage-1: 48-bit VA -> 36-bit IPA
342 + [ 0.140594] arm-smmu 3da0000.iommu: preserved 0 boot mappings
343 + [ 0.142448] arm-smmu 15000000.iommu: probing hardware configuration...
344 + [ 0.142456] arm-smmu 15000000.iommu: SMMUv2 with:
345 + [ 0.142470] arm-smmu 15000000.iommu: stage 1 translation
346 + [ 0.142475] arm-smmu 15000000.iommu: coherent table walk
347 + [ 0.142480] arm-smmu 15000000.iommu: stream matching with 75 register groups
348 + [ 0.142492] arm-smmu 15000000.iommu: 61 context banks (0 stage-2 only)
349 + [ 0.142846] arm-smmu 15000000.iommu: Supported page sizes: 0x61311000
350 + [ 0.142852] arm-smmu 15000000.iommu: Stage-1: 36-bit VA -> 36-bit IPA
351 + [ 0.142940] arm-smmu 15000000.iommu: preserved 0 boot mappings
352 + [ 0.145276] [drm] Initialized simpledrm 1.0.0 for e1000000.framebuffer on minor 0
353 + [ 0.170370] Console: switching to colour frame buffer device 135x150
354 + [ 0.183057] simple-framebuffer e1000000.framebuffer: [drm] fb0: simpledrmdrmfb frame buffer device
355 + [ 0.192968] loop: module loaded
356 + [ 0.193263] spmi_pmic_arb c440000.spmi: PMIC arbiter version v5 (0x50020000)
357 + [ 0.201119] tun: Universal TUN/TAP device driver, 1.6
358 + [ 0.201819] usbcore: registered new interface driver usb-storage
359 + [ 0.210266] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6100: registered as rtc0
360 + [ 0.210344] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6100: setting system clock to 1970-01-03T07:44:44 UTC (200684)
361 + [ 0.210417] i2c_dev: i2c /dev entries driver
362 + [ 0.211326] input: pmic_pwrkey as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@1300/c440000.spmi:pmic@0:pon@1300:pwrkey/input/input0
363 + [ 0.211950] input: pmic_resin as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@1300/c440000.spmi:pmic@0:pon@1300:resin/input/input1
364 + [ 0.221306] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
365 + [ 0.222321] sdhci: Secure Digital Host Controller Interface driver
366 + [ 0.222357] sdhci: Copyright(c) Pierre Ossman
367 + [ 0.222376] sdhci-pltfm: SDHCI platform and OF driver helper
368 + [ 0.223835] usbcore: registered new interface driver usbhid
369 + [ 0.223879] usbhid: USB HID core driver
370 + [ 0.226601] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
371 + [ 0.243250] NET: Registered PF_PACKET protocol family
372 + [ 0.243302] Key type dns_resolver registered
373 + [ 0.246106] Loading compiled-in X.509 certificates
374 + [ 0.249778] Demotion targets for Node 0: null
375 + [ 0.268235] cpu cpu0: EM: created perf domain
376 + [ 0.275904] cpu cpu4: EM: created perf domain
377 + [ 0.279447] Freeing initrd memory: 6512K
378 + [ 0.286268] cpu cpu7: EM: created perf domain
379 + [ 0.292278] gpi 900000.dma-controller: Adding to iommu group 0
380 + [ 0.293485] gpi a00000.dma-controller: Adding to iommu group 1
381 + [ 0.294836] bam-dma-engine 1dc4000.dma-controller: Adding to iommu group 2
382 + [ 0.295806] geni_se_qup 9c0000.geniqup: Adding to iommu group 3
383 + [ 0.298159] qcom_pmic_glink pmic-glink: Failed to create device link (0x180) with 1-0042
384 + [ 0.301036] 994000.serial: ttyMSM0 at MMIO 0x994000 (irq = 148, base_baud = 0) is a MSM
385 + [ 0.302808] 99c000.serial: ttyHS1 at MMIO 0x99c000 (irq = 149, base_baud = 0) is a MSM
386 + [ 0.303222] serial serial0: tty port ttyHS1 registered
387 + [ 0.304442] geni_se_qup ac0000.geniqup: Adding to iommu group 4
388 + [ 0.311193] vreg_s1b_1p856: Setting 1840000-2040000uV
389 + [ 0.311294] vreg_s7b_0p952: Setting 535000-1120000uV
390 + [ 0.311388] vreg_s8b_1p256: Setting 1200000-1500000uV
391 + [ 0.311762] vreg_l1b_0p912: Setting 825000-925000uV
392 + [ 0.311878] vreg_l2b_3p072: Setting 2700000-3544000uV
393 + [ 0.312215] vreg_l3b_0p6: Setting 312000-910000uV
394 + [ 0.312349] vreg_l6b_1p2: Setting 1140000-1260000uV
395 + [ 0.312716] vreg_l7b_2p96: Setting 2952000-2952000uV
396 + [ 0.312733] msm-mdss ae00000.display-subsystem: Adding to iommu group 5
397 + [ 0.312828] vreg_l8b_0p904: Setting 870000-970000uV
398 + [ 0.312904] vreg_l9b_1p2: Setting 1200000-1304000uV
399 + [ 0.312970] vreg_l11b_1p776: Setting 1504000-2000000uV
400 + [ 0.313039] vreg_l12b_0p8: Setting 751000-824000uV
401 + [ 0.313102] vreg_l13b_0p8: Setting 530000-824000uV
402 + [ 0.313167] vreg_l14b_1p2: Setting 1080000-1304000uV
403 + [ 0.313172] platform ae01000.display-controller: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
404 + [ 0.313232] vreg_l15b_0p88: Setting 765000-1020000uV
405 + [ 0.313370] vreg_l16b_1p2: Setting 1100000-1300000uV
406 + [ 0.313460] vreg_l17b_1p8: Setting 1700000-1900000uV
407 + [ 0.313531] vreg_l18b_1p8: Setting 1800000-2000000uV
408 + [ 0.313593] vreg_l19b_1p8: Setting 1800000-2000000uV
409 + [ 0.313859] platform ae01000.display-controller: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
410 + [ 0.313995] platform ae94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0
411 + [ 0.314105] platform ae94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/display-controller@ae01000
412 + [ 0.321461] qcom_pmic_glink pmic-glink: Failed to create device link (0x180) with a600000.usb
413 + [ 0.322910] i2c-qcom-cci ac4a000.cci: Found 19200000 cci clk rate while 37500000 was expected
414 + [ 0.324170] i2c-qcom-cci ac4b000.cci: Found 19200000 cci clk rate while 37500000 was expected
415 + [ 0.340723] ufshcd-qcom 1d84000.ufs: Adding to iommu group 6
416 + [ 0.341690] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
417 + [ 0.341817] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
418 + [ 0.367561] qcrypto 1dfa000.crypto: Adding to iommu group 2
419 + [ 0.377682] adreno 3d00000.gpu: Adding to iommu group 7
420 + [ 0.379028] msm_dsi ae94000.dsi: supply refgen not found, using dummy regulator
421 + [ 0.379453] msm_dsi ae94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0
422 + [ 0.379587] mipi-dsi ae94000.dsi.0: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
423 + [ 0.379986] dwc3 a600000.usb: Adding to iommu group 8
424 + [ 0.383994] qcom_pmic_glink pmic-glink: Failed to create device link (0x180) with a600000.usb
425 + [ 0.386794] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
426 + [ 0.386991] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
427 + [ 0.393545] scsi host0: ufshcd
428 + [ 0.415748] input: gpio-keys as /devices/platform/gpio-keys/input/input2
429 + [ 0.422133] clk: Disabling unused clocks
430 + [ 0.423330] PM: genpd: Disabling unused power domains
431 + [ 0.423457] ALSA device list:
432 + [ 0.423493] No soundcards found.
433 + [ 0.472663] scsi 0:0:0:49488: Well-known LUN SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
434 + [ 0.476411] scsi 0:0:0:49476: Well-known LUN SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
435 + [ 0.478214] thermal thermal_zone0: Temperature check failed (-19)
436 + [ 0.478318] scsi 0:0:0:49456: Well-known LUN SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
437 + [ 0.481184] scsi 0:0:0:0: Direct-Access SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
438 + [ 0.483569] sd 0:0:0:0: [sda] 60884992 4096-byte logical blocks: (249 GB/232 GiB)
439 + [ 0.483819] scsi 0:0:0:1: Direct-Access SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
440 + [ 0.484269] sd 0:0:0:0: [sda] Write Protect is off
441 + [ 0.484338] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
442 + [ 0.484746] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
443 + [ 0.485065] sd 0:0:0:0: [sda] Preferred minimum I/O size 524288 bytes
444 + [ 0.485146] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
445 + [ 0.485949] scsi 0:0:0:2: Direct-Access SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
446 + [ 0.486119] sd 0:0:0:1: [sdb] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
447 + [ 0.486483] sd 0:0:0:1: [sdb] Write Protect is off
448 + [ 0.486529] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
449 + [ 0.486822] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
450 + [ 0.487067] sd 0:0:0:1: [sdb] Preferred minimum I/O size 524288 bytes
451 + [ 0.487122] sd 0:0:0:1: [sdb] Optimal transfer size 524288 bytes
452 + [ 0.489150] scsi 0:0:0:3: Direct-Access SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
453 + [ 0.489177] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
454 + [ 0.489478] sd 0:0:0:2: [sdc] Write Protect is off
455 + [ 0.489527] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
456 + [ 0.489942] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
457 + [ 0.490308] sd 0:0:0:2: [sdc] Preferred minimum I/O size 524288 bytes
458 + [ 0.490392] sd 0:0:0:2: [sdc] Optimal transfer size 524288 bytes
459 + [ 0.491234] scsi 0:0:0:4: Direct-Access SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
460 + [ 0.493239] sd 0:0:0:3: [sdd] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB)
461 + [ 0.493289] sd 0:0:0:4: [sde] 1572864 4096-byte logical blocks: (6.44 GB/6.00 GiB)
462 + [ 0.493296] scsi 0:0:0:5: Direct-Access SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
463 + [ 0.493439] sd 0:0:0:4: [sde] Write Protect is off
464 + [ 0.493480] sd 0:0:0:3: [sdd] Write Protect is off
465 + [ 0.493488] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
466 + [ 0.493497] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
467 + [ 0.493645] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
468 + [ 0.493702] sd 0:0:0:3: [sdd] Preferred minimum I/O size 524288 bytes
469 + [ 0.493716] sd 0:0:0:3: [sdd] Optimal transfer size 524288 bytes
470 + [ 0.494057] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
471 + [ 0.494283] sd 0:0:0:4: [sde] Preferred minimum I/O size 524288 bytes
472 + [ 0.495211] sd 0:0:0:5: [sdf] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB)
473 + [ 0.500819] sd 0:0:0:4: [sde] Optimal transfer size 524288 bytes
474 + [ 0.515118] sd 0:0:0:5: [sdf] Write Protect is off
475 + [ 0.519729] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
476 + [ 0.524863] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
477 + [ 0.529640] sd 0:0:0:5: [sdf] Preferred minimum I/O size 524288 bytes
478 + [ 0.534267] sd 0:0:0:5: [sdf] Optimal transfer size 524288 bytes
479 + [ 0.550063] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11
480 + [ 0.555335] sdb: sdb1 sdb2
481 + [ 0.555610] sdd: sdd1 sdd2 sdd3
482 + [ 0.556378] sd 0:0:0:0: [sda] Attached SCSI disk
483 + [ 0.556439] sdc: sdc1 sdc2
484 + [ 0.556887] sd 0:0:0:2: [sdc] Attached SCSI disk
485 + [ 0.561152] sd 0:0:0:1: [sdb] Attached SCSI disk
486 + [ 0.563641] sd 0:0:0:3: [sdd] Attached SCSI disk
487 + [ 0.599489] sdf: sdf1 sdf2 sdf3 sdf4 sdf5
488 + [ 0.604519] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54 sde55 sde56 sde57 sde58 sde59 sde60 sde61 sde62 sde63 sde64 sde65 sde66 sde67
489 + [ 0.629488] sd 0:0:0:4: [sde] Attached SCSI disk
490 + [ 0.642156] sd 0:0:0:5: [sdf] Attached SCSI disk
491 + [ 0.647832] Freeing unused kernel memory: 2816K
492 + [ 0.652683] Run /init as init process
493 + [ 0.657382] with arguments:
494 + [ 0.662050] /init
495 + [ 0.666651] with environment:
496 + [ 0.671258] HOME=/
497 + [ 0.675851] TERM=linux
498 + [ 0.680423] pmos_boot_uuid=22c3f7fd-df49-4c76-8d45-71ed07a760f9
499 + [ 0.685024] pmos_root_uuid=d97ee491-e00c-4dce-8cf7-7837f62ebc1c
500 + [ 0.689595] pmos_rootfsopts=defaults
501 + [ 0.694160] is_secure_fuse=1
502 + [ 0.717632] syslogd started: BusyBox v1.36.1
503 + [ 0.719967] udevd[170]: starting version 3.2.14
504 + [ 0.730887] udevd[173]: starting eudev-3.2.14
505 + [ 0.732699] [pmOS-rd]: Configuring kernel firmware image search path
506 + [ 0.738483] thermal thermal_zone0: Temperature check failed (-19)
507 + [ 0.754441] udevd[183]: failed to execute '/usr/libexec/elogind/elogind-uaccess-command' '/usr/libexec/elogind/elogind-uaccess-command /dev/dri/card0 ': No such file or directory
508 + [ 0.768325] udevd[191]: ctx=0xffff9e8bad80 path=/lib/modules/6.10.0-next-20240722/kernel/drivers/net/wireless/ath/ath11k/ath11k.ko error=No such file or directory
509 + [ 0.789419] udevd[191]: ctx=0xffff9e8bad80 path=/lib/modules/6.10.0-next-20240722/kernel/drivers/remoteproc/qcom_pil_info.ko error=No such file or directory
510 + [ 0.790210] udevd[187]: ctx=0xffff9e8bad80 path=/lib/modules/6.10.0-next-20240722/kernel/drivers/remoteproc/qcom_common.ko error=No such file or directory
511 + [ 0.797261] udevd[178]: ctx=0xffff9e8bad80 path=/lib/modules/6.10.0-next-20240722/kernel/drivers/remoteproc/qcom_pil_info.ko error=No such file or directory
512 + [ 0.798600] udevd[187]: ctx=0xffff9e8bad80 path=/lib/modules/6.10.0-next-20240722/kernel/drivers/remoteproc/qcom_pil_info.ko error=No such file or directory
513 + [ 0.803900] udevd[190]: ctx=0xffff9e8bad80 path=/lib/modules/6.10.0-next-20240722/kernel/drivers/remoteproc/qcom_pil_info.ko error=No such file or directory
514 + [ 0.804966] udevd[194]: ctx=0xffff9e8bad80 path=/lib/modules/6.10.0-next-20240722/kernel/drivers/media/v4l2-core/v4l2-mem2mem.ko error=No such file or directory
515 + [ 0.831717] udevd[198]: ctx=0xffff9e8bad80 path=/lib/modules/6.10.0-next-20240722/kernel/drivers/bluetooth/btqca.ko error=No such file or directory
516 + [ 0.833179] qcom_pmic_glink pmic-glink: Failed to create device link (0x180) with 1-0042
517 + [ 0.927346] udevd[214]: failed to execute '/usr/libexec/elogind/elogind-uaccess-command' '/usr/libexec/elogind/elogind-uaccess-command /dev/snd/timer ': No such file or directory
518 + [ 0.991707] [pmOS-rd]: Setting framebuffer mode to: U:1080x2400p-0
519 + [ 1.026633] thermal thermal_zone0: Temperature check failed (-19)
520 + [ 1.074055] [pmOS-rd]: Waiting for super partition /dev/sda6...
521 + [ 1.080632] [pmOS-rd]: Waiting for super partition /dev/sda6...
522 + [ 1.084454] [pmOS-rd]: device-mapper: create ioctl on odm_a failed: Resource busy
523 + [ 1.084807] [pmOS-rd]: device-mapper: create ioctl on product_a failed: Resource busy
524 + [ 1.085191] [pmOS-rd]: device-mapper: create ioctl on system_a failed: Resource busy
525 + [ 1.085586] [pmOS-rd]: device-mapper: create ioctl on system_ext_a failed: Resource busy
526 + [ 1.086051] [pmOS-rd]: device-mapper: create ioctl on vendor_a failed: Resource busy
527 + [ 1.087620] [pmOS-rd]: ls: /hooks: No such file or directory
528 + [ 1.088588] [pmOS-rd]: Setup usb network
529 + [ 1.088601] [pmOS-rd]: /sys/class/android_usb does not exist, skipping android_usb
530 + [ 1.088823] [pmOS-rd]: Setting up an USB gadget through configfs
531 + [ 1.096531] configfs-gadget.g1 gadget.0: HOST MAC 92:07:69:ee:2e:c0
532 + [ 1.096546] configfs-gadget.g1 gadget.0: MAC 86:90:a1:e0:22:cb
533 + [ 1.102819] [pmOS-rd]: Starting unudhcpd with server ip 172.16.42.1, client ip: 172.16.42.2
534 + [ 1.106092] [pmOS-rd]: Using interface usb0
535 + [ 1.106334] [pmOS-rd]: Starting the DHCP daemon
536 + [ 1.106860] [pmOS-rd]: Trying to start server with parameters: Server IP addr: 172.16.42.1:67, client IP addr: 172.16.42.2, interface: usb0
537 + [ 1.310469] thermal thermal_zone0: Temperature check failed (-19)
538 + [ 1.566981] thermal thermal_zone0: Temperature check failed (-19)
539 + [ 1.822376] thermal thermal_zone0: Temperature check failed (-19)
540 + [ 2.078347] thermal thermal_zone0: Temperature check failed (-19)
541 + [ 2.113838] [pmOS-rd]: Trying to mount subpartitions for 10 seconds...
542 + [ 2.334044] thermal thermal_zone0: Temperature check failed (-19)
543 + [ 2.590104] thermal thermal_zone0: Temperature check failed (-19)
544 + [ 2.846087] thermal thermal_zone0: Temperature check failed (-19)
545 + [ 3.102065] thermal thermal_zone0: Temperature check failed (-19)
546 + [ 3.358056] thermal thermal_zone0: Temperature check failed (-19)
547 + [ 3.618056] thermal thermal_zone0: Temperature check failed (-19)
548 + [ 3.902198] thermal thermal_zone0: Temperature check failed (-19)
549 + [ 4.158086] thermal thermal_zone0: Temperature check failed (-19)
550 + [ 4.418078] thermal thermal_zone0: Temperature check failed (-19)
551 + [ 4.567303] [pmOS-rd]: Mount subpartitions of /dev/sda11
552 + [ 4.674078] thermal thermal_zone0: Temperature check failed (-19)
553 + [ 4.930050] thermal thermal_zone0: Temperature check failed (-19)
554 + [ 5.182507] thermal thermal_zone0: Temperature check failed (-19)
555 + [ 5.438417] thermal thermal_zone0: Temperature check failed (-19)
556 + [ 5.698111] thermal thermal_zone0: Temperature check failed (-19)
557 + [ 5.982709] thermal thermal_zone0: Temperature check failed (-19)
558 + [ 6.238068] thermal thermal_zone0: Temperature check failed (-19)
559 + [ 6.494070] thermal thermal_zone0: Temperature check failed (-19)
560 + [ 6.608031] [pmOS-rd]: /dev/mapper/sda11p1
561 + [ 6.610671] [pmOS-rd]: Mount boot partition (/dev/mapper/sda11p1) to /boot (read-only)
562 + [ 6.613783] [pmOS-rd]: Detected ext filesystem
563 + [ 6.618843] EXT4-fs (dm-12): mounting ext2 file system using the ext4 subsystem
564 + [ 6.619777] EXT4-fs (dm-12): mounted filesystem 22c3f7fd-df49-4c76-8d45-71ed07a760f9 ro without journal. Quota mode: none.
565 + [ 6.621468] [pmOS-rd]: Extract /boot/initramfs-extra
566 + [ 6.688142] [pmOS-rd]: 8512 blocks
567 + [ 6.690230] [pmOS-rd]: ls: /hooks-extra: No such file or directory
568 + [ 6.754065] thermal thermal_zone0: Temperature check failed (-19)
569 + [ 7.010056] thermal thermal_zone0: Temperature check failed (-19)
570 + [ 7.298092] thermal thermal_zone0: Temperature check failed (-19)
571 + [ 7.308882] [pmOS-rd]: /dev/mapper/sda11p2
572 + [ 7.582094] thermal thermal_zone0: Temperature check failed (-19)
573 + [ 7.838688] thermal thermal_zone0: Temperature check failed (-19)
574 + [ 8.086920] [pmOS-rd]: Not resizing root partition (/dev/mapper/sda11p2): no free space left
575 + [ 8.093069] [pmOS-rd]: Mount root partition (/dev/mapper/sda11p2) to /sysroot (read-only) with options defaults
576 + [ 8.094462] thermal thermal_zone0: Temperature check failed (-19)
577 + [ 8.095451] [pmOS-rd]: Detected ext4 filesystem
578 + [ 8.103748] EXT4-fs (dm-13): INFO: recovery required on readonly filesystem
579 + [ 8.103762] EXT4-fs (dm-13): write access will be enabled during recovery
580 + [ 8.164018] EXT4-fs (dm-13): orphan cleanup on readonly fs
581 + [ 8.164426] EXT4-fs (dm-13): recovery complete
582 + [ 8.164979] EXT4-fs (dm-13): mounted filesystem d97ee491-e00c-4dce-8cf7-7837f62ebc1c ro with ordered data mode. Quota mode: none.
583 + [ 8.175813] EXT4-fs (dm-12): unmounting filesystem 22c3f7fd-df49-4c76-8d45-71ed07a760f9.
584 + [ 8.181607] [pmOS-rd]: Mount boot partition (/dev/mapper/sda11p1) to /sysroot/boot (read-write)
585 + [ 8.187479] [pmOS-rd]: Detected ext filesystem
586 + [ 8.198084] EXT4-fs (dm-12): mounting ext2 file system using the ext4 subsystem
587 + [ 8.199755] EXT4-fs (dm-12): warning: mounting unchecked fs, running e2fsck is recommended
588 + [ 8.200192] EXT4-fs (dm-12): mounted filesystem 22c3f7fd-df49-4c76-8d45-71ed07a760f9 r/w without journal. Quota mode: none.
589 + [ 8.204550] [pmOS-rd]: Switching root
590 + [ 8.292683] syslogd exiting
591 + [ 8.350231] thermal thermal_zone0: Temperature check failed (-19)
592 + [ 8.606117] thermal thermal_zone0: Temperature check failed (-19)
593 + [ 8.862078] thermal thermal_zone0: Temperature check failed (-19)
594 + [ 9.118075] thermal thermal_zone0: Temperature check failed (-19)
595 + [ 9.374090] thermal thermal_zone0: Temperature check failed (-19)
596 + [ 9.527048] udevd[1009]: starting version 3.2.14
597 + [ 9.575170] udevd[1009]: starting eudev-3.2.14
598 + [ 9.630186] thermal thermal_zone0: Temperature check failed (-19)
599 + [ 9.675069] cfg80211: Loading compiled-in X.509 certificates for regulatory database
600 + [ 9.682278] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
601 + [ 9.682410] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
602 + [ 9.685724] ipa 1e40000.ipa: Adding to iommu group 9
603 + [ 9.696152] sd 0:0:0:3: [sdd] Starting disk
604 + [ 9.702837] ipa 1e40000.ipa: limiting IPA memory size to 0x00003000
605 + [ 9.705608] ipa 1e40000.ipa: IPA driver initialized
606 + [ 9.718994] remoteproc remoteproc0: 4080000.remoteproc is available
607 + [ 9.732182] remoteproc remoteproc1: 3700000.remoteproc is available
608 + [ 9.736082] ath11k 17a10040.wifi: Adding to iommu group 10
609 + [ 9.736560] ath11k 17a10040.wifi: wcn6750 hw1.0
610 + [ 9.743024] qcom-venus aa00000.video-codec: Adding to iommu group 11
611 + [ 9.746094] qcom-venus aa00000.video-codec: non legacy binding
612 + [ 9.755181] ipa 1e40000.ipa: IPA driver setup completed successfully
613 + [ 9.764131] tfa987x 2-0034: Chip revision: 0x0b73
614 + [ 9.766162] remoteproc remoteproc2: 8a00000.remoteproc is available
615 + [ 9.776521] tfa987x 2-0035: Chip revision: 0x0b73
616 + [ 9.779137] remoteproc remoteproc3: a300000.remoteproc is available
617 + [ 9.779193] remoteproc remoteproc2: powering up 8a00000.remoteproc
618 + [ 9.793076] qcom-venus aa00000.video-codec: fail to load video firmware
619 + [ 9.793524] qcom-venus aa00000.video-codec: probe with driver qcom-venus failed with error -22
620 + [ 9.804838] remoteproc remoteproc3: powering up a300000.remoteproc
621 + [ 9.804849] remoteproc remoteproc3: Booting fw image qcom/sm7325/nothing/spacewar/cdsp.mbn, size 3465216
622 + [ 9.812208] remoteproc remoteproc2: Booting fw image qcom/sm7325/nothing/spacewar/wpss.mbn, size 7496496
623 + [ 9.816672] remoteproc remoteproc1: powering up 3700000.remoteproc
624 + [ 9.816682] remoteproc remoteproc1: Booting fw image qcom/sm7325/nothing/spacewar/adsp.mbn, size 18913104
625 + [ 9.886060] thermal thermal_zone0: Temperature check failed (-19)
626 + [ 9.889844] Bluetooth: Core ver 2.22
627 + [ 9.890512] NET: Registered PF_BLUETOOTH protocol family
628 + [ 9.890535] Bluetooth: HCI device and connection manager initialized
629 + [ 9.890563] Bluetooth: HCI socket layer initialized
630 + [ 9.890571] Bluetooth: L2CAP socket layer initialized
631 + [ 9.890592] Bluetooth: SCO socket layer initialized
632 + [ 9.959370] Bluetooth: HCI UART driver ver 2.3
633 + [ 9.959384] Bluetooth: HCI UART protocol H4 registered
634 + [ 9.961252] remoteproc remoteproc3: remote processor a300000.remoteproc is now up
635 + [ 9.961991] Bluetooth: HCI UART protocol QCA registered
636 + [ 10.000036] remoteproc remoteproc2: remote processor 8a00000.remoteproc is now up
637 + [ 10.009877] Bluetooth: hci0: setting up wcn6750
638 + [ 10.085427] remoteproc remoteproc1: remote processor 3700000.remoteproc is now up
639 + [ 10.090904] qcom,fastrpc a300000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
640 + [ 10.091395] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@1: Adding to iommu group 12
641 + [ 10.091647] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@2: Adding to iommu group 13
642 + [ 10.091829] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 14
643 + [ 10.092026] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 15
644 + [ 10.092203] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 16
645 + [ 10.092363] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 17
646 + [ 10.092561] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 18
647 + [ 10.092790] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@8: Adding to iommu group 19
648 + [ 10.093003] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@11: Adding to iommu group 20
649 + [ 10.093192] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@12: Adding to iommu group 21
650 + [ 10.093360] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@13: Adding to iommu group 22
651 + [ 10.093510] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@14: Adding to iommu group 23
652 + [ 10.093643] Bluetooth: hci0: Frame reassembly failed (-84)
653 + [ 10.093694] qcom,fastrpc 3700000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
654 + [ 10.093838] qcom,fastrpc-cb 3700000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 24
655 + [ 10.094052] qcom,fastrpc-cb 3700000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 25
656 + [ 10.094210] qcom,fastrpc-cb 3700000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 26
657 + [ 10.100020] PDR: Indication received from msm/adsp/audio_pd, state: 0x1fffffff, trans-id: 1
658 + [ 10.100101] qcom,apr 3700000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:3
659 + [ 10.100162] qcom,apr 3700000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:4
660 + [ 10.103079] qcom,apr 3700000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:7
661 + [ 10.103320] q6asm-dai 3700000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 27
662 + [ 10.103496] qcom,apr 3700000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:8
663 + [ 10.106672] tfa987x 2-0034: ASoC: sink widget PWUP overwritten
664 + [ 10.106683] tfa987x 2-0034: ASoC: sink widget Speaker overwritten
665 + [ 10.109437] PDR: Indication received from msm/adsp/charger_pd, state: 0x1fffffff, trans-id: 1
666 + [ 10.119523] input: NP1 Headset Jack as /devices/platform/sound/sound/card0/input3
667 + [ 10.138662] Bluetooth: hci0: QCA Product ID :0x00000015
668 + [ 10.138676] Bluetooth: hci0: QCA SOC Version :0x40140110
669 + [ 10.138679] Bluetooth: hci0: QCA ROM Version :0x00000101
670 + [ 10.138682] Bluetooth: hci0: QCA Patch Version:0x000024c7
671 + [ 10.146050] thermal thermal_zone0: Temperature check failed (-19)
672 + [ 10.154344] Bluetooth: hci0: QCA controller version 0x01100101
673 + [ 10.154475] Bluetooth: hci0: unexpected event for opcode 0xfc48
674 + [ 10.154853] Bluetooth: hci0: QCA Downloading qca/msbtfw11.mbn
675 + [ 10.206060] fuse: init (API version 7.40)
676 + [ 10.233863] NET: Registered PF_INET6 protocol family
677 + [ 10.234867] Segment Routing with IPv6
678 + [ 10.234892] In-situ OAM (IOAM) with IPv6
679 + [ 10.338964] ath11k 17a10040.wifi: chip_id 0x1 chip_family 0xb board_id 0xff soc_id 0xffffffff
680 + [ 10.338983] ath11k 17a10040.wifi: fw_version 0x10120330 fw_build_timestamp 2023-04-04 09:37 fw_build_id WLAN.MSL.1.0.1-00816-QCAMSLSWPLZ-1.517516.3.579317.3
681 + [ 10.411211] EXT4-fs (dm-13): re-mounted d97ee491-e00c-4dce-8cf7-7837f62ebc1c r/w. Quota mode: none.
682 + [ 10.478284] EXT4-fs (dm-13): re-mounted d97ee491-e00c-4dce-8cf7-7837f62ebc1c r/w. Quota mode: none.
683 + [ 10.530766] EXT4-fs (dm-12): re-mounted 22c3f7fd-df49-4c76-8d45-71ed07a760f9 r/w. Quota mode: none.
684 + [ 10.984049] remoteproc remoteproc0: powering up 4080000.remoteproc
685 + [ 10.994250] Bluetooth: hci0: QCA Downloading qca/msnv11.bin
686 + [ 11.113500] Bluetooth: hci0: QCA setup on UART is completed
687 + [ 11.161434] remoteproc remoteproc0: Booting fw image qcom/sm7325/nothing/spacewar/modem.mbn, size 88137836
688 + [ 11.163666] ipa 1e40000.ipa: received modem starting event
689 + [ 11.239557] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
690 + [ 11.239579] Bluetooth: BNEP filters: protocol multicast
691 + [ 11.239597] Bluetooth: BNEP socket layer initialized
692 + [ 11.672094] ipa 1e40000.ipa: received modem running event
693 + [ 11.672101] remoteproc remoteproc0: remote processor 4080000.remoteproc is now up
694 + [ 17.893933] sd 0:0:0:0: [sda] Starting disk
695 + [ 19.834850] Bluetooth: MGMT ver 1.23
696 + [ 19.835518] Bluetooth: hci0: setting up wcn6750
697 + [ 19.961202] Bluetooth: hci0: QCA Product ID :0x00000015
698 + [ 19.961226] Bluetooth: hci0: QCA SOC Version :0x40140110
699 + [ 19.961233] Bluetooth: hci0: QCA ROM Version :0x00000101
700 + [ 19.961240] Bluetooth: hci0: QCA Patch Version:0x000024c7
701 + [ 19.971556] Bluetooth: hci0: QCA controller version 0x01100101
702 + [ 19.971944] Bluetooth: hci0: unexpected event for opcode 0xfc48
703 + [ 19.972530] Bluetooth: hci0: QCA Downloading qca/msbtfw11.mbn
704 + [ 20.818254] Bluetooth: hci0: QCA Downloading qca/msnv11.bin
705 + [ 20.945370] Bluetooth: hci0: QCA setup on UART is completed
706 + [ 23.783369] amba 7040000.etm: deferred probe pending: (reason unknown)
707 + [ 23.783394] amba 7140000.etm: deferred probe pending: (reason unknown)
708 + [ 23.783404] amba 7240000.etm: deferred probe pending: (reason unknown)
709 + [ 23.783414] amba 7340000.etm: deferred probe pending: (reason unknown)
710 + [ 23.783423] amba 7440000.etm: deferred probe pending: (reason unknown)
711 + [ 23.783432] amba 7540000.etm: deferred probe pending: (reason unknown)
712 + [ 23.783442] amba 7640000.etm: deferred probe pending: (reason unknown)
713 + [ 23.783451] amba 7740000.etm: deferred probe pending: (reason unknown)
714 + [ 23.783496] qnoc-sc7280 1580000.interconnect: sync_state() pending due to aa00000.video-codec
715 + [ 23.783508] qnoc-sc7280 1740000.interconnect: sync_state() pending due to aa00000.video-codec
716 + [ 23.783518] qnoc-sc7280 1500000.interconnect: sync_state() pending due to aa00000.video-codec
717 + [ 23.783529] qnoc-sc7280 9100000.interconnect: sync_state() pending due to aa00000.video-codec
718 + [ 23.783563] qcom-rpmhpd 18200000.rsc:power-controller: sync_state() pending due to aa00000.video-codec
719 + [ 26.669563] sd 0:0:0:0: [sda] Starting disk
720 + [ 26.743847] wlan0: authenticate with 50:d2:f5:70:8d:d2 (local address=ba:5a:9a:92:cb:b3)
721 + [ 26.743875] wlan0: send auth to 50:d2:f5:70:8d:d2 (try 1/3)
722 + [ 26.808916] wlan0: authenticate with 50:d2:f5:70:8d:d2 (local address=ba:5a:9a:92:cb:b3)
723 + [ 26.808943] wlan0: send auth to 50:d2:f5:70:8d:d2 (try 1/3)
724 + [ 26.867795] wlan0: authenticated
725 + [ 26.874103] wlan0: associate with 50:d2:f5:70:8d:d2 (try 1/3)
726 + [ 26.877215] wlan0: RX AssocResp from 50:d2:f5:70:8d:d2 (capab=0x431 status=30 aid=1)
727 + [ 26.877271] wlan0: 50:d2:f5:70:8d:d2 rejected association temporarily; comeback duration 1000 TU (1024 ms)
728 + [ 27.902689] wlan0: associate with 50:d2:f5:70:8d:d2 (try 2/3)
729 + [ 28.023169] wlan0: RX AssocResp from 50:d2:f5:70:8d:d2 (capab=0x431 status=0 aid=1)
730 + [ 28.031969] wlan0: associated
731 + [ 28.483000] sd 0:0:0:4: [sde] Starting disk
732 + [ 28.496972] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54 sde55 sde56 sde57 sde58 sde59 sde60 sde61 sde62 sde63 sde64 sde65 sde66 sde67
733 + [ 28.539267] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54 sde55 sde56 sde57 sde58 sde59 sde60 sde61 sde62 sde63 sde64 sde65 sde66 sde67
734 + [ 28.587405] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54 sde55 sde56 sde57 sde58 sde59 sde60 sde61 sde62 sde63 sde64 sde65 sde66 sde67
735 + [ 29.128878] zram: Added device: zram0
736 + [ 30.919994] Bluetooth: RFCOMM TTY layer initialized
737 + [ 30.920024] Bluetooth: RFCOMM socket layer initialized
738 + [ 30.920040] Bluetooth: RFCOMM ver 1.11
739 + [ 31.828921] rfkill: input handler disabled
740 + [ 33.056588] sd 0:0:0:4: [sde] Starting disk
741 + [ 44.771196] sd 0:0:0:0: [sda] Starting disk
742 + [ 51.943181] sd 0:0:0:0: [sda] Starting disk
743 + [ 59.879767] sd 0:0:0:0: [sda] Starting disk
744 + [ 64.489246] sd 0:0:0:0: [sda] Starting disk
745 + [ 70.885040] sd 0:0:0:0: [sda] Starting disk
746 + [ 79.847590] sd 0:0:0:0: [sda] Starting disk
747 + [ 82.542808] sd 0:0:0:0: [sda] Starting disk
Newer Older