Like 0
Fork 0

Last active 1726784455

Adrian's Avatar Adrian revised this gist 1726784455. Go to revision

1 file changed, 761 insertions

davinci_6_11.txt(file created)

@@ -0,0 +1,761 @@
1 + [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51df805e]
2 + [ 0.000000] Linux version 6.11.0-sm7150 (pmos@karma) (aarch64-alpine-linux-musl-gcc (Alpine 14.2.0) 14.2.0, GNU ld (GNU Binutils) 2.42) #8 SMP PREEMPT Thu Sep 19 21:53:23 UTC 2024
3 + [ 0.000000] KASLR enabled
4 + [ 0.000000] random: crng init done
5 + [ 0.000000] Machine model: Xiaomi Mi 9T
6 + [ 0.000000] earlycon: qcom_geni0 at MMIO 0x0000000000a88000 (options '115200n8')
7 + [ 0.000000] printk: legacy bootconsole [qcom_geni0] enabled
8 + [ 0.000000] efi: UEFI not found.
9 + [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
10 + [ 0.000000] OF: reserved mem: 0x0000000085700000..0x0000000085cfffff (6144 KiB) nomap non-reusable hypervisor@85700000
11 + [ 0.000000] OF: reserved mem: 0x0000000085d00000..0x0000000085efffff (2048 KiB) nomap non-reusable xbl@85d00000
12 + [ 0.000000] OF: reserved mem: 0x0000000085f00000..0x0000000085f1ffff (128 KiB) nomap non-reusable aop@85f00000
13 + [ 0.000000] OF: reserved mem: 0x0000000085f20000..0x0000000085f3ffff (128 KiB) nomap non-reusable aop-cmd-db@85f20000
14 + [ 0.000000] OF: reserved mem: 0x0000000085fff000..0x0000000085ffffff (4 KiB) nomap non-reusable sec-apps@85fff000
15 + [ 0.000000] OF: reserved mem: 0x0000000086000000..0x00000000861fffff (2048 KiB) nomap non-reusable smem@86000000
16 + [ 0.000000] OF: reserved mem: 0x0000000086200000..0x000000008aafffff (74752 KiB) nomap non-reusable trust-zone@86200000
17 + [ 0.000000] OF: reserved mem: 0x000000008ab00000..0x000000008affffff (5120 KiB) nomap non-reusable camera@8ab00000
18 + [ 0.000000] OF: reserved mem: 0x000000008b000000..0x00000000933fffff (135168 KiB) nomap non-reusable mpss@8b000000
19 + [ 0.000000] OF: reserved mem: 0x0000000093400000..0x00000000938fffff (5120 KiB) nomap non-reusable venus@93400000
20 + [ 0.000000] OF: reserved mem: 0x0000000093900000..0x00000000956fffff (30720 KiB) nomap non-reusable cdsp@93900000
21 + [ 0.000000] OF: reserved mem: 0x0000000095700000..0x0000000097cfffff (38912 KiB) nomap non-reusable adsp@95700000
22 + [ 0.000000] OF: reserved mem: 0x0000000097d00000..0x0000000097e7ffff (1536 KiB) nomap non-reusable wlan_msa@97d00000
23 + [ 0.000000] OF: reserved mem: 0x0000000097e80000..0x0000000097efffff (512 KiB) nomap non-reusable npu@97e80000
24 + [ 0.000000] OF: reserved mem: 0x0000000097f00000..0x0000000097f0ffff (64 KiB) nomap non-reusable ipa_fw@97f00000
25 + [ 0.000000] OF: reserved mem: 0x0000000097f10000..0x0000000097f14fff (20 KiB) nomap non-reusable ipa_gsi@97f10000
26 + [ 0.000000] OF: reserved mem: 0x0000000097f15000..0x0000000097f16fff (8 KiB) nomap non-reusable gpu@97f15000
27 + [ 0.000000] OF: reserved mem: 0x000000009c000000..0x000000009d6fffff (23552 KiB) nomap non-reusable splash_region@9c000000
28 + [ 0.000000] OF: reserved mem: 0x000000009d700000..0x000000009d7fffff (1024 KiB) nomap non-reusable dfps-data@9e300000
29 + [ 0.000000] OF: reserved mem: 0x000000009d800000..0x000000009dbfffff (4096 KiB) map non-reusable ramoops@9d800000
30 + [ 0.000000] OF: reserved mem: 0x000000009e400000..0x000000009f7fffff (20480 KiB) nomap non-reusable qseecom@9e400000
31 + [ 0.000000] OF: reserved mem: 0x000000009f800000..0x00000000a15fffff (30720 KiB) nomap non-reusable sec-cdsp@9f800000
32 + [ 0.000000] OF: reserved mem: 0x00000000f2e01000..0x00000000f3400fff (6144 KiB) nomap non-reusable rmtfs@f2e01000
33 + [ 0.000000] NUMA: No NUMA configuration found
34 + [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000001fcbfffff]
35 + [ 0.000000] NUMA: NODE_DATA [mem 0x1fc0448c0-0x1fc046fff]
36 + [ 0.000000] Zone ranges:
37 + [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
38 + [ 0.000000] DMA32 empty
39 + [ 0.000000] Normal [mem 0x0000000100000000-0x00000001fcbfffff]
40 + [ 0.000000] Movable zone start for each node
41 + [ 0.000000] Early memory node ranges
42 + [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000856fffff]
43 + [ 0.000000] node 0: [mem 0x0000000085700000-0x0000000085f3ffff]
44 + [ 0.000000] node 0: [mem 0x0000000085f40000-0x0000000085ffefff]
45 + [ 0.000000] node 0: [mem 0x0000000085fff000-0x0000000097f16fff]
46 + [ 0.000000] node 0: [mem 0x0000000097f17000-0x000000009bffffff]
47 + [ 0.000000] node 0: [mem 0x000000009c000000-0x000000009d7fffff]
48 + [ 0.000000] node 0: [mem 0x000000009d800000-0x000000009e3fffff]
49 + [ 0.000000] node 0: [mem 0x000000009e400000-0x00000000a15fffff]
50 + [ 0.000000] node 0: [mem 0x00000000a1600000-0x00000000f2e00fff]
51 + [ 0.000000] node 0: [mem 0x00000000f2e01000-0x00000000f3400fff]
52 + [ 0.000000] node 0: [mem 0x00000000f3401000-0x00000001fcbfffff]
53 + [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000001fcbfffff]
54 + [ 0.000000] On node 0, zone Normal: 13312 pages in unavailable ranges
55 + [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1
56 + [ 0.000000] psci: probing for conduit method from DT.
57 + [ 0.000000] psci: PSCIv1.1 detected in firmware.
58 + [ 0.000000] psci: Using standard PSCI v0.2 function IDs
59 + [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
60 + [ 0.000000] psci: SMC Calling Convention v1.1
61 + [ 0.000000] psci: OSI mode supported.
62 + [ 0.000000] psci: [Firmware Bug]: failed to set PC mode: -3
63 + [ 0.000000] percpu: Embedded 23 pages/cpu s53528 r8192 d32488 u94208
64 + [ 0.000000] pcpu-alloc: s53528 r8192 d32488 u94208 alloc=23*4096
65 + [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
66 + [ 0.000000] Detected VIPT I-cache on CPU0
67 + [ 0.000000] CPU features: detected: GIC system register CPU interface
68 + [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
69 + [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
70 + [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
71 + [ 0.000000] alternatives: applying boot alternatives
72 + [ 0.000000] Kernel command line: earlycon console=ttyMSM0,115200 console=null pmos_boot_uuid=85621b61-2735-479f-9436-015305aba4f1 pmos_root_uuid=ce7e1c51-21ae-41fc-a204-cf7652b0ffe2 pmos_rootfsopts=defaults androidboot.verifiedbootstate=orange androidboot.keymaster=1 root=PARTUUID=605d118e-3d23-fc84-e5ae-711fbf93c0fa androidboot.bootdevice=1d84000.ufshc androidboot.fstab_suffix=default androidboot.serialno=53b4d859 androidboot.ramdump=disable androidboot.secureboot=1 androidboot.cpuid=0x7c0d5e6a androidboot.hwversion=5.19.0 androidboot.hwc=GLOBAL androidboot.hwlevel=MP androidboot.baseband=msm msm_drm.dsi_display0=dsi_ss_fhd_ea_f10_cmd_display: skip_initramfs rootwait ro init=/init androidboot.dtb_idx=-1347440721 androidboot.dp=0x0
73 + [ 0.000000] Unknown kernel command line parameters "pmos_boot_uuid=85621b61-2735-479f-9436-015305aba4f1 pmos_root_uuid=ce7e1c51-21ae-41fc-a204-cf7652b0ffe2 pmos_rootfsopts=defaults", will be passed to user space.
74 + [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
75 + [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
76 + [ 0.000000] Fallback order for Node 0: 0
77 + [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1559552
78 + [ 0.000000] Policy zone: Normal
79 + [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
80 + [ 0.000000] software IO TLB: area num 8.
81 + [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB)
82 + [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
83 + [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
84 + [ 0.000000] rcu: RCU event tracing is enabled.
85 + [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
86 + [ 0.000000] Trampoline variant of Tasks RCU enabled.
87 + [ 0.000000] Tracing variant of Tasks RCU enabled.
88 + [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
89 + [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
90 + [ 0.000000] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
91 + [ 0.000000] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
92 + [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
93 + [ 0.000000] GICv3: 928 SPIs implemented
94 + [ 0.000000] GICv3: 0 Extended SPIs implemented
95 + [ 0.000000] Root IRQ handler: gic_handle_irq
96 + [ 0.000000] GICv3: GICv3 features: 16 PPIs
97 + [ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=1
98 + [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
99 + [ 0.000000] ITS: No ITS available, not enabling LPIs
100 + [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
101 + [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
102 + [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
103 + [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
104 + [ 0.008438] Console: colour dummy device 80x25
105 + [ 0.013083] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
106 + [ 0.023623] pid_max: default: 32768 minimum: 301
107 + [ 0.028441] LSM: initializing lsm=capability
108 + [ 0.032917] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
109 + [ 0.040710] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
110 + [ 0.050692] rcu: Hierarchical SRCU implementation.
111 + [ 0.055637] rcu: Max phase no-delay instances is 1000.
112 + [ 0.061145] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
113 + [ 0.069923] EFI services will not be available.
114 + [ 0.074818] smp: Bringing up secondary CPUs ...
115 + [ 0.080621] Detected VIPT I-cache on CPU1
116 + [ 0.080699] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
117 + [ 0.080753] CPU1: Booted secondary processor 0x0000000100 [0x51df805e]
118 + [ 0.081906] Detected VIPT I-cache on CPU2
119 + [ 0.081967] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
120 + [ 0.082008] CPU2: Booted secondary processor 0x0000000200 [0x51df805e]
121 + [ 0.083164] Detected VIPT I-cache on CPU3
122 + [ 0.083215] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
123 + [ 0.083252] CPU3: Booted secondary processor 0x0000000300 [0x51df805e]
124 + [ 0.084507] Detected VIPT I-cache on CPU4
125 + [ 0.084559] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
126 + [ 0.084595] CPU4: Booted secondary processor 0x0000000400 [0x51df805e]
127 + [ 0.085922] Detected VIPT I-cache on CPU5
128 + [ 0.085978] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
129 + [ 0.086014] CPU5: Booted secondary processor 0x0000000500 [0x51df805e]
130 + [ 0.088130] CPU features: detected: Spectre-v2
131 + [ 0.088178] CPU features: detected: ARM erratum 1418040
132 + [ 0.088198] Detected PIPT I-cache on CPU6
133 + [ 0.088327] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
134 + [ 0.088358] arch_timer: Enabling local workaround for ARM erratum 1418040
135 + [ 0.088397] CPU6: Booted secondary processor 0x0000000600 [0x51df804e]
136 + [ 0.090376] Detected PIPT I-cache on CPU7
137 + [ 0.090528] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
138 + [ 0.090559] arch_timer: Enabling local workaround for ARM erratum 1418040
139 + [ 0.090599] CPU7: Booted secondary processor 0x0000000700 [0x51df804e]
140 + [ 0.090810] smp: Brought up 1 node, 8 CPUs
141 + [ 0.245435] SMP: Total of 8 processors activated.
142 + [ 0.250283] CPU: All CPU(s) started at EL1
143 + [ 0.254517] CPU features: detected: 32-bit EL0 Support
144 + [ 0.259810] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
145 + [ 0.268663] CPU features: detected: Common not Private translations
146 + [ 0.275105] CPU features: detected: CRC32 instructions
147 + [ 0.280397] CPU features: detected: RCpc load-acquire (LDAPR)
148 + [ 0.286302] CPU features: detected: LSE atomic instructions
149 + [ 0.292035] CPU features: detected: Privileged Access Never
150 + [ 0.297767] CPU features: detected: RAS Extension Support
151 + [ 0.303411] alternatives: applying system-wide alternatives
152 + [ 0.311705] CPU features: detected: Hardware dirty bit management on CPU6-7
153 + [ 0.319236] Memory: 5590892K/6238208K available (13440K kernel code, 1488K rwdata, 4912K rodata, 3008K init, 616K bss, 608476K reserved, 32768K cma-reserved)
154 + [ 0.335412] devtmpfs: initialized
155 + [ 0.359448] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
156 + [ 0.369510] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
157 + [ 0.377505] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
158 + [ 0.383959] 0 pages in range for non-PLT usage
159 + [ 0.383965] 518368 pages in range for PLT usage
160 + [ 0.388888] pinctrl core: initialized pinctrl subsystem
161 + [ 0.399525] DMI not present or invalid.
162 + [ 0.407382] NET: Registered PF_NETLINK/PF_ROUTE protocol family
163 + [ 0.414724] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
164 + [ 0.422373] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
165 + [ 0.430886] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
166 + [ 0.439173] audit: initializing netlink subsys (disabled)
167 + [ 0.444874] audit: type=2000 audit(0.320:1): state=initialized audit_enabled=0 res=1
168 + [ 0.445389] thermal_sys: Registered thermal governor 'step_wise'
169 + [ 0.452850] thermal_sys: Registered thermal governor 'power_allocator'
170 + [ 0.459131] cpuidle: using governor menu
171 + [ 0.470017] NET: Registered PF_QIPCRTR protocol family
172 + [ 0.475668] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
173 + [ 0.482880] ASID allocator initialised with 32768 entries
174 + [ 0.488718] Serial: AMBA PL011 UART driver
175 + [ 0.494578] pstore: Using crash dump compression: deflate
176 + [ 0.500178] printk: legacy console [ramoops-1] enabled
177 + [ 0.506518] pstore: Registered ramoops as persistent store backend
178 + [ 0.512906] ramoops: using 0x400000@0x9d800000, ecc: 0
179 + [ 0.521298] CPUidle PSCI: Initialized CPU PM domain topology using OSI mode
180 + [ 0.558597] platform 1d84000.ufshc: Fixed dependency cycle(s) with /soc@0/phy@1d87000
181 + [ 0.566929] platform 1d84000.ufshc: Fixed dependency cycle(s) with /soc@0/phy@1d87000
182 + [ 0.575086] platform 1d87000.phy: Fixed dependency cycle(s) with /soc@0/ufshc@1d84000
183 + [ 0.590965] platform ace0000.camss: Fixed dependency cycle(s) with /soc@0/cci@ac4a000/i2c-bus@1/camera@36
184 + [ 0.600879] platform ace0000.camss: Fixed dependency cycle(s) with /soc@0/cci@ac4b000/i2c-bus@0/camera@10
185 + [ 0.611658] platform ae00000.display-subsystem: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000
186 + [ 0.622254] platform ae00000.display-subsystem: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000
187 + [ 0.632568] platform af00000.clock-controller: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/phy@ae94400
188 + [ 0.654663] platform 18200000.rsc:regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps5
189 + [ 0.665631] platform 18200000.rsc:regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps4
190 + [ 0.676791] platform 18200000.rsc:regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-1/bob
191 + [ 0.687556] platform 18200000.rsc:regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-1/smps8
192 + [ 0.702567] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
193 + [ 0.709584] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
194 + [ 0.716043] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
195 + [ 0.723036] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
196 + [ 0.729488] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
197 + [ 0.736478] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
198 + [ 0.742930] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
199 + [ 0.749917] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
200 + [ 0.762393] iommu: Default domain type: Translated
201 + [ 0.767378] iommu: DMA domain TLB invalidation policy: strict mode
202 + [ 0.774388] SCSI subsystem initialized
203 + [ 0.778470] usbcore: registered new interface driver usbfs
204 + [ 0.784156] usbcore: registered new interface driver hub
205 + [ 0.789670] usbcore: registered new device driver usb
206 + [ 0.795050] pps_core: LinuxPPS API ver. 1 registered
207 + [ 0.800173] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
208 + [ 0.809574] PTP clock support registered
209 + [ 0.813667] EDAC MC: Ver: 3.0.0
210 + [ 0.817317] scmi_core: SCMI protocol bus registered
211 + [ 0.823364] Advanced Linux Sound Architecture Driver Initialized.
212 + [ 0.830663] vgaarb: loaded
213 + [ 0.833957] clocksource: Switched to clocksource arch_sys_counter
214 + [ 0.840555] VFS: Disk quotas dquot_6.6.0
215 + [ 0.844652] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
216 + [ 0.859226] NET: Registered PF_INET protocol family
217 + [ 0.864624] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
218 + [ 0.884628] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
219 + [ 0.893475] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
220 + [ 0.901478] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
221 + [ 0.910203] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
222 + [ 0.918995] TCP: Hash tables configured (established 65536 bind 65536)
223 + [ 0.925831] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
224 + [ 0.932946] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
225 + [ 0.940615] NET: Registered PF_UNIX/PF_LOCAL protocol family
226 + [ 0.946864] RPC: Registered named UNIX socket transport module.
227 + [ 0.952988] RPC: Registered udp transport module.
228 + [ 0.957840] RPC: Registered tcp transport module.
229 + [ 0.962696] RPC: Registered tcp-with-tls transport module.
230 + [ 0.968347] RPC: Registered tcp NFSv4.1 backchannel transport module.
231 + [ 0.974984] PCI: CLS 0 bytes, default 64
232 + [ 0.979182] Trying to unpack rootfs image as initramfs...
233 + [ 0.986201] Initialise system trusted keyrings
234 + [ 0.990990] workingset: timestamp_bits=42 max_order=21 bucket_order=0
235 + [ 0.998070] squashfs: version 4.0 (2009/01/31) Phillip Lougher
236 + [ 1.004376] NFS: Registering the id_resolver key type
237 + [ 1.009631] Key type id_resolver registered
238 + [ 1.013955] Key type id_legacy registered
239 + [ 1.018127] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
240 + [ 1.025035] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
241 + [ 1.117530] Key type asymmetric registered
242 + [ 1.121776] Asymmetric key parser 'x509' registered
243 + [ 1.126809] Asymmetric key parser 'pkcs8' registered
244 + [ 1.132011] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
245 + [ 1.139798] io scheduler mq-deadline registered
246 + [ 1.144487] io scheduler kyber registered
247 + [ 1.148671] io scheduler bfq registered
248 + [ 1.162853] simple-framebuffer 9c000000.framebuffer: framebuffer at 0x9c000000, 0x9a3f80 bytes
249 + [ 1.171766] simple-framebuffer 9c000000.framebuffer: format=a8r8g8b8, mode=1080x2340x32, linelength=4320
250 + [ 1.195883] Console: switching to colour frame buffer device 135x146
251 + [ 1.216561] simple-framebuffer 9c000000.framebuffer: fb0: simplefb registered!
252 + [ 1.237745] smps1: Setting 1000000-1200000uV
253 + [ 1.240975] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
254 + [ 1.242370] smps8: Setting 1120000-1408000uV
255 + [ 1.251148] msm_serial: driver initialized
256 + [ 1.253212] ldo1: Setting 1616000-1984000uV
257 + [ 1.261941] ldo2: Setting 1200000-1352000uV
258 + [ 1.266578] ldo3: Setting 1144000-1256000uV
259 + [ 1.271120] ldo4: Setting 1648000-2950000uV
260 + [ 1.274893] brd: module loaded
261 + [ 1.275617] ldo5: Setting 1648000-2950000uV
262 + [ 1.283129] ldo6: Setting 1648000-3100000uV
263 + [ 1.284445] loop: module loaded
264 + [ 1.287633] ldo7: Setting 3000000-3312000uV
265 + [ 1.291826] spmi_pmic_arb c440000.spmi: PMIC arbiter version v5 (0x50000000)
266 + [ 1.295230] ldo8: Setting 1800000-1900000uV
267 + [ 1.307014] ldo9: Setting 2950000-3100000uV
268 + [ 1.311535] ldo10: Setting 3200000-3312000uV
269 + [ 1.315504] tun: Universal TUN/TAP device driver, 1.6
270 + [ 1.316143] ldo11: Setting 2950000-3400000uV
271 + [ 1.321467] thunder_xcv, ver 1.0
272 + [ 1.325722] bob: Setting 3296000-3960000uV
273 + [ 1.328923] thunder_bgx, ver 1.0
274 + [ 1.336506] nicpf, ver 1.0
275 + [ 1.339339] e1000: Intel(R) PRO/1000 Network Driver
276 + [ 1.340690] Freeing initrd memory: 5620K
277 + [ 1.344365] e1000: Copyright (c) 1999-2006 Intel Corporation.
278 + [ 1.344401] e1000e: Intel(R) PRO/1000 Network Driver
279 + [ 1.359488] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
280 + [ 1.365777] sky2: driver version 1.30
281 + [ 1.370082] VFIO - User Level meta-driver version: 0.3
282 + [ 1.376764] usbcore: registered new interface driver usb-storage
283 + [ 1.384333] i2c_dev: i2c /dev entries driver
284 + [ 1.390844] input: pm8941_pwrkey as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@800/c440000.spmi:pmic@0:pon@800:pwrkey/input/input0
285 + [ 1.406995] input: pm8941_resin as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@800/c440000.spmi:pmic@0:pon@800:resin/input/input1
286 + [ 1.436163] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
287 + [ 1.448328] sdhci: Secure Digital Host Controller Interface driver
288 + [ 1.454727] sdhci: Copyright(c) Pierre Ossman
289 + [ 1.459282] Synopsys Designware Multimedia Card Interface Driver
290 + [ 1.465668] sdhci-pltfm: SDHCI platform and OF driver helper
291 + [ 1.474158] ledtrig-cpu: registered to indicate activity on CPUs
292 + [ 1.481067] hid: raw HID events driver (C) Jiri Kosina
293 + [ 1.489785] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
294 + [ 1.503139] NET: Registered PF_PACKET protocol family
295 + [ 1.508489] Key type dns_resolver registered
296 + [ 1.524380] registered taskstats version 1
297 + [ 1.529054] Loading compiled-in X.509 certificates
298 + [ 1.544084] Demotion targets for Node 0: null
299 + [ 1.581837] cpu cpu0: EM: created perf domain
300 + [ 1.598828] cpu cpu6: EM: created perf domain
301 + [ 1.606146] qcom_scm: convention: smc arm 64
302 + [ 1.611136] qcom_scm firmware:scm: qseecom: found qseecom with version 0x1400000
303 + [ 1.618764] qcom_scm firmware:scm: qseecom: untested machine, skipping
304 + [ 1.629976] arm-smmu 5040000.iommu: probing hardware configuration...
305 + [ 1.630157] smps4: Setting 824000-1120000uV
306 + [ 1.636592] arm-smmu 5040000.iommu: SMMUv2 with:
307 + [ 1.636606] arm-smmu 5040000.iommu: stage 1 translation
308 + [ 1.641107] smps5: Setting 1744000-2040000uV
309 + [ 1.645635] arm-smmu 5040000.iommu: address translation ops
310 + [ 1.645636] arm-smmu 5040000.iommu: non-coherent table walk
311 + [ 1.645638] arm-smmu 5040000.iommu: (IDR0.CTTW overridden by FW configuration)
312 + [ 1.645640] arm-smmu 5040000.iommu: stream matching with 5 register groups
313 + [ 1.645655] arm-smmu 5040000.iommu: 5 context banks (0 stage-2 only)
314 + [ 1.651244] ldo1: Setting 1096000-1304000uV
315 + [ 1.655497] arm-smmu 5040000.iommu: Supported page sizes: 0x63315000
316 + [ 1.661724] ldo2: Setting 944000-1056000uV
317 + [ 1.667120] arm-smmu 5040000.iommu: Stage-1: 48-bit VA -> 36-bit IPA
318 + [ 1.667215] arm-smmu 5040000.iommu: preserved 0 boot mappings
319 + [ 1.675071] ldo3: Setting 968000-1064000uV
320 + [ 1.683399] arm-smmu 15000000.iommu: probing hardware configuration...
321 + [ 1.688878] ldo4: Setting 824000-920000uV
322 + [ 1.692714] arm-smmu 15000000.iommu: SMMUv2 with:
323 + [ 1.692722] arm-smmu 15000000.iommu: stage 1 translation
324 + [ 1.692724] arm-smmu 15000000.iommu: non-coherent table walk
325 + [ 1.692725] arm-smmu 15000000.iommu: (IDR0.CTTW overridden by FW configuration)
326 + [ 1.692726] arm-smmu 15000000.iommu: stream matching with 79 register groups
327 + [ 1.692747] arm-smmu 15000000.iommu: 61 context banks (0 stage-2 only)
328 + [ 1.699738] ldo5: Setting 2600000-2800000uV
329 + [ 1.703966] arm-smmu 15000000.iommu: Supported page sizes: 0x61311000
330 + [ 1.710636] ldo6: Setting 1096000-1304000uV
331 + [ 1.716175] arm-smmu 15000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
332 + [ 1.716244] arm-smmu 15000000.iommu: preserved 0 boot mappings
333 + [ 1.720679] ldo9: Setting 624000-760000uV
334 + [ 1.729192] msm-mdss ae00000.display-subsystem: Adding to iommu group 0
335 + [ 1.731507] ldo10: Setting 1720000-1832000uV
336 + [ 1.736246] arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x800
337 + [ 1.736324] platform ae01000.display-controller: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
338 + [ 1.831625] arm-smmu 15000000.iommu: FSYNR0 = 004d0020 [S1CBNDX=77 PNU PLVL=0]
339 + [ 1.839377] ldo11: Setting 1696000-1984000uV
340 + [ 1.840226] platform ae01000.display-controller: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
341 + [ 1.844238] ldo12: Setting 1696000-1952000uV
342 + [ 1.855347] platform ae94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0
343 + [ 1.860209] ldo13: Setting 1696000-1904000uV
344 + [ 1.870581] platform ae94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/display-controller@ae01000
345 + [ 1.887043] ldo14: Setting 1720000-1856000uV
346 + [ 1.890032] platform a600000.usb: Fixed dependency cycle(s) with /soc@0/spmi@c440000/pmic@0/typec@1500/connector
347 + [ 1.891863] ldo15: Setting 1696000-1904000uV
348 + [ 1.902903] gpi 800000.dma-controller: Adding to iommu group 1
349 + [ 1.906838] ldo16: Setting 1800000-1800000uV
350 + [ 1.912644] gpi a00000.dma-controller: Adding to iommu group 2
351 + [ 1.917180] ldo17: Setting 3000000-3232000uV
352 + [ 1.923020] geni_se_qup 8c0000.geniqup: Adding to iommu group 3
353 + [ 1.927599] ldo18: Setting 3000000-3000000uV
354 + [ 1.936603] 88c000.serial: ttyHS0 at MMIO 0x88c000 (irq = 134, base_baud = 0) is a MSM
355 + [ 1.938093] ldo19: Setting 2944000-3304000uV
356 + [ 1.946298] serial serial0: tty port ttyHS0 registered
357 + [ 1.957348] geni_se_qup ac0000.geniqup: Adding to iommu group 4
358 + [ 1.966662] a88000.serial: ttyMSM0 at MMIO 0xa88000 (irq = 138, base_baud = 0) is a MSM
359 + [ 1.981079] printk: legacy console [ttyMSM0] enabled
360 + [ 4.345914] ufshcd-qcom 1d84000.ufshc: Adding to iommu group 5
361 + [ 4.358533] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
362 + [ 4.380518] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
363 + [ 4.424021] qcom-qusb2-phy 88e2000.phy: Registered Qcom-QUSB2 phy
364 + [ 4.438561] adreno 5000000.gpu: Adding to iommu group 6
365 + [ 4.450496] msm_dsi ae94000.dsi: supply refgen not found, using dummy regulator
366 + [ 4.465745] msm_dsi ae94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0
367 + [ 4.487900] mipi-dsi ae94000.dsi.0: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000
368 + [ 4.509001] dwc3 a600000.usb: Adding to iommu group 7
369 + [ 4.531761] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
370 + [ 4.553730] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
371 + [ 4.578557] scsi host0: ufshcd
372 + [ 4.594604] input: gpio-keys as /devices/platform/gpio-keys/input/input2
373 + [ 4.608847] clk: Disabling unused clocks
374 + [ 4.618660] PM: genpd: Disabling unused power domains
375 + [ 4.632648] ALSA device list:
376 + [ 4.638778] No soundcards found.
377 + [ 4.712355] scsi 0:0:0:49488: Well-known LUN SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6
378 + [ 4.734344] scsi 0:0:0:49476: Well-known LUN SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6
379 + [ 4.753389] scsi 0:0:0:49456: Well-known LUN SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6
380 + [ 4.775403] scsi 0:0:0:0: Direct-Access SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6
381 + [ 4.798576] scsi 0:0:0:1: Direct-Access SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6
382 + [ 4.821316] scsi 0:0:0:2: Direct-Access SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6
383 + [ 4.846883] scsi 0:0:0:3: Direct-Access SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6
384 + [ 4.869338] scsi 0:0:0:4: Direct-Access SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6
385 + [ 4.892401] scsi 0:0:0:5: Direct-Access SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6
386 + [ 4.916989] sd 0:0:0:0: [sda] 30922752 4096-byte logical blocks: (127 GB/118 GiB)
387 + [ 4.917242] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
388 + [ 4.918551] sd 0:0:0:5: [sdf] 40960 4096-byte logical blocks: (168 MB/160 MiB)
389 + [ 4.918668] sd 0:0:0:4: [sde] 262144 4096-byte logical blocks: (1.07 GB/1.00 GiB)
390 + [ 4.918767] sd 0:0:0:5: [sdf] Write Protect is off
391 + [ 4.918770] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
392 + [ 4.918885] sd 0:0:0:4: [sde] Write Protect is off
393 + [ 4.918892] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
394 + [ 4.918989] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
395 + [ 4.919156] sd 0:0:0:5: [sdf] Preferred minimum I/O size 8192 bytes
396 + [ 4.919158] sd 0:0:0:5: [sdf] Optimal transfer size 8192 bytes
397 + [ 4.919282] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
398 + [ 4.919470] sd 0:0:0:4: [sde] Preferred minimum I/O size 8192 bytes
399 + [ 4.919476] sd 0:0:0:4: [sde] Optimal transfer size 8192 bytes
400 + [ 4.924706] sd 0:0:0:1: [sdb] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
401 + [ 4.932519] sd 0:0:0:2: [sdc] Write Protect is off
402 + [ 4.939624] sd 0:0:0:3: [sdd] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB)
403 + [ 4.940026] sd 0:0:0:0: [sda] Write Protect is off
404 + [ 4.940033] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
405 + [ 4.940497] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
406 + [ 4.940714] sd 0:0:0:0: [sda] Preferred minimum I/O size 8192 bytes
407 + [ 4.940720] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes
408 + [ 4.947340] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
409 + [ 4.947626] sd 0:0:0:1: [sdb] Write Protect is off
410 + [ 4.947633] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
411 + [ 4.948013] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
412 + [ 4.948204] sd 0:0:0:1: [sdb] Preferred minimum I/O size 8192 bytes
413 + [ 4.948210] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes
414 + [ 4.952435] sd 0:0:0:3: [sdd] Write Protect is off
415 + [ 4.960087] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
416 + [ 4.964841] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
417 + [ 4.972427] sd 0:0:0:2: [sdc] Preferred minimum I/O size 8192 bytes
418 + [ 4.981499] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
419 + [ 4.987551] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes
420 + [ 4.993940] sd 0:0:0:3: [sdd] Preferred minimum I/O size 8192 bytes
421 + [ 4.999711] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8
422 + [ 4.999957] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32
423 + [ 5.001051] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51
424 + [ 5.001929] sd 0:0:0:5: [sdf] Attached SCSI disk
425 + [ 5.006841] sd 0:0:0:0: [sda] Attached SCSI disk
426 + [ 5.007394] sd 0:0:0:4: [sde] Attached SCSI disk
427 + [ 5.008942] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes
428 + [ 5.012328] sdb: sdb1 sdb2
429 + [ 5.012595] sd 0:0:0:1: [sdb] Attached SCSI disk
430 + [ 5.029085] sdc: sdc1 sdc2
431 + [ 5.475539] sd 0:0:0:2: [sdc] Attached SCSI disk
432 + [ 5.490146] sdd: sdd1 sdd2 sdd3 sdd4 sdd5
433 + [ 5.500312] sd 0:0:0:3: [sdd] Attached SCSI disk
434 + [ 5.510874] Freeing unused kernel memory: 3008K
435 + [ 5.520340] Run /init as init process
436 + [ 5.527921] with arguments:
437 + [ 5.527926] /init
438 + [ 5.527930] with environment:
439 + [ 5.527935] HOME=/
440 + [ 5.527940] TERM=linux
441 + [ 5.527945] pmos_boot_uuid=85621b61-2735-479f-9436-015305aba4f1
442 + [ 5.527951] pmos_root_uuid=ce7e1c51-21ae-41fc-a204-cf7652b0ffe2
443 + [ 5.527956] pmos_rootfsopts=defaults
444 + [ 5.565279] syslogd started: BusyBox v1.36.1
445 + [ 5.574413] [pmOS-rd]: Configuring kernel firmware image search path
446 + [ 5.574566] udevd[184]: starting version 3.2.14
447 + [ 5.611553] udevd[185]: starting eudev-3.2.14
448 + [ 5.704319] udevd[202]: ctx=0xffffbbb0ba30 path=/lib/modules/6.11.0-sm7150/kernel/drivers/net/wireless/ath/ath10k/ath10k_core.ko error=No such file or directory
449 + [ 5.722136] udevd[210]: ctx=0xffffbbb0ba30 path=/lib/modules/6.11.0-sm7150/kernel/drivers/remoteproc/qcom_common.ko error=No such file or directory
450 + [ 5.722590] udevd[203]: ctx=0xffffbbb0ba30 path=/lib/modules/6.11.0-sm7150/kernel/drivers/remoteproc/qcom_pil_info.ko error=No such file or directory
451 + [ 5.729186] udevd[189]: ctx=0xffffbbb0ba30 path=/lib/modules/6.11.0-sm7150/kernel/drivers/remoteproc/qcom_pil_info.ko error=No such file or directory
452 + [ 5.735124] udevd[207]: ctx=0xffffbbb0ba30 path=/lib/modules/6.11.0-sm7150/kernel/drivers/remoteproc/qcom_pil_info.ko error=No such file or directory
453 + [ 5.751823] udevd[189]: ctx=0xffffbbb0ba30 path=/lib/modules/6.11.0-sm7150/kernel/drivers/bluetooth/btqca.ko error=No such file or directory
454 + [ 5.753683] udevd[210]: ctx=0xffffbbb0ba30 path=/lib/modules/6.11.0-sm7150/kernel/sound/soc/qcom/snd-soc-qcom-sdw.ko error=No such file or directory
455 + [ 5.949354] udevd[215]: ctx=0xffffbbb0ba30 path=/lib/modules/6.11.0-sm7150/kernel/drivers/iio/adc/qcom-vadc-common.ko error=No such file or directory
456 + [ 5.951371] udevd[195]: ctx=0xffffbbb0ba30 path=/lib/modules/6.11.0-sm7150/kernel/drivers/iio/adc/qcom-vadc-common.ko error=No such file or directory
457 + [ 5.963998] msm_dpu ae01000.display-controller: bound ae94000.dsi (ops dsi_ops)
458 + [ 5.967714] udevd[203]: ctx=0xffffbbb0ba30 path=/lib/modules/6.11.0-sm7150/kernel/drivers/soc/qcom/qcom-pbs.ko error=No such file or directory
459 + [ 5.968309] udevd[223]: failed to execute '/usr/libexec/fbd-ledctrl' '/usr/libexec/fbd-ledctrl -p /sys/devices/platform/soc@0/c440000.spmi/spmi-0/0-05/c440000.spmi:pmic@5:led-controller@d300/leds/yellow:flash -t pattern -G feedbackd': No such file or directory
460 + [ 5.968904] udevd[222]: failed to execute '/usr/libexec/fbd-ledctrl' '/usr/libexec/fbd-ledctrl -p /sys/devices/platform/soc@0/c440000.spmi/spmi-0/0-05/c440000.spmi:pmic@5:led-controller@d300/leds/white:flash -t pattern -G feedbackd': No such file or directory
461 + [ 5.996311] udevd[227]: failed to execute '/usr/libexec/elogind/elogind-uaccess-command' '/usr/libexec/elogind/elogind-uaccess-command /dev/snd/timer ': No such file or directory
462 + [ 6.000257] adreno 5000000.gpu: supply vdd not found, using dummy regulator
463 + [ 6.187650] adreno 5000000.gpu: supply vddcx not found, using dummy regulator
464 + [ 6.204064] platform 506a000.gmu: Adding to iommu group 8
465 + [ 6.215902] msm_dpu ae01000.display-controller: bound 5000000.gpu (ops a3xx_ops)
466 + [ 6.231976] Console: switching to colour dummy device 80x25
467 + [ 6.245093] [drm:dpu_kms_hw_init:1108] dpu hardware revision:0x50020000
468 + [ 6.261224] [drm] Initialized msm 1.12.0 for ae01000.display-controller on minor 0
469 + [ 6.263171] udevd[242]: failed to execute '/usr/libexec/elogind/elogind-uaccess-command' '/usr/libexec/elogind/elogind-uaccess-command /dev/dri/card0 ': No such file or directory
470 + [ 6.269227] msm_dpu ae01000.display-controller: [drm:adreno_request_fw] loaded qcom/a630_sqe.fw from new location
471 + [ 6.289349] udevd[243]: failed to execute '/usr/libexec/elogind/elogind-uaccess-command' '/usr/libexec/elogind/elogind-uaccess-command /dev/dri/card0 ': No such file or directory
472 + [ 6.295984] msm_dpu ae01000.display-controller: [drm:adreno_request_fw] loaded qcom/a630_gmu.bin from new location
473 + [ 6.315557] udevd[244]: failed to execute '/usr/libexec/elogind/elogind-uaccess-command' '/usr/libexec/elogind/elogind-uaccess-command /dev/dri/card0 ': No such file or directory
474 + [ 6.326215] adreno 5000000.gpu: [drm:adreno_zap_shader_load] *ERROR* Unable to load qcom/sm7150/davinci/a615_zap.mbn
475 + [ 6.401099] input: goodix_ts as /devices/virtual/input/input3
476 + [ 6.411481] msm_dpu ae01000.display-controller: [drm:adreno_load_gpu] *ERROR* gpu hw init failed: -2
477 + [ 6.420043] udevd[245]: failed to execute '/usr/libexec/elogind/elogind-uaccess-command' '/usr/libexec/elogind/elogind-uaccess-command /dev/dri/card0 ': No such file or directory
478 + [ 6.435499] [GTP-INF][goodix_ts_probe:1665] goodix_ts_probe OUT, r:0
479 + [ 6.665086] fb0: Framebuffer is not in virtual address space.
480 + [ 6.665133] fb0: Framebuffer is not in virtual address space.
481 + [ 6.701859] Console: switching to colour frame buffer device 135x146
482 + [ 6.791092] msm_dpu ae01000.display-controller: [drm] fb0: msmdrmfb frame buffer device
483 + [ 6.842786] [pmOS-rd]: Setting framebuffer mode to: U:1080x2340p-0
484 + [ 6.969645] [pmOS-rd]: Waiting for super partition /dev/sda24...
485 + [ 6.983905] [pmOS-rd]: ls: /hooks: No such file or directory
486 + [ 6.995718] [pmOS-rd]: Setup usb network
487 + [ 6.996051] configfs-gadget.g1 gadget.0: HOST MAC 3a:de:73:37:73:05
488 + [ 6.999781] [pmOS-rd]: /sys/class/android_usb does not exist, skipping android_usb
489 + [ 7.006431] configfs-gadget.g1 gadget.0: MAC c2:8a:f8:f2:cd:ed
490 + [ 7.014219] [pmOS-rd]: Setting up an USB gadget through configfs
491 + [ 7.058006] [pmOS-rd]: Starting unudhcpd with server ip 172.16.42.1, client ip: 172.16.42.2
492 + [ 7.058014] [pmOS-rd]: Using interface usb0
493 + [ 7.058017] [pmOS-rd]: Starting the DHCP daemon
494 + [ 7.058021] [pmOS-rd]: Trying to start server with parameters: Server IP addr: 172.16.42.1:67, client IP addr: 172.16.42.2, interface: usb0
495 + [ 8.046776] [pmOS-rd]: Trying to mount subpartitions for 10 seconds...
496 + [ 11.932190] [pmOS-rd]: Mount subpartitions of /dev/disk/by-partlabel/userdata
497 + [ 14.593461] [pmOS-rd]: /dev/mapper/userdata1
498 + [ 14.594962] [pmOS-rd]: Mount boot partition (/dev/mapper/userdata1) to /boot (read-only)
499 + [ 14.606273] [pmOS-rd]: Detected ext filesystem
500 + [ 14.611093] EXT4-fs (dm-6): mounting ext2 file system using the ext4 subsystem
501 + [ 14.650555] EXT4-fs (dm-6): mounted filesystem 85621b61-2735-479f-9436-015305aba4f1 ro without journal. Quota mode: none.
502 + [ 14.652387] [pmOS-rd]: Extract /boot/initramfs-extra
503 + [ 14.751927] [pmOS-rd]: 8518 blocks
504 + [ 14.754065] [pmOS-rd]: ls: /hooks-extra: No such file or directory
505 + [ 15.719321] [pmOS-rd]: /dev/mapper/userdata2
506 + [ 16.749146] [pmOS-rd]: Resize root partition (/dev/mapper/userdata2)
507 + [ 16.772667] [pmOS-rd]: Error: Partition(s) 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64 on /dev/sda32 have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes.
508 + [ 17.020113] [pmOS-rd]: Resize 'ext4' root filesystem (/dev/mapper/userdata2)
509 + [ 17.034615] [pmOS-rd]: resize2fs 1.47.1 (20-May-2024)
510 + [ 17.044999] [pmOS-rd]: Resizing the filesystem on /dev/mapper/userdata2 to 29073915 (4k) blocks.
511 + [ 17.246213] qnoc-sm7150 1500000.interconnect: sync_state() pending due to 1e40000.ipa
512 + [ 17.246234] qnoc-sm7150 1620000.interconnect: sync_state() pending due to 1e40000.ipa
513 + [ 17.246245] qnoc-sm7150 1380000.interconnect: sync_state() pending due to 1e40000.ipa
514 + [ 17.246254] qnoc-sm7150 1700000.interconnect: sync_state() pending due to 1e40000.ipa
515 + [ 17.246268] qnoc-sm7150 1380000.interconnect: sync_state() pending due to 90cd000.pmu
516 + [ 17.246279] qnoc-sm7150 9680000.interconnect: sync_state() pending due to 90b6300.pmu
517 + [ 17.246288] qnoc-sm7150 9680000.interconnect: sync_state() pending due to 1e40000.ipa
518 + [ 17.246321] qcom-rpmhpd 18200000.rsc:power-controller: sync_state() pending due to 4080000.remoteproc
519 + [ 17.246331] qcom-rpmhpd 18200000.rsc:power-controller: sync_state() pending due to 8300000.remoteproc
520 + [ 17.246341] qcom-rpmhpd 18200000.rsc:power-controller: sync_state() pending due to 62400000.remoteproc
521 + [ 25.779711] [pmOS-rd]: The filesystem on /dev/mapper/userdata2 is now 29073915 (4k) blocks long.
522 + [ 25.906419] [pmOS-rd]: Auto-repair and check 'ext' filesystem (/dev/mapper/userdata2)
523 + [ 25.922751] [pmOS-rd]: pmOS_root: clean, 22200/5228544 files, 763092/29073915 blocks
524 + [ 26.070081] [pmOS-rd]: Mount root partition (/dev/mapper/userdata2) to /sysroot (read-write) with options defaults
525 + [ 26.091356] [pmOS-rd]: Detected ext4 filesystem
526 + [ 26.149542] EXT4-fs (dm-7): mounted filesystem ce7e1c51-21ae-41fc-a204-cf7652b0ffe2 r/w with ordered data mode. Quota mode: none.
527 + [ 26.169574] EXT4-fs (dm-6): unmounting filesystem 85621b61-2735-479f-9436-015305aba4f1.
528 + [ 26.225096] [pmOS-rd]: Auto-repair and check 'ext' filesystem (/dev/mapper/userdata1)
529 + [ 26.231294] [pmOS-rd]: pmOS_boot: clean, 293/60416 files, 18287/60416 blocks
530 + [ 26.371180] [pmOS-rd]: Mount boot partition (/dev/mapper/userdata1) to /sysroot/boot (read-write)
531 + [ 26.389564] [pmOS-rd]: Detected ext filesystem
532 + [ 26.399188] EXT4-fs (dm-6): mounting ext2 file system using the ext4 subsystem
533 + [ 26.418679] EXT4-fs (dm-6): mounted filesystem 85621b61-2735-479f-9436-015305aba4f1 r/w without journal. Quota mode: none.
534 + [ 26.447002] [pmOS-rd]: Switching root
535 + [ 26.603773] syslogd exiting
536 + [ 27.785882] udevd[897]: starting version 3.2.14
537 + [ 27.835118] udevd[897]: starting eudev-3.2.14
538 + [ 27.949080] cfg80211: Loading compiled-in X.509 certificates for regulatory database
539 + [ 27.951065] i2c-qcom-cci ac4a000.cci: Found 19200000 cci clk rate while 37500000 was expected
540 + [ 27.958302] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
541 + [ 27.958882] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
542 + [ 27.959543] ipa 1e40000.ipa: Adding to iommu group 9
543 + [ 27.965966] remoteproc remoteproc0: 62400000.remoteproc is available
544 + [ 27.970039] platform ace0000.camss: Fixed dependency cycle(s) with /soc@0/cci@ac4a000/i2c-bus@1/camera@36
545 + [ 27.970283] i2c 13-0036: Fixed dependency cycle(s) with /soc@0/camss@ace0000
546 + [ 27.975215] remoteproc remoteproc1: 8300000.remoteproc is available
547 + [ 27.977040] ipa 1e40000.ipa: IPA driver initialized
548 + [ 27.979781] i2c-qcom-cci ac4b000.cci: Found 19200000 cci clk rate while 37500000 was expected
549 + [ 27.980183] platform ace0000.camss: Fixed dependency cycle(s) with /soc@0/cci@ac4b000/i2c-bus@0/camera@10
550 + [ 27.980330] i2c 14-0010: Fixed dependency cycle(s) with /soc@0/camss@ace0000
551 + [ 27.980458] tfa987x 4-0034: Chip revision: 0x0c74
552 + [ 27.982399] remoteproc remoteproc2: 4080000.remoteproc is available
553 + [ 28.016125] ipa 1e40000.ipa: IPA driver setup completed successfully
554 + [ 28.018773] remoteproc remoteproc1: powering up 8300000.remoteproc
555 + [ 28.018790] remoteproc remoteproc1: Booting fw image qcom/sm7150/davinci/cdsp.mbn, size 2905620
556 + [ 28.045224] input: pm8xxx_vib_ffmemless as /devices/platform/soc@0/c440000.spmi/spmi-0/0-01/c440000.spmi:pmic@1:vibrator@5300/input/input4
557 + [ 28.065677] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6000: registered as rtc0
558 + [ 28.065759] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6000: setting system clock to 1970-08-29T07:37:31 UTC (20763451)
559 + [ 28.069743] remoteproc remoteproc1: remote processor 8300000.remoteproc is now up
560 + [ 28.077022] ath10k_snoc 18800000.wifi: Adding to iommu group 10
561 + [ 28.089127] remoteproc remoteproc0: powering up 62400000.remoteproc
562 + [ 28.089144] remoteproc remoteproc0: Booting fw image qcom/sm7150/davinci/adsp.mbn, size 18418908
563 + [ 28.099538] Bluetooth: Core ver 2.22
564 + [ 28.099619] NET: Registered PF_BLUETOOTH protocol family
565 + [ 28.099621] Bluetooth: HCI device and connection manager initialized
566 + [ 28.099635] Bluetooth: HCI socket layer initialized
567 + [ 28.099641] Bluetooth: L2CAP socket layer initialized
568 + [ 28.099654] Bluetooth: SCO socket layer initialized
569 + [ 28.117856] Bluetooth: HCI UART driver ver 2.3
570 + [ 28.117868] Bluetooth: HCI UART protocol H4 registered
571 + [ 28.117920] Bluetooth: HCI UART protocol LL registered
572 + [ 28.118174] Bluetooth: HCI UART protocol Broadcom registered
573 + [ 28.118186] Bluetooth: HCI UART protocol QCA registered
574 + [ 28.118192] Bluetooth: HCI UART protocol Marvell registered
575 + [ 28.123559] Bluetooth: hci0: setting up wcn399x
576 + [ 28.231385] remoteproc remoteproc0: remote processor 62400000.remoteproc is now up
577 + [ 28.295553] mc: Linux media interface: v0.10
578 + [ 28.303726] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:3
579 + [ 28.303798] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:4
580 + [ 28.304633] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:7
581 + [ 28.305012] videodev: Linux video capture interface: v2.00
582 + [ 28.307358] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:8
583 + [ 28.313993] qcom,fastrpc 8300000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
584 + [ 28.328424] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@1: Adding to iommu group 11
585 + [ 28.329313] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@2: Adding to iommu group 12
586 + [ 28.330399] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 13
587 + [ 28.331743] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 14
588 + [ 28.333966] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 15
589 + [ 28.335561] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 16
590 + [ 28.336006] qcom,fastrpc 62400000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
591 + [ 28.337238] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 17
592 + [ 28.338586] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 18
593 + [ 28.340012] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 19
594 + [ 28.340950] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 20
595 + [ 28.342046] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 21
596 + [ 28.343131] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@8: Adding to iommu group 22
597 + [ 28.363204] q6asm-dai 62400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 23
598 + [ 28.390938] input: Xiaomi Mi 9T Headset Jack as /devices/platform/soc@0/soc@0:sound/sound/card0/input5
599 + [ 28.486936] Bluetooth: hci0: QCA Product ID :0x0000000a
600 + [ 28.486949] Bluetooth: hci0: QCA SOC Version :0x40020140
601 + [ 28.486953] Bluetooth: hci0: QCA ROM Version :0x00000201
602 + [ 28.486957] Bluetooth: hci0: QCA Patch Version:0x00000001
603 + [ 28.494308] Bluetooth: hci0: QCA controller version 0x01400201
604 + [ 28.494315] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
605 + [ 28.549227] fuse: init (API version 7.40)
606 + [ 28.585196] NET: Registered PF_INET6 protocol family
607 + [ 28.586058] Segment Routing with IPv6
608 + [ 28.586084] In-situ OAM (IOAM) with IPv6
609 + [ 29.322200] Bluetooth: hci0: QCA Downloading qca/crnv21.bin
610 + [ 29.474726] Bluetooth: hci0: QCA setup on UART is completed
611 + [ 30.674946] EXT4-fs (dm-7): re-mounted ce7e1c51-21ae-41fc-a204-cf7652b0ffe2 r/w. Quota mode: none.
612 + [ 30.727241] EXT4-fs (dm-6): re-mounted 85621b61-2735-479f-9436-015305aba4f1 r/w. Quota mode: none.
613 + [ 31.257252] remoteproc remoteproc2: powering up 4080000.remoteproc
614 + [ 31.463974] remoteproc remoteproc2: Booting fw image qcom/sm7150/davinci/modem.mbn, size 61722832
615 + [ 31.464881] ipa 1e40000.ipa: received modem starting event
616 + [ 31.641930] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
617 + [ 31.641974] Bluetooth: BNEP filters: protocol multicast
618 + [ 31.641989] Bluetooth: BNEP socket layer initialized
619 + [ 31.790369] ipa 1e40000.ipa: received modem running event
620 + [ 31.790377] remoteproc remoteproc2: remote processor 4080000.remoteproc is now up
621 + [ 32.953849] ath10k_snoc 18800000.wifi: qmi chip_id 0x140 chip_family 0x4002 board_id 0xff soc_id 0x40090000
622 + [ 32.953870] ath10k_snoc 18800000.wifi: qmi fw_version 0x301b006d fw_build_timestamp 2021-04-22 23:20 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.0.1.c3-00109-QCAHLSWMTPLZ-1.389938.1.393565.1
623 + [ 36.859566] ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
624 + [ 36.859595] ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
625 + [ 36.859609] ath10k_snoc 18800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
626 + [ 36.887179] ath10k_snoc 18800000.wifi: htt-ver 3.61 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
627 + [ 36.974423] ath10k_snoc 18800000.wifi: invalid MAC address; choosing random
628 + [ 36.974622] ath: EEPROM regdomain: 0x406c
629 + [ 36.974628] ath: EEPROM indicates we should expect a direct regpair map
630 + [ 36.974637] ath: Country alpha2 being used: 00
631 + [ 36.974641] ath: Regpair used: 0x6c
632 + [ 39.129602] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
633 + [ 43.091582] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
634 + [ 44.261167] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
635 + [ 48.240234] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
636 + [ 49.386727] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
637 + [ 50.507054] zram: Added device: zram0
638 + [ 50.548749] zram0: detected capacity change from 0 to 5638144
639 + [ 50.602720] Adding 2819068k swap on /dev/zram0. Priority:16383 extents:1 across:2819068k SSDsc
640 + [ 53.360373] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
641 + [ 55.598860] rfkill: input handler disabled
642 + [ 56.024368] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
643 + [ 59.990223] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
644 + [ 65.027140] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
645 + [ 68.990938] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
646 + [ 72.820366] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
647 + [ 74.233861] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
648 + [ 78.199037] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
649 + [ 79.614217] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
650 + [ 83.577940] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
651 + [ 83.593071] wlan0: regulatory prevented using AP config, downgraded
652 + [ 83.765334] wlan0: authenticate with 48:5d:35:8a:53:9e (local address=d2:c1:ed:83:b4:4a)
653 + [ 83.765374] wlan0: send auth to 48:5d:35:8a:53:9e (try 1/3)
654 + [ 83.772317] wlan0: authenticated
655 + [ 83.778913] wlan0: associate with 48:5d:35:8a:53:9e (try 1/3)
656 + [ 83.789542] wlan0: RX AssocResp from 48:5d:35:8a:53:9e (capab=0x1511 status=0 aid=2)
657 + [ 83.862531] wlan0: associated
658 + [ 83.862775] ath: EEPROM regdomain: 0x8114
659 + [ 83.862784] ath: EEPROM indicates we should expect a country code
660 + [ 83.862788] ath: doing EEPROM country->regdmn map search
661 + [ 83.862792] ath: country maps to regdmn code: 0x37
662 + [ 83.862796] ath: Country alpha2 being used: DE
663 + [ 83.862800] ath: Regpair used: 0x37
664 + [ 83.862804] ath: regdomain 0x8114 dynamically updated by country element
665 + [ 83.870895] wlan0: Limiting TX power to 20 (23 - 3) dBm as advertised by 48:5d:35:8a:53:9e
666 + [ 88.550713] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
667 + [ 93.981837] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
668 + [ 98.792519] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
669 + [ 104.224327] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
670 + [ 131.486408] [drm:dpu_crtc_get_scanout_position] *ERROR* no encoder found for crtc 0
671 + [ 200.278344] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
672 + [ 205.604214] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
673 + [ 217.774955] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
674 + [ 223.405561] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
675 + [ 241.739667] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
676 + [ 247.195222] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
677 + [ 259.877477] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
678 + [ 265.315396] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
679 + [ 297.039410] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
680 + [ 302.373059] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
681 + [ 334.102640] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
682 + [ 339.430988] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
683 + [ 371.178283] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
684 + [ 376.508475] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
685 + [ 408.270273] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
686 + [ 413.783383] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
687 + [ 418.998966] [drm:dpu_format_populate_layout] *ERROR* failed to retrieve base addr
688 + [ 418.999022] [drm:dpu_plane_sspp_atomic_update:1126] [dpu error]plane40 failed to get format layout, -14
689 + [ 455.347323] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
690 + [ 460.689497] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
691 + [ 463.965726] ath10k_snoc 18800000.wifi: failed to install key for vdev 0 peer 48:5d:35:8a:53:9e: -110
692 + [ 463.965770] wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-110)
693 + [ 467.038936] ath10k_snoc 18800000.wifi: failed to install key for vdev 0 peer 48:5d:35:8a:53:9e: -110
694 + [ 467.038987] wlan0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-110)
695 + [ 467.062591] wlan0: disconnect from AP 48:5d:35:8a:53:9e for new auth to 48:5d:35:8a:53:9d
696 + [ 470.365834] ath10k_snoc 18800000.wifi: failed to install key for vdev 0 peer 48:5d:35:8a:53:9e: -110
697 + [ 470.365883] wlan0: failed to remove key (0, 48:5d:35:8a:53:9e) from hardware (-110)
698 + [ 470.642577] wlan0: authenticate with 48:5d:35:8a:53:9d (local address=d2:c1:ed:83:b4:4a)
699 + [ 470.642623] wlan0: send auth to 48:5d:35:8a:53:9d (try 1/3)
700 + [ 470.664972] wlan0: send auth to 48:5d:35:8a:53:9d (try 2/3)
701 + [ 470.675541] wlan0: send auth to 48:5d:35:8a:53:9d (try 3/3)
702 + [ 470.685934] wlan0: authentication with 48:5d:35:8a:53:9d timed out
703 + [ 470.916037] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
704 + [ 471.071762] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
705 + [ 471.096558] wlan0: regulatory prevented using AP config, downgraded
706 + [ 471.120576] wlan0: authenticate with 48:5d:35:8a:53:9e (local address=d2:c1:ed:83:b4:4a)
707 + [ 471.120603] wlan0: send auth to 48:5d:35:8a:53:9e (try 1/3)
708 + [ 471.229831] wlan0: send auth to 48:5d:35:8a:53:9e (try 2/3)
709 + [ 471.234202] wlan0: authenticated
710 + [ 471.238218] wlan0: associate with 48:5d:35:8a:53:9e (try 1/3)
711 + [ 471.246842] wlan0: associate with 48:5d:35:8a:53:9e (try 2/3)
712 + [ 471.256013] wlan0: associate with 48:5d:35:8a:53:9e (try 3/3)
713 + [ 471.264585] wlan0: association with 48:5d:35:8a:53:9e timed out
714 + [ 471.895262] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
715 + [ 472.051186] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
716 + [ 472.244892] wlan0: authenticate with 18:d6:c7:50:bf:8a (local address=d2:c1:ed:83:b4:4a)
717 + [ 472.244941] wlan0: send auth to 18:d6:c7:50:bf:8a (try 1/3)
718 + [ 472.259763] wlan0: send auth to 18:d6:c7:50:bf:8a (try 2/3)
719 + [ 472.270343] wlan0: send auth to 18:d6:c7:50:bf:8a (try 3/3)
720 + [ 472.280424] wlan0: authentication with 18:d6:c7:50:bf:8a timed out
721 + [ 473.425059] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
722 + [ 473.580972] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
723 + [ 473.770167] wlan0: authenticate with 98:9b:cb:5c:2f:91 (local address=d2:c1:ed:83:b4:4a)
724 + [ 473.770214] wlan0: send auth to 98:9b:cb:5c:2f:91 (try 1/3)
725 + [ 473.783886] wlan0: send auth to 98:9b:cb:5c:2f:91 (try 2/3)
726 + [ 473.794561] wlan0: send auth to 98:9b:cb:5c:2f:91 (try 3/3)
727 + [ 473.805045] wlan0: authentication with 98:9b:cb:5c:2f:91 timed out
728 + [ 478.912314] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
729 + [ 479.068478] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
730 + [ 484.981384] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
731 + [ 486.159975] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
732 + [ 486.281498] IPv6: ipv6_create_tempaddr: regeneration time exceeded - disabled temporary address support
733 + [ 487.199651] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
734 + [ 491.166872] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
735 + [ 492.073216] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
736 + [ 496.039742] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
737 + [ 496.424453] wlan0: authenticate with 48:5d:35:8a:53:9d (local address=d2:c1:ed:83:b4:4a)
738 + [ 496.424500] wlan0: send auth to 48:5d:35:8a:53:9d (try 1/3)
739 + [ 496.435324] wlan0: send auth to 48:5d:35:8a:53:9d (try 2/3)
740 + [ 496.445804] wlan0: send auth to 48:5d:35:8a:53:9d (try 3/3)
741 + [ 496.456125] wlan0: authentication with 48:5d:35:8a:53:9d timed out
742 + [ 506.602233] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
743 + [ 506.758498] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
744 + [ 506.797054] wlan0: authenticate with 48:5d:35:8a:53:9d (local address=d2:c1:ed:83:b4:4a)
745 + [ 506.797084] wlan0: send auth to 48:5d:35:8a:53:9d (try 1/3)
746 + [ 506.801814] wlan0: authenticated
747 + [ 506.809145] wlan0: associate with 48:5d:35:8a:53:9d (try 1/3)
748 + [ 506.824915] wlan0: RX AssocResp from 48:5d:35:8a:53:9d (capab=0x1431 status=0 aid=3)
749 + [ 506.899115] wlan0: associated
750 + [ 506.899806] ath: EEPROM regdomain: 0x8114
751 + [ 506.899822] ath: EEPROM indicates we should expect a country code
752 + [ 506.899830] ath: doing EEPROM country->regdmn map search
753 + [ 506.899838] ath: country maps to regdmn code: 0x37
754 + [ 506.899846] ath: Country alpha2 being used: DE
755 + [ 506.899854] ath: Regpair used: 0x37
756 + [ 506.899863] ath: regdomain 0x8114 dynamically updated by country element
757 + [ 506.910844] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 48:5d:35:8a:53:9d
758 + [ 679.662560] wlan0: AP 48:5d:35:8a:53:9d changed bandwidth, new used config is 2462.000 MHz, width 1 (2462.000/0 MHz)
759 + [ 809.074844] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
760 + [ 810.797514] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
761 + [ 816.237064] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
Newer Older

Powered by Opengist ⋅ Load: 82ms⋅

English
⋅ Forgejo