Like 0
Fork 0

Last active 1724193678

JIaxyga's Avatar JIaxyga revised this gist 1724193677. Go to revision

1 file changed, 855 insertions

gistfile1.txt(file created)

@@ -0,0 +1,855 @@
1 + [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
2 + [ 0.000000] Linux version 6.11.0-rc4-next-20240819 (pmos@fedora) (aarch64-alpine-linux-musl-gcc (Alpine 14.2.0) 14.2.0, GNU ld (GNU Binutils) 2.42) #206 SMP Tue Aug 20 19:40:18 UTC 2024
3 + [ 0.000000] KASLR enabled
4 + [ 0.000000] random: crng init done
5 + [ 0.000000] Machine model: Nothing Phone (1)
6 + [ 0.000000] efi: UEFI not found.
7 + [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
8 + [ 0.000000] OF: reserved mem: 0x00000000004cd000..0x00000000004cdfff (4 KiB) nomap non-reusable wlan-ce@4cd000
9 + [ 0.000000] OF: reserved mem: 0x0000000080000000..0x00000000805fffff (6144 KiB) nomap non-reusable hyp@80000000
10 + [ 0.000000] OF: reserved mem: 0x0000000080600000..0x00000000807fffff (2048 KiB) nomap non-reusable xbl@80600000
11 + [ 0.000000] OF: reserved mem: 0x0000000080800000..0x000000008085ffff (384 KiB) nomap non-reusable aop@80800000
12 + [ 0.000000] OF: reserved mem: 0x0000000080860000..0x000000008087ffff (128 KiB) nomap non-reusable aop-cmd-db@80860000
13 + [ 0.000000] OF: reserved mem: 0x0000000080884000..0x0000000080893fff (64 KiB) nomap non-reusable xbl-uefi-res@80880000
14 + [ 0.000000] OF: reserved mem: 0x00000000808ff000..0x00000000808fffff (4 KiB) nomap non-reusable sec-apps@808ff000
15 + [ 0.000000] OF: reserved mem: 0x0000000080900000..0x0000000080afffff (2048 KiB) nomap non-reusable smem@80900000
16 + [ 0.000000] OF: reserved mem: 0x0000000080b00000..0x0000000080bfffff (1024 KiB) nomap non-reusable cpucp@80b00000
17 + [ 0.000000] OF: reserved mem: 0x0000000080c00000..0x00000000817fffff (12288 KiB) nomap non-reusable wlan-fw@80c00000
18 + [ 0.000000] OF: reserved mem: 0x0000000086700000..0x0000000088efffff (40960 KiB) nomap non-reusable adsp@86700000
19 + [ 0.000000] OF: reserved mem: 0x000000008b200000..0x000000008b6fffff (5120 KiB) nomap non-reusable video@8b200000
20 + [ 0.000000] OF: reserved mem: 0x0000000088f00000..0x000000008acfffff (30720 KiB) nomap non-reusable cdsp@88f00000
21 + [ 0.000000] OF: reserved mem: 0x000000008b700000..0x000000008b70ffff (64 KiB) nomap non-reusable ipa-fw@8b700000
22 + [ 0.000000] OF: reserved mem: 0x000000008b71a000..0x000000008b71bfff (8 KiB) nomap non-reusable zap@8b71a000
23 + [ 0.000000] OF: reserved mem: 0x000000008b800000..0x000000009adfffff (251904 KiB) nomap non-reusable mpss@8b800000
24 + [ 0.000000] OF: reserved mem: 0x000000009ae00000..0x000000009c6fffff (25600 KiB) nomap non-reusable wpss@9ae00000
25 + [ 0.000000] OF: reserved mem: 0x0000000083a00000..0x0000000083dfffff (4096 KiB) map non-reusable ramoops@83a00000
26 + [ 0.000000] OF: reserved mem: 0x00000000c0000000..0x00000000c50fffff (82944 KiB) nomap non-reusable removed@c0000000
27 + [ 0.000000] OF: reserved mem: 0x00000000e1000000..0x00000000e19e33ff (10125 KiB) nomap non-reusable cont-splash@e1000000
28 + [ 0.000000] OF: reserved mem: 0x00000000f8500000..0x00000000f8afffff (6144 KiB) nomap non-reusable rmtfs@f8500000
29 + [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000037fffffff]
30 + [ 0.000000] NODE_DATA(0) allocated [mem 0x37e847740-0x37e849d7f]
31 + [ 0.000000] Zone ranges:
32 + [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
33 + [ 0.000000] DMA32 empty
34 + [ 0.000000] Normal [mem 0x0000000100000000-0x000000037fffffff]
35 + [ 0.000000] Movable zone start for each node
36 + [ 0.000000] Early memory node ranges
37 + [ 0.000000] node 0: [mem 0x0000000080000000-0x000000008087ffff]
38 + [ 0.000000] node 0: [mem 0x0000000080880000-0x0000000080883fff]
39 + [ 0.000000] node 0: [mem 0x0000000080884000-0x0000000080893fff]
40 + [ 0.000000] node 0: [mem 0x0000000080894000-0x00000000808fefff]
41 + [ 0.000000] node 0: [mem 0x00000000808ff000-0x00000000817fffff]
42 + [ 0.000000] node 0: [mem 0x0000000081800000-0x00000000866fffff]
43 + [ 0.000000] node 0: [mem 0x0000000086700000-0x000000008acfffff]
44 + [ 0.000000] node 0: [mem 0x000000008ad00000-0x000000008b1fffff]
45 + [ 0.000000] node 0: [mem 0x000000008b200000-0x000000008b70ffff]
46 + [ 0.000000] node 0: [mem 0x000000008b710000-0x000000008b719fff]
47 + [ 0.000000] node 0: [mem 0x000000008b71a000-0x000000008b71bfff]
48 + [ 0.000000] node 0: [mem 0x000000008b71c000-0x000000008b7fffff]
49 + [ 0.000000] node 0: [mem 0x000000008b800000-0x000000009c6fffff]
50 + [ 0.000000] node 0: [mem 0x000000009c700000-0x00000000b74fffff]
51 + [ 0.000000] node 0: [mem 0x00000000c0000000-0x00000000c50fffff]
52 + [ 0.000000] node 0: [mem 0x00000000c5100000-0x00000000e0ffffff]
53 + [ 0.000000] node 0: [mem 0x00000000e1000000-0x00000000e19e2fff]
54 + [ 0.000000] node 0: [mem 0x00000000e19e4000-0x00000000f84fffff]
55 + [ 0.000000] node 0: [mem 0x00000000f8500000-0x00000000f8afffff]
56 + [ 0.000000] node 0: [mem 0x00000000f8b00000-0x000000037fffffff]
57 + [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000037fffffff]
58 + [ 0.000000] On node 0, zone DMA: 2816 pages in unavailable ranges
59 + [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
60 + [ 0.000000] cma: Reserved 16 MiB at 0x00000000ff000000 on node -1
61 + [ 0.000000] psci: probing for conduit method from DT.
62 + [ 0.000000] psci: PSCIv1.1 detected in firmware.
63 + [ 0.000000] psci: Using standard PSCI v0.2 function IDs
64 + [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
65 + [ 0.000000] psci: SMC Calling Convention v1.0
66 + [ 0.000000] psci: OSI mode supported.
67 + [ 0.000000] percpu: Embedded 22 pages/cpu s51544 r8192 d30376 u90112
68 + [ 0.000000] pcpu-alloc: s51544 r8192 d30376 u90112 alloc=22*4096
69 + [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
70 + [ 0.000000] Detected VIPT I-cache on CPU0
71 + [ 0.000000] CPU features: detected: GIC system register CPU interface
72 + [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
73 + [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
74 + [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
75 + [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
76 + [ 0.000000] alternatives: applying boot alternatives
77 + [ 0.000000] Kernel command line: clk_ignore_unused pd_ignore_unused console=tty0 pmos_boot_uuid=54aa3d89-02a2-4e86-87a7-6a47aeb4eb8a pmos_root_uuid=08b10393-84dc-412c-8782-89c8c3d75659 pmos_rootfsopts=defaults androidboot.verifiedbootstate=orange androidboot.keymaster=1 androidboot.vbmeta.device=PARTUUID=d3104164-003a-5132-8d07-851d54e5af24 androidboot.vbmeta.avb_version=1.0 androidboot.vbmeta.device_state=unlocked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=7872 androidboot.vbmeta.digest=14396feaecb178d83dd43cd7e159605ae2c0c8408e2dcf81f81c942b8e624a0d androidboot.vbmeta.invalidate_on_error=yes androidboot.veritymode=enforcing androidboot.bootloader=00872-LAHAINA-2.487493.1 androidboot.expect.baseband=00781-LC_ALL_PACK-1 androidboot.fuse_state=1 androidboot.ddr_size=12288 androidboot.aging_build=false androidboot.hardware.sku=ROW androidboot.bootdevice=1d84000.ufshc androidboot.fstab_suffix=default androidboot.boot_devices=soc/1d84000.ufshc androidboot.serialno=185fdeee androidboot.baseband=msm msm_drm
78 + [ 0.000000] Unknown kernel command line parameters "pmos_boot_uuid=54aa3d89-02a2-4e86-87a7-6a47aeb4eb8a pmos_root_uuid=08b10393-84dc-412c-8782-89c8c3d75659 pmos_rootfsopts=defaults is_secure_fuse=1", will be passed to user space.
79 + [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
80 + [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
81 + [ 0.000000] Fallback order for Node 0: 0
82 + [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3110143
83 + [ 0.000000] Policy zone: Normal
84 + [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
85 + [ 0.000000] software IO TLB: area num 8.
86 + [ 0.000000] software IO TLB: mapped [mem 0x00000000fb000000-0x00000000ff000000] (64MB)
87 + [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
88 + [ 0.000000] rcu: Hierarchical RCU implementation.
89 + [ 0.000000] rcu: RCU event tracing is enabled.
90 + [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
91 + [ 0.000000] Tracing variant of Tasks RCU enabled.
92 + [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
93 + [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
94 + [ 0.000000] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
95 + [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
96 + [ 0.000000] GICv3: 988 SPIs implemented
97 + [ 0.000000] GICv3: 0 Extended SPIs implemented
98 + [ 0.000000] Root IRQ handler: gic_handle_irq
99 + [ 0.000000] GICv3: GICv3 features: 16 PPIs
100 + [ 0.000000] GICv3: GICD_CTRL.DS=1, SCR_EL3.FIQ=0
101 + [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
102 + [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
103 + [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
104 + [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
105 + [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
106 + [ 0.000193] Console: colour dummy device 80x25
107 + [ 0.000203] printk: legacy console [tty0] enabled
108 + [ 0.000753] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
109 + [ 0.000770] pid_max: default: 32768 minimum: 301
110 + [ 0.000902] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
111 + [ 0.000940] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
112 + [ 0.002004] psi: inconsistent task state! task=2:kthreadd cpu=0 psi_flags=4 clear=0 set=4
113 + [ 0.002730] rcu: Hierarchical SRCU implementation.
114 + [ 0.002750] rcu: Max phase no-delay instances is 1000.
115 + [ 0.002895] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
116 + [ 0.002998] EFI services will not be available.
117 + [ 0.004048] smp: Bringing up secondary CPUs ...
118 + [ 0.020536] Detected VIPT I-cache on CPU1
119 + [ 0.020593] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
120 + [ 0.020670] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
121 + [ 0.036666] Detected VIPT I-cache on CPU2
122 + [ 0.036715] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
123 + [ 0.036781] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
124 + [ 0.052607] Detected VIPT I-cache on CPU3
125 + [ 0.052654] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
126 + [ 0.052717] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
127 + [ 0.069858] CPU features: detected: Spectre-v4
128 + [ 0.069872] CPU features: detected: Spectre-BHB
129 + [ 0.069880] CPU features: detected: SSBS not fully self-synchronizing
130 + [ 0.069958] Detected PIPT I-cache on CPU4
131 + [ 0.070069] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
132 + [ 0.070194] CPU4: Booted secondary processor 0x0000000400 [0x411fd411]
133 + [ 0.088958] Detected PIPT I-cache on CPU5
134 + [ 0.089103] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
135 + [ 0.089236] CPU5: Booted secondary processor 0x0000000500 [0x411fd411]
136 + [ 0.109047] Detected PIPT I-cache on CPU6
137 + [ 0.109172] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
138 + [ 0.109298] CPU6: Booted secondary processor 0x0000000600 [0x411fd411]
139 + [ 0.126019] Detected PIPT I-cache on CPU7
140 + [ 0.126079] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
141 + [ 0.126140] CPU7: Booted secondary processor 0x0000000700 [0x411fd411]
142 + [ 0.126225] smp: Brought up 1 node, 8 CPUs
143 + [ 0.126329] SMP: Total of 8 processors activated.
144 + [ 0.126336] CPU: All CPU(s) started at EL1
145 + [ 0.126342] CPU features: detected: 32-bit EL0 Support
146 + [ 0.126349] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
147 + [ 0.126358] CPU features: detected: Common not Private translations
148 + [ 0.126365] CPU features: detected: CRC32 instructions
149 + [ 0.126375] CPU features: detected: RCpc load-acquire (LDAPR)
150 + [ 0.126381] CPU features: detected: LSE atomic instructions
151 + [ 0.126388] CPU features: detected: Privileged Access Never
152 + [ 0.126394] CPU features: detected: RAS Extension Support
153 + [ 0.126403] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
154 + [ 0.126484] alternatives: applying system-wide alternatives
155 + [ 0.129961] CPU features: detected: Hardware dirty bit management on CPU4-7
156 + [ 0.130261] Memory: 11599216K/12440572K available (11392K kernel code, 1484K rwdata, 4992K rodata, 2944K init, 477K bss, 820640K reserved, 16384K cma-reserved)
157 + [ 0.133047] devtmpfs: initialized
158 + [ 0.146617] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
159 + [ 0.146641] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
160 + [ 0.146942] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
161 + [ 0.146952] 0 pages in range for non-PLT usage
162 + [ 0.146955] 518912 pages in range for PLT usage
163 + [ 0.147012] pinctrl core: initialized pinctrl subsystem
164 + [ 0.147375] DMI not present or invalid.
165 + [ 0.147939] NET: Registered PF_NETLINK/PF_ROUTE protocol family
166 + [ 0.148673] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
167 + [ 0.148917] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
168 + [ 0.149134] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
169 + [ 0.149401] thermal_sys: Registered thermal governor 'step_wise'
170 + [ 0.149406] thermal_sys: Registered thermal governor 'power_allocator'
171 + [ 0.149478] cpuidle: using governor menu
172 + [ 0.149560] NET: Registered PF_QIPCRTR protocol family
173 + [ 0.149759] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
174 + [ 0.149935] ASID allocator initialised with 32768 entries
175 + [ 0.150074] Serial: AMBA PL011 UART driver
176 + [ 0.152828] CPUidle PSCI: Initialized CPU PM domain topology using OSI mode
177 + [ 0.167426] platform 1d84000.ufs: Fixed dependency cycle(s) with /soc@0/phy@1d87000
178 + [ 0.167522] platform 1d84000.ufs: Fixed dependency cycle(s) with /soc@0/phy@1d87000
179 + [ 0.167582] platform 1d87000.phy: Fixed dependency cycle(s) with /soc@0/ufs@1d84000
180 + [ 0.170013] amba 6002000.stm: Fixed dependency cycle(s) with /soc@0/funnel@6041000
181 + [ 0.170110] amba 6002000.stm: Fixed dependency cycle(s) with /soc@0/funnel@6041000
182 + [ 0.170163] amba 6041000.funnel: Fixed dependency cycle(s) with /soc@0/stm@6002000
183 + [ 0.170219] amba 6041000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6045000
184 + [ 0.170294] amba 6042000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@7810000
185 + [ 0.170318] amba 6042000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6045000
186 + [ 0.170386] amba 6042000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6045000
187 + [ 0.170449] amba 6041000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6045000
188 + [ 0.170503] amba 6045000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6042000
189 + [ 0.170545] amba 6045000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6041000
190 + [ 0.170594] amba 6045000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6b04000
191 + [ 0.170674] amba 6046000.replicator: Fixed dependency cycle(s) with /soc@0/replicator@6b06000
192 + [ 0.170692] amba 6046000.replicator: Fixed dependency cycle(s) with /soc@0/etr@6048000
193 + [ 0.170754] amba 6046000.replicator: Fixed dependency cycle(s) with /soc@0/etr@6048000
194 + [ 0.170814] amba 6048000.etr: Fixed dependency cycle(s) with /soc@0/replicator@6046000
195 + [ 0.170912] amba 6045000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6b04000
196 + [ 0.170967] amba 6b04000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6045000
197 + [ 0.171015] amba 6b04000.funnel: Fixed dependency cycle(s) with /soc@0/etf@6b05000
198 + [ 0.171081] amba 6b04000.funnel: Fixed dependency cycle(s) with /soc@0/etf@6b05000
199 + [ 0.171140] amba 6b05000.etf: Fixed dependency cycle(s) with /soc@0/funnel@6b04000
200 + [ 0.171183] amba 6b05000.etf: Fixed dependency cycle(s) with /soc@0/replicator@6b06000
201 + [ 0.171252] amba 6b05000.etf: Fixed dependency cycle(s) with /soc@0/replicator@6b06000
202 + [ 0.171309] amba 6046000.replicator: Fixed dependency cycle(s) with /soc@0/replicator@6b06000
203 + [ 0.171365] amba 6b06000.replicator: Fixed dependency cycle(s) with /soc@0/etf@6b05000
204 + [ 0.171411] amba 6b06000.replicator: Fixed dependency cycle(s) with /soc@0/replicator@6046000
205 + [ 0.171516] amba 7040000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
206 + [ 0.171593] amba 7140000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
207 + [ 0.171671] amba 7240000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
208 + [ 0.171746] amba 7340000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
209 + [ 0.171823] amba 7440000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
210 + [ 0.171898] amba 7540000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
211 + [ 0.171977] amba 7640000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
212 + [ 0.172052] amba 7740000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
213 + [ 0.172138] amba 7740000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
214 + [ 0.172201] amba 7640000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
215 + [ 0.172255] amba 7540000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
216 + [ 0.172315] amba 7440000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
217 + [ 0.172375] amba 7340000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
218 + [ 0.172433] amba 7240000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
219 + [ 0.172488] amba 7140000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
220 + [ 0.172542] amba 7040000.etm: Fixed dependency cycle(s) with /soc@0/funnel@7800000
221 + [ 0.172588] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/etm@7740000
222 + [ 0.172628] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/etm@7640000
223 + [ 0.172672] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/etm@7540000
224 + [ 0.172713] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/etm@7440000
225 + [ 0.172754] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/etm@7340000
226 + [ 0.172801] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/etm@7240000
227 + [ 0.172842] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/etm@7140000
228 + [ 0.172886] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/etm@7040000
229 + [ 0.172936] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@7810000
230 + [ 0.173019] amba 7800000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@7810000
231 + [ 0.173071] amba 6042000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@7810000
232 + [ 0.173120] amba 7810000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@7800000
233 + [ 0.173172] amba 7810000.funnel: Fixed dependency cycle(s) with /soc@0/funnel@6042000
234 + [ 0.175289] platform af00000.clock-controller: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/phy@ae94400
235 + [ 0.175576] platform ae00000.display-subsystem: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000
236 + [ 0.183734] platform 18200000.rsc:regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps1
237 + [ 0.183758] platform 18200000.rsc:regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps8
238 + [ 0.183781] platform 18200000.rsc:regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps7
239 + [ 0.183890] platform 18200000.rsc:regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps7
240 + [ 0.183912] platform 18200000.rsc:regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-1/bob
241 + [ 0.183933] platform 18200000.rsc:regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps1
242 + [ 0.186482] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
243 + [ 0.186496] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
244 + [ 0.186504] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
245 + [ 0.186510] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
246 + [ 0.186516] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
247 + [ 0.186521] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
248 + [ 0.186527] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
249 + [ 0.186532] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
250 + [ 0.190641] iommu: Default domain type: Translated
251 + [ 0.190653] iommu: DMA domain TLB invalidation policy: strict mode
252 + [ 0.191204] SCSI subsystem initialized
253 + [ 0.191302] usbcore: registered new interface driver usbfs
254 + [ 0.191322] usbcore: registered new interface driver hub
255 + [ 0.191347] usbcore: registered new device driver usb
256 + [ 0.191419] mc: Linux media interface: v0.10
257 + [ 0.191442] videodev: Linux video capture interface: v2.00
258 + [ 0.191461] pps_core: LinuxPPS API ver. 1 registered
259 + [ 0.191468] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
260 + [ 0.191480] PTP clock support registered
261 + [ 0.191541] scmi_core: SCMI protocol bus registered
262 + [ 0.191623] qcom_scm: convention: smc arm 64
263 + [ 0.192226] Advanced Linux Sound Architecture Driver Initialized.
264 + [ 0.192825] clocksource: Switched to clocksource arch_sys_counter
265 + [ 0.192978] VFS: Disk quotas dquot_6.6.0
266 + [ 0.192999] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
267 + [ 0.197238] NET: Registered PF_INET protocol family
268 + [ 0.197499] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
269 + [ 0.206609] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
270 + [ 0.206663] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
271 + [ 0.206679] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
272 + [ 0.206967] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
273 + [ 0.208895] TCP: Hash tables configured (established 131072 bind 65536)
274 + [ 0.208961] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
275 + [ 0.209078] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
276 + [ 0.209211] NET: Registered PF_UNIX/PF_LOCAL protocol family
277 + [ 0.209389] Unpacking initramfs...
278 + [ 0.213777] Initialise system trusted keyrings
279 + [ 0.213899] workingset: timestamp_bits=42 max_order=22 bucket_order=0
280 + [ 0.245645] NET: Registered PF_ALG protocol family
281 + [ 0.245663] Key type asymmetric registered
282 + [ 0.245669] Asymmetric key parser 'x509' registered
283 + [ 0.245718] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
284 + [ 0.245828] io scheduler mq-deadline registered
285 + [ 0.245836] io scheduler kyber registered
286 + [ 0.264455] qcom-ice 1d88000.crypto: Found QC Inline Crypto Engine (ICE) v3.2.0
287 + [ 0.265099] vreg_s1b_1p856: Setting 1840000-2040000uV
288 + [ 0.265235] vreg_s1c_2p2: Setting 2190000-2210000uV
289 + [ 0.265503] vreg_s7b_0p952: Setting 535000-1120000uV
290 + [ 0.265631] vreg_s9c_0p676: Setting 1010000-1170000uV
291 + [ 0.265672] vreg_s8b_1p256: Setting 1200000-1500000uV
292 + [ 0.265792] vreg_l1c_1p8: Setting 1800000-1980000uV
293 + [ 0.265883] vreg_l1b_0p912: Setting 825000-925000uV
294 + [ 0.265963] vreg_l2c_1p8: Setting 1620000-1980000uV
295 + [ 0.266082] vreg_l2b_3p072: Setting 2700000-3544000uV
296 + [ 0.266187] vreg_l3c_3p0: Setting 2800000-3540000uV
297 + [ 0.266250] vreg_l3b_0p6: Setting 312000-910000uV
298 + [ 0.266494] vreg_l6b_1p2: Setting 1140000-1260000uV
299 + [ 0.266693] vreg_l7b_2p96: Setting 2400000-3544000uV
300 + [ 0.266739] vreg_l4c_1p8_3p0: Setting 1620000-3300000uV
301 + [ 0.266887] vreg_l8b_0p904: Setting 870000-970000uV
302 + [ 0.266898] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
303 + [ 0.267081] vreg_l9b_1p2: Setting 1200000-1304000uV
304 + [ 0.267084] vreg_l5c_1p8_3p0: Setting 1620000-3300000uV
305 + [ 0.267329] vreg_l11b_1p776: Setting 1504000-2000000uV
306 + [ 0.267338] vreg_l6c_2p96: Setting 1650000-3544000uV
307 + [ 0.267533] vreg_l7c_3p0: Setting 3000000-3544000uV
308 + [ 0.267609] vreg_l12b_0p8: Setting 751000-824000uV
309 + [ 0.267870] vreg_l13b_0p8: Setting 530000-824000uV
310 + [ 0.267878] vreg_l8c_1p8: Setting 1620000-2000000uV
311 + [ 0.267931] qcom-rpmh-regulator 18200000.rsc:regulators-1: ldo8: devm_regulator_register() failed, ret=-517
312 + [ 0.268155] msm_serial: driver initialized
313 + [ 0.268182] vreg_l14b_1p2: Setting 1080000-1304000uV
314 + [ 0.268566] vreg_l15b_0p88: Setting 765000-1020000uV
315 + [ 0.268859] vreg_l16b_1p2: Setting 1100000-1300000uV
316 + [ 0.269073] vreg_l17b_1p8: Setting 1700000-1900000uV
317 + [ 0.269166] arm-smmu 3da0000.iommu: probing hardware configuration...
318 + [ 0.269178] arm-smmu 3da0000.iommu: SMMUv2 with:
319 + [ 0.269205] arm-smmu 3da0000.iommu: stage 1 translation
320 + [ 0.269211] arm-smmu 3da0000.iommu: coherent table walk
321 + [ 0.269217] arm-smmu 3da0000.iommu: stream matching with 6 register groups
322 + [ 0.269237] arm-smmu 3da0000.iommu: 7 context banks (0 stage-2 only)
323 + [ 0.269257] arm-smmu 3da0000.iommu: Supported page sizes: 0x61311000
324 + [ 0.269257] vreg_l18b_1p8: Setting 1800000-2000000uV
325 + [ 0.269264] arm-smmu 3da0000.iommu: Stage-1: 48-bit VA -> 36-bit IPA
326 + [ 0.269426] arm-smmu 3da0000.iommu: preserved 0 boot mappings
327 + [ 0.269454] vreg_l19b_1p8: Setting 1800000-2000000uV
328 + [ 0.271224] arm-smmu 15000000.iommu: probing hardware configuration...
329 + [ 0.271234] arm-smmu 15000000.iommu: SMMUv2 with:
330 + [ 0.271247] arm-smmu 15000000.iommu: stage 1 translation
331 + [ 0.271252] arm-smmu 15000000.iommu: coherent table walk
332 + [ 0.271258] arm-smmu 15000000.iommu: stream matching with 75 register groups
333 + [ 0.271270] arm-smmu 15000000.iommu: 61 context banks (0 stage-2 only)
334 + [ 0.271628] arm-smmu 15000000.iommu: Supported page sizes: 0x61311000
335 + [ 0.271634] arm-smmu 15000000.iommu: Stage-1: 36-bit VA -> 36-bit IPA
336 + [ 0.271727] arm-smmu 15000000.iommu: preserved 0 boot mappings
337 + [ 0.283972] loop: module loaded
338 + [ 0.284350] spmi_pmic_arb c440000.spmi: PMIC arbiter version v5 (0x50020000)
339 + [ 0.292378] tun: Universal TUN/TAP device driver, 1.6
340 + [ 0.293053] usbcore: registered new interface driver usb-storage
341 + [ 0.301566] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6100: registered as rtc0
342 + [ 0.301616] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6100: setting system clock to 1970-01-01T01:19:35 UTC (4775)
343 + [ 0.301659] i2c_dev: i2c /dev entries driver
344 + [ 0.302642] input: pmic_pwrkey as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@1300/c440000.spmi:pmic@0:pon@1300:pwrkey/input/input0
345 + [ 0.303252] input: pmic_resin as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@1300/c440000.spmi:pmic@0:pon@1300:resin/input/input1
346 + [ 0.312325] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
347 + [ 0.313435] sdhci: Secure Digital Host Controller Interface driver
348 + [ 0.313448] sdhci: Copyright(c) Pierre Ossman
349 + [ 0.313455] sdhci-pltfm: SDHCI platform and OF driver helper
350 + [ 0.315101] usbcore: registered new interface driver usbhid
351 + [ 0.315116] usbhid: USB HID core driver
352 + [ 0.316884] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available
353 + [ 0.326050] NET: Registered PF_PACKET protocol family
354 + [ 0.326078] Key type dns_resolver registered
355 + [ 0.329877] Loading compiled-in X.509 certificates
356 + [ 0.333507] Demotion targets for Node 0: null
357 + [ 0.354194] cpu cpu0: EM: created perf domain
358 + [ 0.361623] cpu cpu4: EM: created perf domain
359 + [ 0.368434] cpu cpu7: EM: created perf domain
360 + [ 0.373971] gpi 900000.dma-controller: Adding to iommu group 0
361 + [ 0.374821] gpi a00000.dma-controller: Adding to iommu group 1
362 + [ 0.375638] bam-dma-engine 1dc4000.dma-controller: Adding to iommu group 2
363 + [ 0.376704] geni_se_qup 9c0000.geniqup: Adding to iommu group 3
364 + [ 0.376955] Freeing initrd memory: 6716K
365 + [ 0.379680] i2c 1-0042: Fixed dependency cycle(s) with /pmic-glink/connector@0
366 + [ 0.381651] tfa987x 2-0034: Chip revision: 0x0b73
367 + [ 0.391348] tfa987x 2-0035: Chip revision: 0x0b73
368 + [ 0.402729] 994000.serial: ttyMSM0 at MMIO 0x994000 (irq = 148, base_baud = 0) is a MSM
369 + [ 0.404696] 99c000.serial: ttyHS1 at MMIO 0x99c000 (irq = 149, base_baud = 0) is a MSM
370 + [ 0.405118] serial serial0: tty port ttyHS1 registered
371 + [ 0.406392] geni_se_qup ac0000.geniqup: Adding to iommu group 4
372 + [ 0.418025] vreg_s1c_2p2: Setting 2190000-2210000uV
373 + [ 0.418125] msm-mdss ae00000.display-subsystem: Adding to iommu group 5
374 + [ 0.418203] vreg_s9c_0p676: Setting 1010000-1170000uV
375 + [ 0.418361] vreg_l1c_1p8: Setting 1800000-1980000uV
376 + [ 0.418435] platform ae01000.display-controller: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
377 + [ 0.418511] vreg_l2c_1p8: Setting 1620000-1980000uV
378 + [ 0.418726] vreg_l3c_3p0: Setting 2800000-3540000uV
379 + [ 0.418941] vreg_l4c_1p8_3p0: Setting 1620000-3300000uV
380 + [ 0.418981] platform ae01000.display-controller: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
381 + [ 0.419065] platform ae94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0
382 + [ 0.419086] platform ae94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/display-controller@ae01000
383 + [ 0.419105] vreg_l5c_1p8_3p0: Setting 1620000-3300000uV
384 + [ 0.419255] vreg_l6c_2p96: Setting 1650000-3544000uV
385 + [ 0.419391] vreg_l7c_3p0: Setting 3000000-3544000uV
386 + [ 0.419534] vreg_l8c_1p8: Setting 1620000-2000000uV
387 + [ 0.420874] vreg_l9c_2p96: Setting 2700000-3544000uV
388 + [ 0.421379] vreg_l10c_0p88: Setting 720000-1050000uV
389 + [ 0.421586] vreg_l11c_2p8: Setting 2800000-3544000uV
390 + [ 0.421759] vreg_l12c_1p8: Setting 1650000-2000000uV
391 + [ 0.421947] vreg_l13c_3p0: Setting 2700000-3544000uV
392 + [ 0.422187] vreg_bob: Setting 3008000-3960000uV
393 + [ 0.425874] qcom_pmic_glink pmic-glink: Failed to create device link (0x180) with a600000.usb
394 + [ 0.426348] i2c-qcom-cci ac4a000.cci: Found 19200000 cci clk rate while 37500000 was expected
395 + [ 0.427434] i2c-qcom-cci ac4b000.cci: Found 19200000 cci clk rate while 37500000 was expected
396 + [ 0.443593] ufshcd-qcom 1d84000.ufs: Adding to iommu group 6
397 + [ 0.444407] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
398 + [ 0.444470] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
399 + [ 0.470982] qcrypto 1dfa000.crypto: Adding to iommu group 2
400 + [ 0.472209] wcd probe start
401 + [ 0.473736] wcd finish
402 + [ 0.481367] adreno 3d00000.gpu: Adding to iommu group 7
403 + [ 0.483331] dwc3 a600000.usb: Adding to iommu group 8
404 + [ 0.484236] qcom_pmic_glink pmic-glink: Failed to create device link (0x180) with a600000.usb
405 + [ 0.485390] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
406 + [ 0.485463] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
407 + [ 0.487575] scsi host0: ufshcd
408 + [ 0.499119] msm_dsi ae94000.dsi: supply refgen not found, using dummy regulator
409 + [ 0.499552] msm_dsi ae94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0
410 + [ 0.499628] mipi-dsi ae94000.dsi.0: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
411 + [ 0.500118] msm_dpu ae01000.display-controller: bound ae94000.dsi (ops dsi_ops)
412 + [ 0.500850] adreno 3d00000.gpu: supply vdd not found, using dummy regulator
413 + [ 0.500922] adreno 3d00000.gpu: supply vddcx not found, using dummy regulator
414 + [ 0.507242] platform 3d6a000.gmu: Adding to iommu group 9
415 + [ 0.519004] msm_dpu ae01000.display-controller: bound 3d00000.gpu (ops a3xx_ops)
416 + [ 0.520632] [drm:dpu_kms_hw_init:1108] dpu hardware revision:0x70020000
417 + [ 0.523168] [drm] Initialized msm 1.12.0 for ae01000.display-controller on minor 0
418 + [ 0.523338] msm_dpu ae01000.display-controller: Direct firmware load for qcom/a660_sqe.fw failed with error -2
419 + [ 0.523352] msm_dpu ae01000.display-controller: [drm:adreno_request_fw] *ERROR* failed to load a660_sqe.fw
420 + [ 0.557693] scsi 0:0:0:49488: Well-known LUN SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
421 + [ 0.563896] scsi 0:0:0:49476: Well-known LUN SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
422 + [ 0.568499] scsi 0:0:0:49456: Well-known LUN SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
423 + [ 0.573731] scsi 0:0:0:0: Direct-Access SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
424 + [ 0.578627] sd 0:0:0:0: [sda] 60884992 4096-byte logical blocks: (249 GB/232 GiB)
425 + [ 0.578716] sd 0:0:0:0: [sda] Write Protect is off
426 + [ 0.578724] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
427 + [ 0.578902] scsi 0:0:0:1: Direct-Access SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
428 + [ 0.578938] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
429 + [ 0.579017] sd 0:0:0:0: [sda] Preferred minimum I/O size 524288 bytes
430 + [ 0.579025] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
431 + [ 0.581341] scsi 0:0:0:2: Direct-Access SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
432 + [ 0.581462] sd 0:0:0:1: [sdb] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
433 + [ 0.581868] sd 0:0:0:1: [sdb] Write Protect is off
434 + [ 0.581876] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
435 + [ 0.582513] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
436 + [ 0.582726] sd 0:0:0:1: [sdb] Preferred minimum I/O size 524288 bytes
437 + [ 0.582731] sd 0:0:0:1: [sdb] Optimal transfer size 524288 bytes
438 + [ 0.584234] scsi 0:0:0:3: Direct-Access SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
439 + [ 0.584281] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
440 + [ 0.584350] sd 0:0:0:2: [sdc] Write Protect is off
441 + [ 0.584355] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
442 + [ 0.584478] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
443 + [ 0.584543] sd 0:0:0:2: [sdc] Preferred minimum I/O size 524288 bytes
444 + [ 0.584548] sd 0:0:0:2: [sdc] Optimal transfer size 524288 bytes
445 + [ 0.586628] sd 0:0:0:3: [sdd] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB)
446 + [ 0.586656] scsi 0:0:0:4: Direct-Access SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
447 + [ 0.586695] sd 0:0:0:3: [sdd] Write Protect is off
448 + [ 0.586700] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
449 + [ 0.586826] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
450 + [ 0.586889] sd 0:0:0:3: [sdd] Preferred minimum I/O size 524288 bytes
451 + [ 0.586897] sd 0:0:0:3: [sdd] Optimal transfer size 524288 bytes
452 + [ 0.589194] sd 0:0:0:4: [sde] 1572864 4096-byte logical blocks: (6.44 GB/6.00 GiB)
453 + [ 0.589201] scsi 0:0:0:5: Direct-Access SAMSUNG KMJIA001RM-BC07 0201 PQ: 0 ANSI: 6
454 + [ 0.589282] sd 0:0:0:4: [sde] Write Protect is off
455 + [ 0.589287] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
456 + [ 0.589441] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
457 + [ 0.589549] sd 0:0:0:4: [sde] Preferred minimum I/O size 524288 bytes
458 + [ 0.589554] sd 0:0:0:4: [sde] Optimal transfer size 524288 bytes
459 + [ 0.591120] sd 0:0:0:5: [sdf] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB)
460 + [ 0.591215] sd 0:0:0:5: [sdf] Write Protect is off
461 + [ 0.591223] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
462 + [ 0.591395] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
463 + [ 0.591468] sd 0:0:0:5: [sdf] Preferred minimum I/O size 524288 bytes
464 + [ 0.591473] sd 0:0:0:5: [sdf] Optimal transfer size 524288 bytes
465 + [ 0.595206] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11
466 + [ 0.596125] sd 0:0:0:0: [sda] Attached SCSI disk
467 + [ 0.606239] sdc: sdc1 sdc2
468 + [ 0.606287] sdb: sdb1 sdb2
469 + [ 0.606664] sd 0:0:0:2: [sdc] Attached SCSI disk
470 + [ 0.606718] sd 0:0:0:1: [sdb] Attached SCSI disk
471 + [ 0.606926] sdd: sdd1 sdd2 sdd3
472 + [ 0.607500] sd 0:0:0:3: [sdd] Attached SCSI disk
473 + [ 0.614659] sdf: sdf1 sdf2 sdf3 sdf4 sdf5
474 + [ 0.616970] sd 0:0:0:5: [sdf] Attached SCSI disk
475 + [ 0.619769] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54 sde55 sde56 sde57 sde58 sde59 sde60 sde61 sde62 sde63 sde64 sde65 sde66 sde67
476 + [ 0.634726] sd 0:0:0:4: [sde] Attached SCSI disk
477 + [ 0.754872] fb0: Framebuffer is not in virtual address space.
478 + [ 0.786711] Console: switching to colour frame buffer device 135x150
479 + [ 0.800134] msm_dpu ae01000.display-controller: [drm] fb0: msmdrmfb frame buffer device
480 + [ 0.815889] input: gpio-keys as /devices/platform/gpio-keys/input/input2
481 + [ 0.821343] clk: Not disabling unused clocks
482 + [ 0.821356] PM: genpd: Not disabling unused power domains
483 + [ 0.821370] ALSA device list:
484 + [ 0.821376] No soundcards found.
485 + [ 0.821808] Freeing unused kernel memory: 2944K
486 + [ 0.821854] Run /init as init process
487 + [ 0.821862] with arguments:
488 + [ 0.821867] /init
489 + [ 0.821871] with environment:
490 + [ 0.821876] HOME=/
491 + [ 0.821881] TERM=linux
492 + [ 0.821885] pmos_boot_uuid=54aa3d89-02a2-4e86-87a7-6a47aeb4eb8a
493 + [ 0.821894] pmos_root_uuid=08b10393-84dc-412c-8782-89c8c3d75659
494 + [ 0.821903] pmos_rootfsopts=defaults
495 + [ 0.821909] is_secure_fuse=1
496 + [ 0.841067] syslogd started: BusyBox v1.36.1
497 + [ 0.842448] [pmOS-rd]: Configuring kernel firmware image search path
498 + [ 0.845201] udevd[196]: starting version 3.2.14
499 + [ 0.851313] udevd[197]: starting eudev-3.2.14
500 + [ 0.865924] synth uevent: /devices/platform/pmic-glink/pmic_glink.power-supply.0/power_supply/qcom-battmgr-bat: failed to send uevent
501 + [ 0.865962] power_supply qcom-battmgr-bat: uevent: failed to send synthetic uevent: -11
502 + [ 0.865998] synth uevent: /devices/platform/pmic-glink/pmic_glink.power-supply.0/power_supply/qcom-battmgr-usb: failed to send uevent
503 + [ 0.866015] power_supply qcom-battmgr-usb: uevent: failed to send synthetic uevent: -11
504 + [ 0.866047] synth uevent: /devices/platform/pmic-glink/pmic_glink.power-supply.0/power_supply/qcom-battmgr-wls: failed to send uevent
505 + [ 0.866063] power_supply qcom-battmgr-wls: uevent: failed to send synthetic uevent: -11
506 + [ 0.881219] udevd[199]: ctx=0xffffbab57d80 path=/lib/modules/6.11.0-rc4-next-20240819/kernel/drivers/net/wireless/ath/ath11k/ath11k.ko error=No such file or directory
507 + [ 0.910388] udevd[206]: ctx=0xffffbab57d80 path=/lib/modules/6.11.0-rc4-next-20240819/kernel/drivers/remoteproc/qcom_common.ko error=No such file or directory
508 + [ 0.912655] udevd[199]: ctx=0xffffbab57d80 path=/lib/modules/6.11.0-rc4-next-20240819/kernel/drivers/remoteproc/qcom_pil_info.ko error=No such file or directory
509 + [ 0.915709] udevd[220]: ctx=0xffffbab57d80 path=/lib/modules/6.11.0-rc4-next-20240819/kernel/drivers/remoteproc/qcom_pil_info.ko error=No such file or directory
510 + [ 0.917716] udevd[199]: ctx=0xffffbab57d80 path=/lib/modules/6.11.0-rc4-next-20240819/kernel/drivers/remoteproc/qcom_pil_info.ko error=No such file or directory
511 + [ 0.926606] udevd[204]: ctx=0xffffbab57d80 path=/lib/modules/6.11.0-rc4-next-20240819/kernel/drivers/media/v4l2-core/v4l2-mem2mem.ko error=No such file or directory
512 + [ 0.926721] udevd[206]: ctx=0xffffbab57d80 path=/lib/modules/6.11.0-rc4-next-20240819/kernel/drivers/remoteproc/qcom_pil_info.ko error=No such file or directory
513 + [ 0.930417] udevd[212]: ctx=0xffffbab57d80 path=/lib/modules/6.11.0-rc4-next-20240819/kernel/drivers/bluetooth/btqca.ko error=No such file or directory
514 + [ 0.951569] qcom_pmic_glink pmic-glink: Failed to create device link (0x180) with 1-0042
515 + [ 0.991668] [FTS_TS/I]fts_ts_probe:Touch Screen(SPI BUS) driver prboe...
516 + [ 0.991700] [FTS_TS/I]fts_ts_probe_entry:Focaltech V3.4 20211214
517 + [ 0.991710] [FTS_TS/I]fts_get_dt_coords:display x(0 1080) y(0 2400)
518 + [ 0.991733] [FTS_TS/I]fts_parse_dt:max touch number:10, irq gpio:624, reset gpio:648
519 + [ 1.007479] input: fts_ts as /devices/platform/soc@0/ac0000.geniqup/a94000.spi/spi_master/spi13/spi13.0/input/input3
520 + [ 1.039716] udevd[234]: failed to execute '/usr/libexec/elogind/elogind-uaccess-command' '/usr/libexec/elogind/elogind-uaccess-command /dev/dri/card0 ': No such file or directory
521 + [ 1.042316] udevd[235]: failed to execute '/usr/libexec/fbd-ledctrl' '/usr/libexec/fbd-ledctrl -p /sys/devices/platform/soc@0/c440000.spmi/spmi-0/0-02/c440000.spmi:pmic@2:led-controller@ee00/leds/white:flash -t pattern -G feedbackd': No such file or directory
522 + [ 1.056670] udevd[237]: failed to execute '/usr/libexec/elogind/elogind-uaccess-command' '/usr/libexec/elogind/elogind-uaccess-command /dev/snd/timer ': No such file or directory
523 + [ 1.274407] [FTS_TS/I]fts_get_chip_types:verify id:0x5662
524 + [ 1.280383] fb0: Framebuffer is not in virtual address space.
525 + [ 1.280456] [FTS_TS/I]fts_get_ic_information:get ic information, chip id = 0x5662(cid type=0x0)
526 + [ 1.292318] [FTS_TS/I]fts_create_apk_debug_channel:Create proc entry success!
527 + [ 1.298306] [FTS_TS/I]fts_create_sysfs:[EX]: sysfs_create_group() succeeded!!
528 + [ 1.304269] [FTS_TS/I]fts_irq_registration:irq:169, flag:2002
529 + [ 1.311705] [FTS_TS/I]fts_fwupg_init:fw upgrade init function
530 + [ 1.317086] [FTS_TS/I]fts_fwupg_init:match upgrade setting,type(ID):0x5662
531 + [ 1.322556] [FTS_TS/I]fts_fwupg_work:fw upgrade work function
532 + [ 1.322567] [FTS_TS/I]fts_ts_probe:Touch Screen(SPI BUS) driver prboe successfully
533 + [ 1.327951] [FTS_TS/I]fts_fwupg_get_fw_file:upgrade fw file len:119284
534 + [ 1.338756] [FTS_TS/I]fts_fw_download:fw upgrade download function
535 + [ 1.344117] [FTS_TS/I]fts_fw_download:fw download times:1
536 + [ 1.349483] [FTS_TS/I]fts_fw_write_start:begin to write and start fw(bin len:119284)
537 + [ 1.354848] [FTS_TS/I]fts_enter_into_boot:enter into boot environment
538 + [ 1.389688] [FTS_TS/I]fts_check_bootid:read boot id:0x56 0x62
539 + [ 1.395924] [FTS_TS/I]fts_enter_into_boot:boot id check pass, retry=0
540 + [ 1.401324] [FTS_TS/I]fts_pram_write_ecc:begin to write pram app(bin len:119284)
541 + [ 1.406650] [FTS_TS/I]fts_pram_write_ecc:pram app length in fact:119284
542 + [ 1.411943] [FTS_TS/I]fts_dpram_write:dpram write
543 + [ 1.417346] [FTS_TS/I]fts_dpram_write:write data, num:4 remainder:21028
544 + [ 1.422105] [pmOS-rd]: Setting framebuffer mode to: U:1080x2400p-0
545 + [ 1.503898] [pmOS-rd]: Waiting for super partition /dev/sda6...
546 + [ 1.514184] [pmOS-rd]: Waiting for super partition /dev/sda6...
547 + [ 1.518203] [pmOS-rd]: device-mapper: create ioctl on odm_a failed: Resource busy
548 + [ 1.518737] [pmOS-rd]: device-mapper: create ioctl on product_a failed: Resource busy
549 + [ 1.519141] [pmOS-rd]: device-mapper: create ioctl on system_a failed: Resource busy
550 + [ 1.519512] [pmOS-rd]: device-mapper: create ioctl on system_ext_a failed: Resource busy
551 + [ 1.519571] [pmOS-rd]: device-mapper: create ioctl on vendor_a failed: Resource busy
552 + [ 1.520988] [pmOS-rd]: ls: /hooks: No such file or directory
553 + [ 1.521837] [pmOS-rd]: Setup usb network
554 + [ 1.521849] [pmOS-rd]: /sys/class/android_usb does not exist, skipping android_usb
555 + [ 1.521857] [pmOS-rd]: Setting up an USB gadget through configfs
556 + [ 1.528628] configfs-gadget.g1 gadget.0: HOST MAC fe:6a:8d:f5:91:1f
557 + [ 1.528639] configfs-gadget.g1 gadget.0: MAC 4e:6e:56:1d:d2:22
558 + [ 1.541817] [pmOS-rd]: Starting unudhcpd with server ip 172.16.42.1, client ip: 172.16.42.2
559 + [ 1.545121] [pmOS-rd]: Using interface usb0
560 + [ 1.545144] [pmOS-rd]: Starting the DHCP daemon
561 + [ 1.545899] [pmOS-rd]: Trying to start server with parameters: Server IP addr: 172.16.42.1:67, client IP addr: 172.16.42.2, interface: usb0
562 + [ 1.586246] [FTS_TS/I]fts_ecc_check:ecc check
563 + [ 1.590343] [FTS_TS/I]fts_ecc_cal_tp:ecc calc in tp
564 + [ 1.597937] [FTS_TS/I]fts_pram_write_ecc:pram app write successfully
565 + [ 1.597943] [FTS_TS/I]fts_pram_start:remap to start pram
566 + [ 1.616853] [FTS_TS/I]fts_fw_write_start:fw download successfully
567 + [ 1.617406] [FTS_TS/I]fts_read_parse_touchdata:touch buff is 0xff, need recovery state
568 + [ 1.617689] [FTS_TS/I]fts_wait_tp_to_valid:TP Ready,Device ID:0x56
569 + [ 1.681875] [FTS_TS/I]fts_fwupg_work:read chip id:0x56
570 + [ 2.552333] [pmOS-rd]: Trying to mount subpartitions for 10 seconds...
571 + [ 5.607571] [pmOS-rd]: Mount subpartitions of /dev/sda11
572 + [ 7.774112] [pmOS-rd]: /dev/mapper/sda11p1
573 + [ 7.776476] [pmOS-rd]: Mount boot partition (/dev/mapper/sda11p1) to /boot (read-only)
574 + [ 7.779284] [pmOS-rd]: Detected ext filesystem
575 + [ 7.782754] EXT4-fs (dm-12): mounting ext2 file system using the ext4 subsystem
576 + [ 7.784195] EXT4-fs (dm-12): mounted filesystem 54aa3d89-02a2-4e86-87a7-6a47aeb4eb8a ro without journal. Quota mode: none.
577 + [ 7.785683] [pmOS-rd]: Extract /boot/initramfs-extra
578 + [ 7.857734] [pmOS-rd]: 8645 blocks
579 + [ 7.858887] [pmOS-rd]: ls: /hooks-extra: No such file or directory
580 + [ 8.555764] [pmOS-rd]: /dev/mapper/sda11p2
581 + [ 9.348197] [pmOS-rd]: Not resizing root partition (/dev/mapper/sda11p2): no free space left
582 + [ 9.354038] [pmOS-rd]: Auto-repair and check 'ext' filesystem (/dev/mapper/sda11p2)
583 + [ 9.361471] [pmOS-rd]: pmOS_root: clean, 27321/3079424 files, 694071/17121351 blocks
584 + [ 9.441343] [pmOS-rd]: Mount root partition (/dev/mapper/sda11p2) to /sysroot (read-write) with options defaults
585 + [ 9.461090] [pmOS-rd]: Detected ext4 filesystem
586 + [ 9.481737] EXT4-fs (dm-13): mounted filesystem 08b10393-84dc-412c-8782-89c8c3d75659 r/w with ordered data mode. Quota mode: none.
587 + [ 9.485039] EXT4-fs (dm-12): unmounting filesystem 54aa3d89-02a2-4e86-87a7-6a47aeb4eb8a.
588 + [ 9.489729] [pmOS-rd]: Auto-repair and check 'ext' filesystem (/dev/mapper/sda11p1)
589 + [ 9.491516] [pmOS-rd]: pmOS_boot: clean, 286/60416 files, 17160/60416 blocks
590 + [ 9.601137] [pmOS-rd]: Mount boot partition (/dev/mapper/sda11p1) to /sysroot/boot (read-write)
591 + [ 9.616359] [pmOS-rd]: Detected ext filesystem
592 + [ 9.621412] EXT4-fs (dm-12): mounting ext2 file system using the ext4 subsystem
593 + [ 9.623159] EXT4-fs (dm-12): mounted filesystem 54aa3d89-02a2-4e86-87a7-6a47aeb4eb8a r/w without journal. Quota mode: none.
594 + [ 9.625893] [pmOS-rd]: Switching root
595 + [ 9.730468] syslogd exiting
596 + [ 11.032513] udevd[1076]: starting version 3.2.14
597 + [ 11.082811] udevd[1076]: starting eudev-3.2.14
598 + [ 11.103991] synth uevent: /devices/platform/pmic-glink/pmic_glink.power-supply.0/power_supply/qcom-battmgr-bat: failed to send uevent
599 + [ 11.103997] power_supply qcom-battmgr-bat: uevent: failed to send synthetic uevent: -11
600 + [ 11.104025] synth uevent: /devices/platform/pmic-glink/pmic_glink.power-supply.0/power_supply/qcom-battmgr-usb: failed to send uevent
601 + [ 11.104026] power_supply qcom-battmgr-usb: uevent: failed to send synthetic uevent: -11
602 + [ 11.104053] synth uevent: /devices/platform/pmic-glink/pmic_glink.power-supply.0/power_supply/qcom-battmgr-wls: failed to send uevent
603 + [ 11.104054] power_supply qcom-battmgr-wls: uevent: failed to send synthetic uevent: -11
604 + [ 11.157827] cfg80211: Loading compiled-in X.509 certificates for regulatory database
605 + [ 11.164030] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
606 + [ 11.164165] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
607 + [ 11.166398] ipa 1e40000.ipa: Adding to iommu group 10
608 + [ 11.172220] ipa 1e40000.ipa: limiting IPA memory size to 0x00003000
609 + [ 11.172536] ipa 1e40000.ipa: IPA driver initialized
610 + [ 11.173476] remoteproc remoteproc0: 4080000.remoteproc is available
611 + [ 11.187245] remoteproc remoteproc1: 3700000.remoteproc is available
612 + [ 11.192375] remoteproc remoteproc2: 8a00000.remoteproc is available
613 + [ 11.218836] remoteproc remoteproc2: powering up 8a00000.remoteproc
614 + [ 11.218854] remoteproc remoteproc2: Booting fw image qcom/sm7325/nothing/spacewar/wpss.mbn, size 7496496
615 + [ 11.220802] ipa 1e40000.ipa: IPA driver setup completed successfully
616 + [ 11.233340] remoteproc remoteproc3: a300000.remoteproc is available
617 + [ 11.235569] ath11k 17a10040.wifi: Adding to iommu group 11
618 + [ 11.236645] ath11k 17a10040.wifi: wcn6750 hw1.0
619 + [ 11.238088] Bluetooth: Core ver 2.22
620 + [ 11.238273] NET: Registered PF_BLUETOOTH protocol family
621 + [ 11.238276] Bluetooth: HCI device and connection manager initialized
622 + [ 11.238282] Bluetooth: HCI socket layer initialized
623 + [ 11.238284] Bluetooth: L2CAP socket layer initialized
624 + [ 11.238292] Bluetooth: SCO socket layer initialized
625 + [ 11.242608] qcom-venus aa00000.video-codec: Adding to iommu group 12
626 + [ 11.247597] remoteproc remoteproc3: powering up a300000.remoteproc
627 + [ 11.247612] remoteproc remoteproc3: Booting fw image qcom/sm7325/nothing/spacewar/cdsp.mbn, size 3465216
628 + [ 11.249310] qcom-venus aa00000.video-codec: non legacy binding
629 + [ 11.260581] Bluetooth: HCI UART driver ver 2.3
630 + [ 11.260587] Bluetooth: HCI UART protocol H4 registered
631 + [ 11.264767] Bluetooth: HCI UART protocol QCA registered
632 + [ 11.268560] qcom-venus aa00000.video-codec: fail to load video firmware
633 + [ 11.285602] remoteproc remoteproc1: powering up 3700000.remoteproc
634 + [ 11.285628] remoteproc remoteproc1: Booting fw image qcom/sm7325/nothing/spacewar/adsp.mbn, size 18913104
635 + [ 11.298248] qcom-venus aa00000.video-codec: probe with driver qcom-venus failed with error -22
636 + [ 11.317256] Bluetooth: hci0: setting up wcn6750
637 + [ 11.344458] remoteproc remoteproc3: remote processor a300000.remoteproc is now up
638 + [ 11.396133] Bluetooth: hci0: Frame reassembly failed (-84)
639 + [ 11.420600] qcom,fastrpc a300000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
640 + [ 11.421150] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@1: Adding to iommu group 13
641 + [ 11.421421] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@2: Adding to iommu group 14
642 + [ 11.421648] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 15
643 + [ 11.421832] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 16
644 + [ 11.422302] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 17
645 + [ 11.422524] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 18
646 + [ 11.422714] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 19
647 + [ 11.422866] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@8: Adding to iommu group 20
648 + [ 11.423023] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@11: Adding to iommu group 21
649 + [ 11.423204] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@12: Adding to iommu group 22
650 + [ 11.423365] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@13: Adding to iommu group 23
651 + [ 11.423569] qcom,fastrpc-cb a300000.remoteproc:glink-edge:fastrpc:compute-cb@14: Adding to iommu group 24
652 + [ 11.436915] remoteproc remoteproc2: remote processor 8a00000.remoteproc is now up
653 + [ 11.441572] Bluetooth: hci0: QCA Product ID :0x00000015
654 + [ 11.441583] Bluetooth: hci0: QCA SOC Version :0x40140110
655 + [ 11.441586] Bluetooth: hci0: QCA ROM Version :0x00000101
656 + [ 11.441588] Bluetooth: hci0: QCA Patch Version:0x000024c7
657 + [ 11.449055] Bluetooth: hci0: QCA controller version 0x01100101
658 + [ 11.449214] Bluetooth: hci0: unexpected event for opcode 0xfc48
659 + [ 11.449356] Bluetooth: hci0: QCA Downloading qca/msbtfw11.mbn
660 + [ 11.477152] remoteproc remoteproc1: remote processor 3700000.remoteproc is now up
661 + [ 11.482162] qcom,fastrpc 3700000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
662 + [ 11.483052] qcom,fastrpc-cb 3700000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 25
663 + [ 11.483769] qcom,fastrpc-cb 3700000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 26
664 + [ 11.484801] qcom,fastrpc-cb 3700000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 27
665 + [ 11.494524] PDR: Indication received from msm/adsp/audio_pd, state: 0x1fffffff, trans-id: 1
666 + [ 11.494553] qcom,apr 3700000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:3
667 + [ 11.494615] qcom,apr 3700000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:4
668 + [ 11.501910] qcom,apr 3700000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:7
669 + [ 11.503379] q6asm-dai 3700000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 28
670 + [ 11.503737] qcom,apr 3700000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:8
671 + [ 11.503896] PDR: Indication received from msm/adsp/charger_pd, state: 0x1fffffff, trans-id: 1
672 + [ 11.507173] rx macro start
673 + [ 11.507728] rx macro finish
674 + [ 11.507870] tx macro probe start
675 + [ 11.508182] tx macro probe finish
676 + [ 11.513471] swr probe start
677 + [ 11.515411] qcom-soundwire 3210000.soundwire: Qualcomm Soundwire controller v1.6.0 Registered
678 + [ 11.515426] swr probe finish
679 + [ 11.515592] swr probe start
680 + [ 11.516373] wcd938x_codec audio-codec: bound sdw:2:0:0217:010d:00:4 (ops wcd938x_sdw_component_ops)
681 + [ 11.516393] wcd938x_codec audio-codec: bound sdw:3:0:0217:010d:00:3 (ops wcd938x_sdw_component_ops)
682 + [ 11.518627] qcom-soundwire 3230000.soundwire: Qualcomm Soundwire controller v1.6.0 Registered
683 + [ 11.518642] swr probe finish
684 + [ 11.519888] tfa987x 2-0035: ASoC: sink widget PWUP overwritten
685 + [ 11.519903] tfa987x 2-0035: ASoC: sink widget Speaker overwritten
686 + [ 11.523450] wcd938x_codec audio-codec: DBG waiting for tx init...
687 + [ 11.536235] wcd938x_codec audio-codec: DBG got tx init...
688 + [ 11.593887] input: NP1 Headset Jack as /devices/platform/sound/sound/card0/input4
689 + [ 11.594394] wcd9380-codec sdw:2:0:0217:010d:00:4: Slave 2 state check1: UNATTACHED, status was 1
690 + [ 11.595139] wcd9380-codec sdw:3:0:0217:010d:00:3: Slave 1 state check1: UNATTACHED, status was 1
691 + [ 11.629695] ath11k 17a10040.wifi: chip_id 0x1 chip_family 0xb board_id 0xff soc_id 0xffffffff
692 + [ 11.629714] ath11k 17a10040.wifi: fw_version 0x10120330 fw_build_timestamp 2023-04-04 09:37 fw_build_id WLAN.MSL.1.0.1-00816-QCAMSLSWPLZ-1.517516.3.579317.3
693 + [ 11.762567] fuse: init (API version 7.40)
694 + [ 11.784293] NET: Registered PF_INET6 protocol family
695 + [ 11.784653] Segment Routing with IPv6
696 + [ 11.784659] In-situ OAM (IOAM) with IPv6
697 + [ 12.053302] EXT4-fs (dm-13): re-mounted 08b10393-84dc-412c-8782-89c8c3d75659 r/w. Quota mode: none.
698 + [ 12.093519] EXT4-fs (dm-12): re-mounted 54aa3d89-02a2-4e86-87a7-6a47aeb4eb8a r/w. Quota mode: none.
699 + [ 12.288850] Bluetooth: hci0: QCA Downloading qca/msnv11.bin
700 + [ 12.408052] Bluetooth: hci0: QCA setup on UART is completed
701 + [ 12.765239] remoteproc remoteproc0: powering up 4080000.remoteproc
702 + [ 12.940714] remoteproc remoteproc0: Booting fw image qcom/sm7325/nothing/spacewar/modem.mbn, size 88137836
703 + [ 12.943720] ipa 1e40000.ipa: received modem starting event
704 + [ 13.102919] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
705 + [ 13.102929] Bluetooth: BNEP filters: protocol multicast
706 + [ 13.102941] Bluetooth: BNEP socket layer initialized
707 + [ 13.166062] [drm:dpu_crtc_frame_event_cb] *ERROR* crtc64 event 1 overflow
708 + [ 13.174391] [drm:dpu_crtc_frame_event_cb] *ERROR* crtc64 event 1 overflow
709 + [ 13.182854] [drm:dpu_crtc_frame_event_cb] *ERROR* crtc64 event 1 overflow
710 + [ 13.191202] [drm:dpu_crtc_frame_event_cb] *ERROR* crtc64 event 1 overflow
711 + [ 13.199513] [drm:dpu_crtc_frame_event_cb] *ERROR* crtc64 event 1 overflow
712 + [ 13.207730] [drm:dpu_crtc_frame_event_cb] *ERROR* crtc64 event 1 overflow
713 + [ 13.216176] [drm:dpu_crtc_frame_event_cb] *ERROR* crtc64 event 1 overflow
714 + [ 13.224401] [drm:dpu_crtc_frame_event_cb] *ERROR* crtc64 event 1 overflow
715 + [ 13.232923] [drm:dpu_crtc_frame_event_cb] *ERROR* crtc64 event 1 overflow
716 + [ 13.241243] [drm:dpu_crtc_frame_event_cb] *ERROR* crtc64 event 1 overflow
717 + [ 13.408639] ipa 1e40000.ipa: received modem running event
718 + [ 13.408644] remoteproc remoteproc0: remote processor 4080000.remoteproc is now up
719 + [ 21.156046] Bluetooth: MGMT ver 1.23
720 + [ 21.157722] Bluetooth: hci0: setting up wcn6750
721 + [ 21.282539] Bluetooth: hci0: QCA Product ID :0x00000015
722 + [ 21.282555] Bluetooth: hci0: QCA SOC Version :0x40140110
723 + [ 21.282561] Bluetooth: hci0: QCA ROM Version :0x00000101
724 + [ 21.282568] Bluetooth: hci0: QCA Patch Version:0x000024c7
725 + [ 21.304001] Bluetooth: hci0: QCA controller version 0x01100101
726 + [ 21.304377] Bluetooth: hci0: unexpected event for opcode 0xfc48
727 + [ 21.304425] Bluetooth: hci0: QCA Downloading qca/msbtfw11.mbn
728 + [ 22.148868] Bluetooth: hci0: QCA Downloading qca/msnv11.bin
729 + [ 22.267937] Bluetooth: hci0: QCA setup on UART is completed
730 + [ 25.319497] amba 7040000.etm: deferred probe pending: (reason unknown)
731 + [ 25.319521] amba 7140000.etm: deferred probe pending: (reason unknown)
732 + [ 25.319531] amba 7240000.etm: deferred probe pending: (reason unknown)
733 + [ 25.319542] amba 7340000.etm: deferred probe pending: (reason unknown)
734 + [ 25.319552] amba 7440000.etm: deferred probe pending: (reason unknown)
735 + [ 25.319562] amba 7540000.etm: deferred probe pending: (reason unknown)
736 + [ 25.319571] amba 7640000.etm: deferred probe pending: (reason unknown)
737 + [ 25.319580] amba 7740000.etm: deferred probe pending: (reason unknown)
738 + [ 25.319631] qnoc-sc7280 1580000.interconnect: sync_state() pending due to aa00000.video-codec
739 + [ 25.319644] qnoc-sc7280 1740000.interconnect: sync_state() pending due to aa00000.video-codec
740 + [ 25.319657] qnoc-sc7280 1500000.interconnect: sync_state() pending due to aa00000.video-codec
741 + [ 25.319668] qnoc-sc7280 9100000.interconnect: sync_state() pending due to aa00000.video-codec
742 + [ 25.319706] qcom-rpmhpd 18200000.rsc:power-controller: sync_state() pending due to aa00000.video-codec
743 + [ 28.052131] wlan0: authenticate with 50:d2:f5:70:8d:d2 (local address=5e:a4:db:5f:22:d6)
744 + [ 28.052150] wlan0: send auth to 50:d2:f5:70:8d:d2 (try 1/3)
745 + [ 28.118723] wlan0: authenticate with 50:d2:f5:70:8d:d2 (local address=5e:a4:db:5f:22:d6)
746 + [ 28.118739] wlan0: send auth to 50:d2:f5:70:8d:d2 (try 1/3)
747 + [ 28.177022] wlan0: authenticated
748 + [ 28.181172] wlan0: associate with 50:d2:f5:70:8d:d2 (try 1/3)
749 + [ 28.184136] wlan0: RX AssocResp from 50:d2:f5:70:8d:d2 (capab=0x431 status=0 aid=2)
750 + [ 28.197506] wlan0: associated
751 + [ 30.207530] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54 sde55 sde56 sde57 sde58 sde59 sde60 sde61 sde62 sde63 sde64 sde65 sde66 sde67
752 + [ 30.259760] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54 sde55 sde56 sde57 sde58 sde59 sde60 sde61 sde62 sde63 sde64 sde65 sde66 sde67
753 + [ 30.946125] zram: Added device: zram0
754 + [ 31.145526] msm_dpu ae01000.display-controller: [drm:adreno_request_fw] loaded qcom/a660_sqe.fw from new location
755 + [ 31.146210] msm_dpu ae01000.display-controller: [drm:adreno_request_fw] loaded qcom/a660_gmu.bin from new location
756 + [ 32.826551] qcom-soundwire 3230000.soundwire: swrm_wait_for_frame_gen_enabled: link status not disconnected
757 + [ 32.826576] qcom-soundwire 3230000.soundwire: link failed to connect
758 + [ 32.843726] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
759 + [ 33.438840] soundwire sdw-master-2-0: clock stop deprepare wait failed:-110
760 + [ 33.456549] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
761 + [ 33.473628] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
762 + [ 33.490687] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
763 + [ 33.507729] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
764 + [ 33.553551] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
765 + [ 33.571391] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
766 + [ 33.589509] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
767 + [ 33.606418] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
768 + [ 33.624574] wcd9380-codec sdw:2:0:0217:010d:00:4: Slave 2 state check1: UNATTACHED, status was 1
769 + [ 33.626120] q6asm-dai 3700000.remoteproc:glink-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
770 + [ 33.626162] q6asm-dai 3700000.remoteproc:glink-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
771 + [ 33.626175] q6asm-dai 3700000.remoteproc:glink-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
772 + [ 33.626192] q6asm-dai 3700000.remoteproc:glink-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
773 + [ 36.681969] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
774 + [ 38.624922] q6asm-dai 3700000.remoteproc:glink-edge:apr:service@7:dais: CMD 10bcd timeout
775 + [ 38.755003] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
776 + [ 39.349739] soundwire sdw-master-2-0: clock stop deprepare wait failed:-110
777 + [ 39.367754] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
778 + [ 39.384833] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
779 + [ 39.401911] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
780 + [ 39.418978] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
781 + [ 39.560423] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
782 + [ 39.560451] wcd938x_codec audio-codec: ASoC: error at snd_soc_component_update_bits on audio-codec for register: [0x00003408] -61
783 + [ 39.577575] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
784 + [ 39.577592] wcd938x_codec audio-codec: ASoC: error at snd_soc_component_update_bits on audio-codec for register: [0x00003417] -61
785 + [ 39.594511] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
786 + [ 39.594553] wcd938x_codec audio-codec: ASoC: error at snd_soc_component_update_bits on audio-codec for register: [0x00003022] -61
787 + [ 39.618794] qcom-soundwire 3230000.soundwire: swrm_wait_for_wr_fifo_avail err write overflow
788 + [ 39.619198] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600100f
789 + [ 39.636239] qcom-soundwire 3230000.soundwire: swrm_wait_for_rd_fifo_avail err read underflow
790 + [ 39.636256] soundwire sdw-master-3-0: trf on Slave 1 failed:-5 read addr 44 count 1
791 + [ 39.653756] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
792 + [ 39.670806] qcom-soundwire 3230000.soundwire: swrm_wait_for_rd_fifo_avail err read underflow
793 + [ 39.670820] soundwire sdw-master-3-0: trf on Slave 1 failed:-5 read addr 3405 count 1
794 + [ 39.670838] wcd938x_codec audio-codec: ASoC: error at snd_soc_component_update_bits on audio-codec for register: [0x00003405] -5
795 + [ 39.688294] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
796 + [ 39.705652] qcom-soundwire 3230000.soundwire: swrm_wait_for_rd_fifo_avail err read underflow
797 + [ 39.705667] soundwire sdw-master-3-0: trf on Slave 1 failed:-5 read addr 3405 count 1
798 + [ 39.705685] wcd938x_codec audio-codec: ASoC: error at snd_soc_component_update_bits on audio-codec for register: [0x00003405] -5
799 + [ 39.723101] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
800 + [ 39.740130] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
801 + [ 39.757273] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
802 + [ 39.774297] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
803 + [ 39.791458] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
804 + [ 39.808586] qcom-soundwire 3230000.soundwire: swrm_wait_for_rd_fifo_avail err read underflow
805 + [ 39.808602] soundwire sdw-master-3-0: trf on Slave 1 failed:-5 read addr 3409 count 1
806 + [ 39.808619] wcd938x_codec audio-codec: ASoC: error at snd_soc_component_update_bits on audio-codec for register: [0x00003409] -5
807 + [ 39.825953] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
808 + [ 39.843111] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
809 + [ 39.860499] qcom-soundwire 3230000.soundwire: swrm_wait_for_rd_fifo_avail err read underflow
810 + [ 39.860514] soundwire sdw-master-3-0: trf on Slave 1 failed:-5 read addr 3408 count 1
811 + [ 39.860531] wcd938x_codec audio-codec: ASoC: error at snd_soc_component_update_bits on audio-codec for register: [0x00003408] -5
812 + [ 39.877943] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
813 + [ 39.895094] qcom-soundwire 3230000.soundwire: swrm_wait_for_rd_fifo_avail err read underflow
814 + [ 39.895109] soundwire sdw-master-3-0: trf on Slave 1 failed:-5 read addr 3408 count 1
815 + [ 39.895126] wcd938x_codec audio-codec: ASoC: error at snd_soc_component_update_bits on audio-codec for register: [0x00003408] -5
816 + [ 39.913702] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
817 + [ 40.154174] Bluetooth: RFCOMM TTY layer initialized
818 + [ 40.154188] Bluetooth: RFCOMM socket layer initialized
819 + [ 40.154197] Bluetooth: RFCOMM ver 1.11
820 + [ 40.945064] rfkill: input handler disabled
821 + [ 45.136088] q6asm-dai 3700000.remoteproc:glink-edge:apr:service@7:dais: command[0x10bdb] not expecting rsp
822 + [ 45.153332] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
823 + [ 45.169856] qcom-soundwire 3230000.soundwire: swrm_wait_for_rd_fifo_avail err read underflow
824 + [ 45.169886] soundwire sdw-master-3-0: trf on Slave 1 failed:-5 read addr 3408 count 1
825 + [ 45.169952] wcd938x_codec audio-codec: ASoC: error at snd_soc_component_update_bits on audio-codec for register: [0x00003408] -5
826 + [ 45.186997] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
827 + [ 45.203712] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
828 + [ 45.220598] qcom-soundwire 3230000.soundwire: swrm_wait_for_rd_fifo_avail err read underflow
829 + [ 45.220621] soundwire sdw-master-3-0: trf on Slave 1 failed:-5 read addr 3409 count 1
830 + [ 45.220638] wcd938x_codec audio-codec: ASoC: error at snd_soc_component_update_bits on audio-codec for register: [0x00003409] -5
831 + [ 45.238005] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
832 + [ 45.255057] qcom-soundwire 3230000.soundwire: swrm_wait_for_rd_fifo_avail err read underflow
833 + [ 45.255102] soundwire sdw-master-3-0: trf on Slave 1 failed:-5 read addr 3408 count 1
834 + [ 45.255126] wcd938x_codec audio-codec: ASoC: error at snd_soc_component_update_bits on audio-codec for register: [0x00003408] -5
835 + [ 45.271996] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
836 + [ 45.288628] qcom-soundwire 3230000.soundwire: swrm_wait_for_rd_fifo_avail err read underflow
837 + [ 45.288651] soundwire sdw-master-3-0: trf on Slave 1 failed:-5 read addr 44 count 1
838 + [ 45.305441] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
839 + [ 45.322105] qcom-soundwire 3230000.soundwire: swrm_wait_for_rd_fifo_avail err read underflow
840 + [ 45.322133] soundwire sdw-master-3-0: trf on Slave 1 failed:-5 read addr 3405 count 1
841 + [ 45.322154] wcd938x_codec audio-codec: ASoC: error at snd_soc_component_update_bits on audio-codec for register: [0x00003405] -5
842 + [ 45.338856] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
843 + [ 45.355646] qcom-soundwire 3230000.soundwire: swrm_wait_for_rd_fifo_avail err read underflow
844 + [ 45.355674] soundwire sdw-master-3-0: trf on Slave 1 failed:-5 read addr 3405 count 1
845 + [ 45.355693] wcd938x_codec audio-codec: ASoC: error at snd_soc_component_update_bits on audio-codec for register: [0x00003405] -5
846 + [ 45.372470] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
847 + [ 45.389379] qcom-soundwire 3230000.soundwire: swrm_wait_for_rd_fifo_avail err read underflow
848 + [ 45.389410] soundwire sdw-master-3-0: trf on Slave 1 failed:-5 read addr 3022 count 1
849 + [ 45.389428] wcd938x_codec audio-codec: ASoC: error at snd_soc_component_update_bits on audio-codec for register: [0x00003022] -5
850 + [ 45.406184] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
851 + [ 45.422691] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
852 + [ 45.557674] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
853 + [ 45.574302] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
854 + [ 45.714642] wcd9380-codec sdw:2:0:0217:010d:00:4: Slave 2 state check1: UNATTACHED, status was 1
855 + [ 49.337097] qcom-soundwire 3230000.soundwire: qcom_swrm_irq_handler: SWR write FIFO overflow fifo status 1600110f
Newer Older

Powered by Opengist ⋅ Load: 95ms⋅

English
⋅ Forgejo