Adrian / gist:1134ed2cb9514079bb0c3ab799a0c64e

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51df805e] [ 0.000000] Linux version 6.14.0-rc5-sm7150 (pmos@karma) (aarch64-alpine-linux-musl-gcc (Alpine 14.2.0) 14.2.0, GNU ld (GNU Binutils) 2.42) #19 SMP PREEMPT Fri Mar 7 22:31:03 UTC 2025 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Xiaomi Mi 9T [ 0.000000] efi: EFI v2.11 by Das U-Boot [ 0.000000] efi: ESRT=0x1eb878040 RTPROP=0x1eb87a040 SMBIOS 3.0=0x1eca0c000 INITRD=0x1eb861040 MEMRESERVE=0x1eb826040 [ 0.000000] esrt: Reserving ESRT space from 0x00000001eb878040 to 0x00000001eb878078. [ 0.000000] OF: reserved mem: 0x0000000085700000..0x0000000085cfffff (6144 KiB) nomap non-reusable hypervisor@85700000 [ 0.000000] OF: reserved mem: 0x0000000085d00000..0x0000000085efffff (2048 KiB) nomap non-reusable xbl@85d00000 [ 0.000000] OF: reserved mem: 0x0000000085f00000..0x0000000085f1ffff (128 KiB) nomap non-reusable aop@85f00000 [ 0.000000] OF: reserved mem: 0x0000000085f20000..0x0000000085f3ffff (128 KiB) nomap non-reusable aop-cmd-db@85f20000 [ 0.000000] OF: reserved mem: 0x0000000085fff000..0x0000000085ffffff (4 KiB) nomap non-reusable sec-apps@85fff000 [ 0.000000] OF: reserved mem: 0x0000000086000000..0x00000000861fffff (2048 KiB) nomap non-reusable smem@86000000 [ 0.000000] OF: reserved mem: 0x0000000086200000..0x000000008aafffff (74752 KiB) nomap non-reusable trust-zone@86200000 [ 0.000000] OF: reserved mem: 0x000000008ab00000..0x000000008affffff (5120 KiB) nomap non-reusable camera@8ab00000 [ 0.000000] OF: reserved mem: 0x000000008b000000..0x00000000933fffff (135168 KiB) nomap non-reusable mpss@8b000000 [ 0.000000] OF: reserved mem: 0x0000000093400000..0x00000000938fffff (5120 KiB) nomap non-reusable venus@93400000 [ 0.000000] OF: reserved mem: 0x0000000093900000..0x00000000956fffff (30720 KiB) nomap non-reusable cdsp@93900000 [ 0.000000] OF: reserved mem: 0x0000000095700000..0x0000000097cfffff (38912 KiB) nomap non-reusable adsp@95700000 [ 0.000000] OF: reserved mem: 0x000000009e400000..0x000000009f7fffff (20480 KiB) nomap non-reusable qseecom@9e400000 [ 0.000000] OF: reserved mem: 0x000000009f800000..0x00000000a15fffff (30720 KiB) nomap non-reusable sec-cdsp@9f800000 [ 0.000000] OF: reserved mem: 0x000000009d700000..0x000000009d7fffff (1024 KiB) nomap non-reusable dfps-data@9e300000 [ 0.000000] OF: reserved mem: 0x000000009c000000..0x000000009c9a3f7f (9871 KiB) nomap non-reusable splash_region@9c000000 [ 0.000000] OF: reserved mem: 0x000000009d800000..0x000000009dbfffff (4096 KiB) map non-reusable ramoops@9d800000 [ 0.000000] OF: reserved mem: 0x00000000af000000..0x00000000afffffff (16384 KiB) nomap non-reusable ramdump_fb_region@af000000 [ 0.000000] OF: reserved mem: 0x0000000097d00000..0x0000000097e7ffff (1536 KiB) nomap non-reusable wlan_msa@97d00000 [ 0.000000] OF: reserved mem: 0x0000000097e80000..0x0000000097efffff (512 KiB) nomap non-reusable npu@97e80000 [ 0.000000] OF: reserved mem: 0x0000000097f00000..0x0000000097f0ffff (64 KiB) nomap non-reusable ipa_fw@97f00000 [ 0.000000] OF: reserved mem: 0x0000000097f10000..0x0000000097f14fff (20 KiB) nomap non-reusable ipa_gsi@97f10000 [ 0.000000] OF: reserved mem: 0x0000000097f15000..0x0000000097f16fff (8 KiB) nomap non-reusable gpu@97f15000 [ 0.000000] OF: reserved mem: 0x00000000f2e01000..0x00000000f3400fff (6144 KiB) nomap non-reusable rmtfs@f2e01000 [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000001fcbfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x1fc023040-0x1fc025dff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000001fcbfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000856fffff] [ 0.000000] node 0: [mem 0x0000000085700000-0x0000000085f3ffff] [ 0.000000] node 0: [mem 0x0000000085f40000-0x0000000085ffefff] [ 0.000000] node 0: [mem 0x0000000085fff000-0x0000000097f16fff] [ 0.000000] node 0: [mem 0x0000000097f17000-0x000000009bffffff] [ 0.000000] node 0: [mem 0x000000009c000000-0x000000009c9a3fff] [ 0.000000] node 0: [mem 0x000000009c9a4000-0x000000009d6fffff] [ 0.000000] node 0: [mem 0x000000009d700000-0x000000009d7fffff] [ 0.000000] node 0: [mem 0x000000009d800000-0x000000009e3fffff] [ 0.000000] node 0: [mem 0x000000009e400000-0x00000000a15fffff] [ 0.000000] node 0: [mem 0x00000000a1600000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af000000-0x00000000afffffff] [ 0.000000] node 0: [mem 0x00000000b0000000-0x00000000f2e00fff] [ 0.000000] node 0: [mem 0x00000000f2e01000-0x00000000f3400fff] [ 0.000000] node 0: [mem 0x00000000f3401000-0x00000001eb879fff] [ 0.000000] node 0: [mem 0x00000001eb87a000-0x00000001eb87afff] [ 0.000000] node 0: [mem 0x00000001eb87b000-0x00000001eb87dfff] [ 0.000000] node 0: [mem 0x00000001eb87e000-0x00000001eb89ffff] [ 0.000000] node 0: [mem 0x00000001eb8a0000-0x00000001eca0bfff] [ 0.000000] node 0: [mem 0x00000001eca0c000-0x00000001eca0cfff] [ 0.000000] node 0: [mem 0x00000001eca0d000-0x00000001fc99ffff] [ 0.000000] node 0: [mem 0x00000001fc9a0000-0x00000001fc9affff] [ 0.000000] node 0: [mem 0x00000001fc9b0000-0x00000001fcbfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000001fcbfffff] [ 0.000000] On node 0, zone Normal: 13312 pages in unavailable ranges [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] psci: OSI mode supported. [ 0.000000] psci: [Firmware Bug]: failed to set PC mode: -3 [ 0.000000] percpu: Embedded 32 pages/cpu s91736 r8192 d31144 u131072 [ 0.000000] pcpu-alloc: s91736 r8192 d31144 u131072 alloc=32*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: initrd=initramfs quiet loglevel=2 pmos_boot_uuid=E150-D080 pmos_root_uuid=14b31106-1453-4ee4-842b-f85813c29ed0 pmos_rootfsopts=defaults [ 0.000000] Unknown kernel command line parameters "pmos_boot_uuid=E150-D080 pmos_root_uuid=14b31106-1453-4ee4-842b-f85813c29ed0 pmos_rootfsopts=defaults", will be passed to user space. [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1559552 [ 0.000000] Policy zone: Normal [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 8. [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 61819 entries in 242 pages [ 0.000000] ftrace: allocated 242 pages with 5 groups [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.000000] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.000000] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: 928 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=1 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000 [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000208] Console: colour dummy device 80x25 [ 0.000218] printk: legacy console [tty0] enabled [ 0.000367] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=19200) [ 0.000380] pid_max: default: 32768 minimum: 301 [ 0.000431] LSM: initializing lsm=capability [ 0.000560] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000581] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003425] rcu: Hierarchical SRCU implementation. [ 0.003435] rcu: Max phase no-delay instances is 400. [ 0.004130] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.005858] Remapping and enabling EFI services. [ 0.006207] smp: Bringing up secondary CPUs ... [ 0.009038] Detected VIPT I-cache on CPU1 [ 0.009116] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000 [ 0.009171] CPU1: Booted secondary processor 0x0000000100 [0x51df805e] [ 0.010882] Detected VIPT I-cache on CPU2 [ 0.010944] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000 [ 0.010985] CPU2: Booted secondary processor 0x0000000200 [0x51df805e] [ 0.013093] Detected VIPT I-cache on CPU3 [ 0.013146] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000 [ 0.013185] CPU3: Booted secondary processor 0x0000000300 [0x51df805e] [ 0.017086] Detected VIPT I-cache on CPU4 [ 0.017142] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000 [ 0.017180] CPU4: Booted secondary processor 0x0000000400 [0x51df805e] [ 0.019183] Detected VIPT I-cache on CPU5 [ 0.019242] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000 [ 0.019279] CPU5: Booted secondary processor 0x0000000500 [0x51df805e] [ 0.022160] CPU features: detected: Spectre-v2 [ 0.022210] CPU features: detected: Kernel page table isolation (KPTI) [ 0.022228] CPU features: detected: ARM erratum 1418040 [ 0.022241] Detected PIPT I-cache on CPU6 [ 0.022376] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000 [ 0.022406] arch_timer: Enabling local workaround for ARM erratum 1418040 [ 0.022446] CPU6: Booted secondary processor 0x0000000600 [0x51df804e] [ 0.026784] Detected PIPT I-cache on CPU7 [ 0.026944] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000 [ 0.026975] arch_timer: Enabling local workaround for ARM erratum 1418040 [ 0.027018] CPU7: Booted secondary processor 0x0000000700 [0x51df804e] [ 0.027256] smp: Brought up 1 node, 8 CPUs [ 0.027279] SMP: Total of 8 processors activated. [ 0.027283] CPU: All CPU(s) started at EL1 [ 0.027288] CPU features: detected: 32-bit EL0 Support [ 0.027292] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.027297] CPU features: detected: Common not Private translations [ 0.027301] CPU features: detected: CRC32 instructions [ 0.027309] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.027313] CPU features: detected: LSE atomic instructions [ 0.027317] CPU features: detected: Privileged Access Never [ 0.027321] CPU features: detected: RAS Extension Support [ 0.027419] alternatives: applying system-wide alternatives [ 0.030744] CPU features: detected: Hardware dirty bit management on CPU6-7 [ 0.040468] Memory: 5563176K/6238208K available (20352K kernel code, 3588K rwdata, 7944K rodata, 7680K init, 668K bss, 632344K reserved, 32768K cma-reserved) [ 0.042348] devtmpfs: initialized [ 0.063762] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.063794] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.064761] 22656 pages in range for non-PLT usage [ 0.064773] 514176 pages in range for PLT usage [ 0.065144] pinctrl core: initialized pinctrl subsystem [ 0.065860] SMBIOS 3.7.0 present. [ 0.065894] DMI: xiaomi Xiaomi Mi 9T/Xiaomi Mi 9T, BIOS 2025.04-rc1-gd7eb8c986020-dirty 04/01/2025 [ 0.065920] DMI: Memory slots populated: 0/0 [ 0.070452] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.071654] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.071986] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.072508] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.072567] audit: initializing netlink subsys (disabled) [ 0.072745] audit: type=2000 audit(0.061:1): state=initialized audit_enabled=0 res=1 [ 0.073272] thermal_sys: Registered thermal governor 'step_wise' [ 0.073284] thermal_sys: Registered thermal governor 'power_allocator' [ 0.073413] cpuidle: using governor menu [ 0.073543] NET: Registered PF_QIPCRTR protocol family [ 0.073793] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.074045] ASID allocator initialised with 32768 entries [ 0.074497] Serial: AMBA PL011 UART driver [ 0.076384] pstore: Using crash dump compression: deflate [ 0.076403] printk: legacy console [ramoops-1] enabled [ 0.076902] pstore: Registered ramoops as persistent store backend [ 0.076913] ramoops: using 0x400000@0x9d800000, ecc: 0 [ 0.080186] CPUidle PSCI: Initialized CPU PM domain topology using OSI mode [ 0.098822] /soc@0/ufshc@1d84000: Fixed dependency cycle(s) with /soc@0/phy@1d87000 [ 0.098896] /soc@0/phy@1d87000: Fixed dependency cycle(s) with /soc@0/ufshc@1d84000 [ 0.099276] /soc@0/usb@a6f8800/usb@a600000: Fixed dependency cycle(s) with /soc@0/spmi@c440000/pmic@0/typec@1500/connector [ 0.099389] /soc@0/cci@ac4a000/i2c-bus@1/camera@36: Fixed dependency cycle(s) with /soc@0/camss@ace0000 [ 0.099493] /soc@0/cci@ac4b000/i2c-bus@0/camera@10: Fixed dependency cycle(s) with /soc@0/camss@ace0000 [ 0.099574] /soc@0/camss@ace0000: Fixed dependency cycle(s) with /soc@0/cci@ac4a000/i2c-bus@1/camera@36 [ 0.099618] /soc@0/camss@ace0000: Fixed dependency cycle(s) with /soc@0/cci@ac4b000/i2c-bus@0/camera@10 [ 0.099772] /soc@0/display-subsystem@ae00000/display-controller@ae01000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000 [ 0.099880] /soc@0/display-subsystem@ae00000/dsi@ae94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0 [ 0.099954] /soc@0/display-subsystem@ae00000/dsi@ae94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/display-controller@ae01000 [ 0.100144] /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000 [ 0.100212] /soc@0/display-subsystem@ae00000/phy@ae94400: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000 [ 0.100250] /soc@0/clock-controller@af00000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/phy@ae94400 [ 0.100340] /soc@0/spmi@c440000/pmic@0/typec@1500/connector: Fixed dependency cycle(s) with /soc@0/usb@a6f8800/usb@a600000 [ 0.100454] /soc@0/interrupt-controller@17a00000: Fixed dependency cycle(s) with /soc@0/interrupt-controller@17a00000 [ 0.105004] /soc@0/ufshc@1d84000: Fixed dependency cycle(s) with /soc@0/phy@1d87000 [ 0.105508] /soc@0/ufshc@1d84000: Fixed dependency cycle(s) with /soc@0/phy@1d87000 [ 0.105608] /soc@0/phy@1d87000: Fixed dependency cycle(s) with /soc@0/ufshc@1d84000 [ 0.112899] /soc@0/usb@a6f8800/usb@a600000: Fixed dependency cycle(s) with /soc@0/spmi@c440000/pmic@0/typec@1500/connector [ 0.113331] /soc@0/cci@ac4a000/i2c-bus@1/camera@36: Fixed dependency cycle(s) with /soc@0/camss@ace0000 [ 0.113684] /soc@0/cci@ac4b000/i2c-bus@0/camera@10: Fixed dependency cycle(s) with /soc@0/camss@ace0000 [ 0.114406] /soc@0/cci@ac4b000/i2c-bus@0/camera@10: Fixed dependency cycle(s) with /soc@0/camss@ace0000 [ 0.114528] /soc@0/cci@ac4a000/i2c-bus@1/camera@36: Fixed dependency cycle(s) with /soc@0/camss@ace0000 [ 0.114642] /soc@0/camss@ace0000: Fixed dependency cycle(s) with /soc@0/cci@ac4a000/i2c-bus@1/camera@36 [ 0.114701] /soc@0/camss@ace0000: Fixed dependency cycle(s) with /soc@0/cci@ac4b000/i2c-bus@0/camera@10 [ 0.115729] /soc@0/display-subsystem@ae00000: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000 [ 0.115871] /soc@0/display-subsystem@ae00000/display-controller@ae01000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000 [ 0.115986] /soc@0/display-subsystem@ae00000/dsi@ae94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0 [ 0.116092] /soc@0/display-subsystem@ae00000/dsi@ae94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/display-controller@ae01000 [ 0.116336] /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000 [ 0.116404] /soc@0/display-subsystem@ae00000/phy@ae94400: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000 [ 0.116637] /soc@0/display-subsystem@ae00000/phy@ae94400: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000 [ 0.116767] /soc@0/display-subsystem@ae00000: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000 [ 0.116803] /soc@0/clock-controller@af00000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/phy@ae94400 [ 0.118579] /soc@0/spmi@c440000/pmic@0/typec@1500/connector: Fixed dependency cycle(s) with /soc@0/usb@a6f8800/usb@a600000 [ 0.128283] /soc@0/rsc@18200000/regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps5 [ 0.128335] /soc@0/rsc@18200000/regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps4 [ 0.128623] /soc@0/rsc@18200000/regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-1/bob [ 0.128657] /soc@0/rsc@18200000/regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-1/smps8 [ 0.133395] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.133418] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.133432] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.133442] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.133453] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.133461] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.133491] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.133498] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.152529] raid6: neonx8 gen() 1586 MB/s [ 0.169614] raid6: neonx4 gen() 1590 MB/s [ 0.186702] raid6: neonx2 gen() 1331 MB/s [ 0.203784] raid6: neonx1 gen() 1054 MB/s [ 0.220871] raid6: int64x8 gen() 697 MB/s [ 0.237919] raid6: int64x4 gen() 738 MB/s [ 0.254999] raid6: int64x2 gen() 615 MB/s [ 0.272035] raid6: int64x1 gen() 509 MB/s [ 0.272043] raid6: using algorithm neonx4 gen() 1590 MB/s [ 0.289089] raid6: .... xor() 1242 MB/s, rmw enabled [ 0.289099] raid6: using neon recovery algorithm [ 0.294087] iommu: Default domain type: Translated [ 0.294105] iommu: DMA domain TLB invalidation policy: strict mode [ 0.295555] SCSI subsystem initialized [ 0.295770] usbcore: registered new interface driver usbfs [ 0.295808] usbcore: registered new interface driver hub [ 0.295851] usbcore: registered new device driver usb [ 0.296043] pps_core: LinuxPPS API ver. 1 registered [ 0.296051] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.296070] PTP clock support registered [ 0.296124] EDAC MC: Ver: 3.0.0 [ 0.296555] scmi_core: SCMI protocol bus registered [ 0.296644] efivars: Registered efivars operations [ 0.297688] Advanced Linux Sound Architecture Driver Initialized. [ 0.299081] vgaarb: loaded [ 0.299459] clocksource: Switched to clocksource arch_sys_counter [ 0.299982] VFS: Disk quotas dquot_6.6.0 [ 0.300016] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.309187] NET: Registered PF_INET protocol family [ 0.309616] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.321925] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.322055] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.322081] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.322637] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.323820] TCP: Hash tables configured (established 65536 bind 65536) [ 0.323938] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.324149] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.324504] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.324976] RPC: Registered named UNIX socket transport module. [ 0.324990] RPC: Registered udp transport module. [ 0.324998] RPC: Registered tcp transport module. [ 0.325004] RPC: Registered tcp-with-tls transport module. [ 0.325012] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.326438] PCI: CLS 0 bytes, default 64 [ 0.326647] Trying to unpack rootfs image as initramfs... [ 0.332208] Initialise system trusted keyrings [ 0.332482] workingset: timestamp_bits=42 max_order=21 bucket_order=0 [ 0.332889] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.333199] NFS: Registering the id_resolver key type [ 0.333235] Key type id_resolver registered [ 0.333244] Key type id_legacy registered [ 0.333278] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.333298] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.334274] Key type cifs.idmap registered [ 0.420275] NET: Registered PF_ALG protocol family [ 0.420300] xor: measuring software checksum speed [ 0.421850] 8regs : 2126 MB/sec [ 0.423391] 32regs : 2148 MB/sec [ 0.424408] arm64_neon : 3258 MB/sec [ 0.424417] xor: using function: arm64_neon (3258 MB/sec) [ 0.424430] async_tx: api initialized (async) [ 0.424440] Key type asymmetric registered [ 0.424460] Asymmetric key parser 'x509' registered [ 0.424470] Asymmetric key parser 'pkcs8' registered [ 0.424557] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.424760] io scheduler mq-deadline registered [ 0.424772] io scheduler kyber registered [ 0.424815] io scheduler bfq registered [ 0.430180] ledtrig-cpu: registered to indicate activity on CPUs [ 0.431227] simple-framebuffer 9c000000.framebuffer: framebuffer at 0x9c000000, 0x9a3f80 bytes [ 0.431239] simple-framebuffer 9c000000.framebuffer: format=a8r8g8b8, mode=1080x2340x32, linelength=4320 [ 0.431605] Console: switching to colour frame buffer device 135x146 [ 0.438947] simple-framebuffer 9c000000.framebuffer: fb0: simplefb registered! [ 0.448243] smps1: Setting 1000000-1200000uV [ 0.448475] smps8: Setting 1120000-1408000uV [ 0.448643] ldo1: Setting 1616000-1984000uV [ 0.448882] ldo2: Setting 1200000-1352000uV [ 0.449084] ldo3: Setting 1144000-1256000uV [ 0.449284] ldo4: Setting 1648000-2950000uV [ 0.449479] ldo5: Setting 1648000-2950000uV [ 0.449669] ldo6: Setting 1648000-3100000uV [ 0.449861] ldo7: Setting 3000000-3312000uV [ 0.450053] ldo8: Setting 1800000-1900000uV [ 0.450293] ldo9: Setting 2950000-3100000uV [ 0.450504] ldo10: Setting 3200000-3312000uV [ 0.450715] ldo11: Setting 2950000-3400000uV [ 0.450920] bob: Setting 3296000-3960000uV [ 0.450947] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.452976] msm_serial: driver initialized [ 0.464689] brd: module loaded [ 0.469250] loop: module loaded [ 0.470189] spmi_pmic_arb c440000.spmi: PMIC arbiter version v5 (0x50000000) [ 0.471539] /soc@0/spmi@c440000/pmic@0/typec@1500/connector: Fixed dependency cycle(s) with /soc@0/usb@a6f8800/usb@a600000 [ 0.472848] /soc@0/spmi@c440000/pmic@0/typec@1500/connector: Fixed dependency cycle(s) with /soc@0/usb@a6f8800/usb@a600000 [ 0.481344] tun: Universal TUN/TAP device driver, 1.6 [ 0.481662] thunder_xcv, ver 1.0 [ 0.481686] thunder_bgx, ver 1.0 [ 0.481705] nicpf, ver 1.0 [ 0.481724] e1000: Intel(R) PRO/1000 Network Driver [ 0.481729] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.481753] e1000e: Intel(R) PRO/1000 Network Driver [ 0.481758] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.481869] sky2: driver version 1.30 [ 0.482200] VFIO - User Level meta-driver version: 0.3 [ 0.483073] usbcore: registered new interface driver usb-storage [ 0.484005] i2c_dev: i2c /dev entries driver [ 0.485364] input: pm8941_pwrkey as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@800/c440000.spmi:pmic@0:pon@800:pwrkey/input/input0 [ 0.486370] input: pm8941_resin as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@800/c440000.spmi:pmic@0:pon@800:resin/input/input1 [ 0.495376] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: [email protected] [ 0.497618] sdhci: Secure Digital Host Controller Interface driver [ 0.497629] sdhci: Copyright(c) Pierre Ossman [ 0.497653] Synopsys Designware Multimedia Card Interface Driver [ 0.497762] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.498634] pstore: backend 'ramoops' already in use: ignoring 'efi_pstore' [ 0.498913] hid: raw HID events driver (C) Jiri Kosina [ 0.500399] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 (0,8000003f) counters available [ 0.501230] hw perfevents: enabled with armv8_cortex_a78 PMU driver, 7 (0,8000003f) counters available [ 0.504301] NET: Registered PF_PACKET protocol family [ 0.504379] Key type dns_resolver registered [ 0.511819] registered taskstats version 1 [ 0.512010] Loading compiled-in X.509 certificates [ 0.518925] Demotion targets for Node 0: null [ 0.518997] Key type .fscrypt registered [ 0.519002] Key type fscrypt-provisioning registered [ 0.519928] Btrfs loaded, zoned=no, fsverity=no [ 0.544114] cpu cpu0: EM: OPP:576000 is inefficient [ 0.544328] cpu cpu0: EM: created perf domain [ 0.544338] energy_model: Accessing cpu6 policy failed [ 0.551543] cpu cpu6: EM: created perf domain [ 0.551559] energy_model: updating cpu0 cpu_cap=398 old capacity=488 [ 0.551569] cpu cpu0: EM: OPP:300000 is inefficient [ 0.557577] qcom_scm: convention: smc arm 64 [ 0.557774] qcom_scm firmware:scm: SHM Bridge not supported [ 0.557827] qcom_scm firmware:scm: qseecom: found qseecom with version 0x1400000 [ 0.557840] qcom_scm firmware:scm: qseecom: untested machine, skipping [ 0.563337] qcom-ice 1d90000.crypto: Found QC Inline Crypto Engine (ICE) v3.1.75 [ 0.564135] smps4: Setting 824000-1120000uV [ 0.564336] smps5: Setting 1744000-2040000uV [ 0.564509] ldo1: Setting 1096000-1304000uV [ 0.564520] arm-smmu 5040000.iommu: probing hardware configuration... [ 0.564529] arm-smmu 5040000.iommu: SMMUv2 with: [ 0.564553] arm-smmu 5040000.iommu: stage 1 translation [ 0.564558] arm-smmu 5040000.iommu: address translation ops [ 0.564562] arm-smmu 5040000.iommu: non-coherent table walk [ 0.564567] arm-smmu 5040000.iommu: (IDR0.CTTW overridden by FW configuration) [ 0.564572] arm-smmu 5040000.iommu: stream matching with 5 register groups [ 0.564592] arm-smmu 5040000.iommu: 5 context banks (0 stage-2 only) [ 0.564609] arm-smmu 5040000.iommu: Supported page sizes: 0x61311000 [ 0.564614] arm-smmu 5040000.iommu: Stage-1: 48-bit VA -> 36-bit IPA [ 0.564696] arm-smmu 5040000.iommu: preserved 0 boot mappings [ 0.564974] ldo2: Setting 944000-1056000uV [ 0.565259] ldo3: Setting 968000-1064000uV [ 0.565549] ldo4: Setting 824000-920000uV [ 0.565721] ldo5: Setting 2600000-2800000uV [ 0.565990] ldo6: Setting 1096000-1304000uV [ 0.566260] ldo9: Setting 624000-760000uV [ 0.566545] ldo10: Setting 1720000-1832000uV [ 0.566816] ldo11: Setting 1696000-1984000uV [ 0.567093] ldo12: Setting 1696000-1952000uV [ 0.567362] ldo13: Setting 1696000-1904000uV [ 0.567644] ldo14: Setting 1720000-1856000uV [ 0.567917] ldo15: Setting 1696000-1904000uV [ 0.568197] ldo16: Setting 1800000-1800000uV [ 0.568375] arm-smmu 15000000.iommu: probing hardware configuration... [ 0.568383] arm-smmu 15000000.iommu: SMMUv2 with: [ 0.568401] arm-smmu 15000000.iommu: stage 1 translation [ 0.568406] arm-smmu 15000000.iommu: coherent table walk [ 0.568412] arm-smmu 15000000.iommu: stream matching with 79 register groups [ 0.568437] arm-smmu 15000000.iommu: 61 context banks (0 stage-2 only) [ 0.568490] ldo17: Setting 3000000-3232000uV [ 0.568758] ldo18: Setting 3000000-3000000uV [ 0.568788] arm-smmu 15000000.iommu: Supported page sizes: 0x61311000 [ 0.568794] arm-smmu 15000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.568851] arm-smmu 15000000.iommu: preserved 0 boot mappings [ 0.568936] ldo19: Setting 2944000-3304000uV [ 0.571513] msm-mdss ae00000.display-subsystem: Adding to iommu group 0 [ 0.571763] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c14de00, fsynr=0x4d0020, cbfrsynra=0xc40, cb=0 [ 0.571773] arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0xc40 [ 0.571781] arm-smmu 15000000.iommu: FSYNR0 = 004d0020 [S1CBNDX=77 PNU PLVL=0] [ 0.571797] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c150b00, fsynr=0x4d0020, cbfrsynra=0x800, cb=0 [ 0.571804] arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x800 [ 0.571811] arm-smmu 15000000.iommu: FSYNR0 = 004d0020 [S1CBNDX=77 PNU PLVL=0] [ 0.571985] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c151400, fsynr=0x4d0020, cbfrsynra=0xc40, cb=0 [ 0.571994] arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0xc40 [ 0.572001] arm-smmu 15000000.iommu: FSYNR0 = 004d0020 [S1CBNDX=77 PNU PLVL=0] [ 0.572015] /soc@0/display-subsystem@ae00000/display-controller@ae01000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000 [ 0.572161] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c154d00, fsynr=0x4d0020, cbfrsynra=0xc40, cb=0 [ 0.572170] arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0xc40 [ 0.572177] arm-smmu 15000000.iommu: FSYNR0 = 004d0020 [S1CBNDX=77 PNU PLVL=0] [ 0.572338] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c158200, fsynr=0x4d0020, cbfrsynra=0x800, cb=0 [ 0.572348] arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x800 [ 0.572356] arm-smmu 15000000.iommu: FSYNR0 = 004d0020 [S1CBNDX=77 PNU PLVL=0] [ 0.572382] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c15b700, fsynr=0x4d0020, cbfrsynra=0xc40, cb=0 [ 0.572389] arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0xc40 [ 0.572396] arm-smmu 15000000.iommu: FSYNR0 = 004d0020 [S1CBNDX=77 PNU PLVL=0] [ 0.572563] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c15c400, fsynr=0x4d0020, cbfrsynra=0xc40, cb=0 [ 0.572572] arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0xc40 [ 0.572580] arm-smmu 15000000.iommu: FSYNR0 = 004d0020 [S1CBNDX=77 PNU PLVL=0] [ 0.572600] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c15fb00, fsynr=0x4d0020, cbfrsynra=0x800, cb=0 [ 0.572608] arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x800 [ 0.572615] arm-smmu 15000000.iommu: FSYNR0 = 004d0020 [S1CBNDX=77 PNU PLVL=0] [ 0.572636] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c160500, fsynr=0x4d0020, cbfrsynra=0xc40, cb=0 [ 0.572643] arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0xc40 [ 0.572650] arm-smmu 15000000.iommu: FSYNR0 = 004d0020 [S1CBNDX=77 PNU PLVL=0] [ 0.572667] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c161000, fsynr=0x4d0020, cbfrsynra=0x800, cb=0 [ 0.572674] arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x800 [ 0.572681] arm-smmu 15000000.iommu: FSYNR0 = 004d0020 [S1CBNDX=77 PNU PLVL=0] [ 0.573135] /soc@0/display-subsystem@ae00000/display-controller@ae01000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000 [ 0.573254] /soc@0/display-subsystem@ae00000/dsi@ae94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0 [ 0.573272] /soc@0/display-subsystem@ae00000/dsi@ae94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/display-controller@ae01000 [ 0.573538] /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000 [ 0.582680] /soc@0/spmi@c440000/pmic@0/typec@1500/connector: Fixed dependency cycle(s) with /soc@0/usb@a6f8800/usb@a600000 [ 0.582796] /soc@0/usb@a6f8800/usb@a600000: Fixed dependency cycle(s) with /soc@0/spmi@c440000/pmic@0/typec@1500/connector [ 0.591672] ufshcd-qcom 1d84000.ufshc: Adding to iommu group 1 [ 0.592715] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 0.592830] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled [ 0.608263] gpi 800000.dma-controller: Adding to iommu group 2 [ 0.609359] gpi a00000.dma-controller: Adding to iommu group 3 [ 0.611846] qcom-qusb2-phy 88e2000.phy: Registered Qcom-QUSB2 phy [ 0.612314] geni_se_qup 8c0000.geniqup: Adding to iommu group 4 [ 0.617231] 88c000.serial: ttyHS0 at MMIO 0x88c000 (irq = 150, base_baud = 0) is a MSM [ 0.617721] serial serial0: tty port ttyHS0 registered [ 0.622522] geni_se_qup ac0000.geniqup: Adding to iommu group 5 [ 0.629080] Freeing initrd memory: 10292K [ 1.064098] input: goodix_ts as /devices/virtual/input/input2 [ 1.066185] [GTP-INF][goodix_ts_probe:935] goodix_ts_probe OUT, r:0 [ 1.069256] a88000.serial: ttyMSM0 at MMIO 0xa88000 (irq = 155, base_baud = 0) is a MSM [ 1.091852] printk: legacy console [ttyMSM0] enabled [ 1.099623] adreno 5000000.gpu: Adding to iommu group 6 [ 1.104529] msm_dsi ae94000.dsi: supply refgen not found, using dummy regulator [ 1.105069] /soc@0/display-subsystem@ae00000/dsi@ae94000: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0 [ 1.105235] /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000 [ 1.106489] msm_dpu ae01000.display-controller: bound ae94000.dsi (ops dsi_ops) [ 1.107536] adreno 5000000.gpu: supply vdd not found, using dummy regulator [ 1.107614] adreno 5000000.gpu: supply vddcx not found, using dummy regulator [ 1.115436] platform 506a000.gmu: Adding to iommu group 7 [ 1.116623] msm_dpu ae01000.display-controller: bound 5000000.gpu (ops a3xx_ops) [ 1.117119] Console: switching to colour dummy device 80x25 [ 1.120866] [drm:dpu_kms_hw_init:1156] dpu hardware revision:0x50020000 [ 1.127033] [drm] Initialized msm 1.12.0 for ae01000.display-controller on minor 0 [ 1.127819] msm_dpu ae01000.display-controller: [drm:adreno_request_fw] loaded qcom/a630_sqe.fw from new location [ 1.128264] msm_dpu ae01000.display-controller: [drm:adreno_request_fw] loaded qcom/a630_gmu.bin from new location [ 1.132604] adreno 5000000.gpu: [drm:adreno_zap_shader_load] *ERROR* Unable to load qcom/sm7150/davinci/a615_zap.mbn [ 1.132626] msm_dpu ae01000.display-controller: [drm:adreno_load_gpu] *ERROR* gpu hw init failed: -2 [ 1.285749] Console: switching to colour frame buffer device 135x146 [ 1.285784] fb0: Framebuffer is not in virtual address space. [ 1.327859] fb0: Framebuffer is not in virtual address space. [ 1.350619] msm_dpu ae01000.display-controller: [drm] fb0: msmdrmfb frame buffer device [ 1.353022] dwc3 a600000.usb: Adding to iommu group 8 [ 1.372930] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 1.372956] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled [ 1.500277] scsi host0: ufshcd [ 1.502415] scsi 0:0:0:49488: Well-known LUN SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6 [ 1.503324] input: gpio-keys as /devices/platform/gpio-keys/input/input3 [ 1.503775] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.507387] scsi 0:0:0:49476: Well-known LUN SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6 [ 1.509276] scsi 0:0:0:49456: Well-known LUN SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6 [ 1.512401] scsi 0:0:0:0: Direct-Access SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6 [ 1.514084] scsi 0:0:0:1: Direct-Access SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6 [ 1.515330] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.515806] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.515864] clk: Disabling unused clocks [ 1.515887] scsi 0:0:0:2: Direct-Access SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6 [ 1.516344] PM: genpd: Disabling unused power domains [ 1.516375] ALSA device list: [ 1.516379] No soundcards found. [ 1.517474] scsi 0:0:0:3: Direct-Access SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6 [ 1.519020] scsi 0:0:0:4: Direct-Access SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6 [ 1.520753] scsi 0:0:0:5: Direct-Access SAMSUNG KM2V7001CM-B706 0800 PQ: 0 ANSI: 6 [ 1.523025] sd 0:0:0:0: [sda] 30922752 4096-byte logical blocks: (127 GB/118 GiB) [ 1.523273] sd 0:0:0:0: [sda] Write Protect is off [ 1.523282] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10 [ 1.523561] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB) [ 1.523665] sd 0:0:0:2: [sdc] Write Protect is off [ 1.523676] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10 [ 1.523803] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.523817] sd 0:0:0:1: [sdb] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB) [ 1.523821] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.523924] sd 0:0:0:0: [sda] Preferred minimum I/O size 8192 bytes [ 1.523931] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes [ 1.524028] sd 0:0:0:3: [sdd] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB) [ 1.524050] sd 0:0:0:1: [sdb] Write Protect is off [ 1.524058] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10 [ 1.524092] sd 0:0:0:3: [sdd] Write Protect is off [ 1.524099] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10 [ 1.524163] sd 0:0:0:2: [sdc] Preferred minimum I/O size 8192 bytes [ 1.524171] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes [ 1.524216] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.524315] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.524351] sd 0:0:0:3: [sdd] Preferred minimum I/O size 8192 bytes [ 1.524359] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes [ 1.524499] sd 0:0:0:1: [sdb] Preferred minimum I/O size 8192 bytes [ 1.524507] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes [ 1.525745] sd 0:0:0:5: [sdf] 40960 4096-byte logical blocks: (168 MB/160 MiB) [ 1.525847] sd 0:0:0:5: [sdf] Write Protect is off [ 1.525890] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10 [ 1.526068] sd 0:0:0:4: [sde] 262144 4096-byte logical blocks: (1.07 GB/1.00 GiB) [ 1.526078] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.526177] sd 0:0:0:5: [sdf] Preferred minimum I/O size 8192 bytes [ 1.526189] sd 0:0:0:5: [sdf] Optimal transfer size 8192 bytes [ 1.526286] sd 0:0:0:4: [sde] Write Protect is off [ 1.526294] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10 [ 1.526578] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.526665] sd 0:0:0:4: [sde] Preferred minimum I/O size 8192 bytes [ 1.526673] sd 0:0:0:4: [sde] Optimal transfer size 8192 bytes [ 1.539489] sdb: sdb1 sdb2 [ 1.540313] sd 0:0:0:1: [sdb] Attached SCSI disk [ 1.540336] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 [ 1.540487] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 [ 1.541529] sd 0:0:0:3: [sdd] Attached SCSI disk [ 1.541586] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 [ 1.541715] sdc: sdc1 sdc2 [ 1.542089] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 [ 1.542679] sd 0:0:0:2: [sdc] Attached SCSI disk [ 1.544550] sd 0:0:0:5: [sdf] Attached SCSI disk [ 1.546495] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.556543] sd 0:0:0:4: [sde] Attached SCSI disk [ 1.566379] Freeing unused kernel memory: 7680K [ 1.566625] Run /init as init process [ 1.566638] with arguments: [ 1.566648] /init [ 1.566657] with environment: [ 1.566666] HOME=/ [ 1.566675] TERM=linux [ 1.566684] pmos_boot_uuid=E150-D080 [ 1.566693] pmos_root_uuid=14b31106-1453-4ee4-842b-f85813c29ed0 [ 1.566703] pmos_rootfsopts=defaults [ 1.623637] syslogd started: BusyBox v1.37.0 [ 1.625865] [pmOS-rd]: ❬❬ PMOS STAGE 1 ❭❭ [ 1.625894] [pmOS-rd]: initramfs version: 3.7.5-r0 [ 1.625905] [pmOS-rd]: ❬❬ PMOS STAGE 2 ❭❭ [ 1.649936] [pmOS-rd]: Starting systemd-udevd version 256.11 [ 2.300411] [pmOS-rd]: Setup usb network [ 2.308615] [pmOS-rd]: Setting up USB gadget through configfs [ 2.324076] configfs-gadget.g1 gadget.0: HOST MAC 06:27:aa:f1:08:3b [ 2.324096] configfs-gadget.g1 gadget.0: MAC be:a4:85:49:29:be [ 2.343216] [pmOS-rd]: Starting unudhcpd with server ip 172.16.42.1, client ip: 172.16.42.2 [ 2.352074] [pmOS-rd]: Using interface usb0 [ 2.352105] [pmOS-rd]: Starting the DHCP daemon [ 2.352520] [pmOS-rd]: Trying to start server with parameters: Server IP addr: 172.16.42.1:67, client IP addr: 172.16.42.2, interface: usb0 [ 2.357976] [pmOS-rd]: Setting framebuffer mode to: U:1080x2340p-0 [ 2.453030] [pmOS-rd]: Running initramfs hook: /hooks/00-device-qcom-sm7150.sh [ 3.469870] [pmOS-rd]: Trying to mount subpartitions for 10 seconds... [ 5.999574] [pmOS-rd]: /dev/sda32 [ 7.396737] [pmOS-rd]: Unable to resize root partition: failed to find qualifying partition [ 7.414977] [pmOS-rd]: Auto-repair and check 'ext' filesystem (/dev/sda32) [ 7.424048] [pmOS-rd]: pmOS_root: clean, 42905/7077280 files, 1193091/29136379 blocks [ 7.588513] [pmOS-rd]: Resize 'ext4' root filesystem (/dev/sda32) [ 7.594494] [pmOS-rd]: resize2fs 1.47.2 (1-Jan-2025) [ 7.596847] [pmOS-rd]: The filesystem is already 29136379 (4k) blocks long. Nothing to do! [ 7.603034] [pmOS-rd]: Mount root partition (/dev/sda32) to /sysroot (read-write) with options defaults [ 7.625691] [pmOS-rd]: Detected ext4 filesystem [ 7.691005] EXT4-fs (sda32): mounted filesystem 14b31106-1453-4ee4-842b-f85813c29ed0 r/w with ordered data mode. Quota mode: none. [ 7.713757] [pmOS-rd]: Switching root [ 7.883736] syslogd exiting [ 7.991122] systemd[1]: System time before build time, advancing clock. [ 8.039481] NET: Registered PF_INET6 protocol family [ 8.040960] Segment Routing with IPv6 [ 8.041001] In-situ OAM (IOAM) with IPv6 [ 8.072865] systemd[1]: systemd 256.11 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID -CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE -TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON -UTMP -SYSVINIT -LIBARCHIVE) [ 8.072908] systemd[1]: Detected architecture arm64. [ 8.075891] systemd[1]: Hostname set to <qcom-sm7150>. [ 8.769125] systemd[1]: Queued start job for default target Graphical Interface. [ 8.798040] systemd[1]: Created slice Slice /system/getty. [ 8.798918] systemd[1]: Created slice Slice /system/modprobe. [ 8.799688] systemd[1]: Created slice Slice /system/serial-getty. [ 8.800161] systemd[1]: Created slice User and Session Slice. [ 8.800300] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 8.800389] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.800753] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.800816] systemd[1]: Expecting device /dev/disk/by-uuid/E150-D080... [ 8.800840] systemd[1]: Expecting device /dev/ttyMSM0... [ 8.800877] systemd[1]: Reached target Local Encrypted Volumes. [ 8.800928] systemd[1]: Reached target Local Integrity Protected Volumes. [ 8.800998] systemd[1]: Reached target Path Units. [ 8.801040] systemd[1]: Reached target Remote Encrypted Volumes. [ 8.801077] systemd[1]: Reached target Remote File Systems. [ 8.801110] systemd[1]: Reached target Slice Units. [ 8.801181] systemd[1]: Reached target Local Verity Protected Volumes. [ 8.806153] systemd[1]: Listening on Process Core Dump Socket. [ 8.809630] systemd[1]: Listening on Credential Encryption/Decryption. [ 8.809914] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.810136] systemd[1]: Listening on Journal Sockets. [ 8.810293] systemd[1]: Listening on DDI File System Mounter Socket. [ 8.810484] systemd[1]: Listening on Namespace Resource Manager Socket. [ 8.810701] systemd[1]: Listening on udev Control Socket. [ 8.810855] systemd[1]: Listening on udev Kernel Socket. [ 8.815074] systemd[1]: Mounting Huge Pages File System... [ 8.817703] systemd[1]: Mounting POSIX Message Queue File System... [ 8.820127] systemd[1]: Mounting Kernel Debug File System... [ 8.822513] systemd[1]: Mounting Kernel Trace File System... [ 8.825497] systemd[1]: Starting Create List of Static Device Nodes... [ 8.828337] systemd[1]: Starting Load Kernel Module configfs... [ 8.830715] systemd[1]: Starting Load Kernel Module dm_mod... [ 8.832969] systemd[1]: Starting Load Kernel Module drm... [ 8.835145] systemd[1]: Starting Load Kernel Module efi_pstore... [ 8.837543] systemd[1]: Starting Load Kernel Module fuse... [ 8.839828] systemd[1]: Starting Load Kernel Module loop... [ 8.841964] systemd[1]: Starting Load firmware that is located on dedicated partitions of qcom devices... [ 8.844360] systemd[1]: Starting Setting the system time according to an offset file... [ 8.844542] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). [ 8.849945] systemd[1]: Starting Journal Service... [ 8.853177] systemd[1]: Starting Load Kernel Modules... [ 8.855179] systemd[1]: Starting Load udev Rules from Credentials... [ 8.857620] systemd[1]: Starting Coldplug All udev Devices... [ 8.859593] systemd[1]: Starting swap with zram... [ 8.862693] systemd[1]: Mounted Kernel Debug File System. [ 8.878628] systemd[1]: Mounted Huge Pages File System. [ 8.930563] systemd[1]: Mounted Kernel Trace File System. [ 8.930953] systemd[1]: Mounted POSIX Message Queue File System. [ 8.945540] systemd[1]: Finished Create List of Static Device Nodes. [ 8.946577] systemd[1]: [email protected]: Deactivated successfully. [ 8.947147] systemd[1]: Finished Load Kernel Module configfs. [ 8.949942] systemd[1]: Mounting Kernel Configuration File System... [ 8.954146] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... [ 8.997931] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 8.998836] systemd[1]: Finished Load Kernel Module dm_mod. [ 9.041224] systemd[1]: [email protected]: Deactivated successfully. [ 9.042433] systemd[1]: Finished Load Kernel Module drm. [ 9.049913] systemd[1]: [email protected]: Deactivated successfully. [ 9.050895] systemd[1]: Finished Load Kernel Module loop. [ 9.052965] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 9.053759] systemd[1]: Finished Load Kernel Module efi_pstore. [ 9.060056] systemd[1]: swclock-offset-boot.service: Main process exited, code=exited, status=1/FAILURE [ 9.060538] fuse: init (API version 7.42) [ 9.060885] systemd[1]: swclock-offset-boot.service: Failed with result 'exit-code'. [ 9.061642] systemd[1]: Failed to start Setting the system time according to an offset file. [ 9.105672] systemd-journald[440]: Collecting audit messages is disabled. [ 9.158117] zram: Added device: zram0 [ 9.158688] zram: Added device: zram1 [ 9.159087] zram: Added device: zram2 [ 9.173435] systemd[1]: Started Journal Service. [ 9.248744] zram0: detected capacity change from 0 to 5623808 [ 9.279360] EXT4-fs (sda32): re-mounted 14b31106-1453-4ee4-842b-f85813c29ed0 r/w. Quota mode: none. [ 9.285404] EXT4-fs (dm-1): mounted filesystem 81fdb6fc-efed-57b5-9c52-860c4b8142ae ro without journal. Quota mode: none. [ 9.313353] systemd-journald[440]: Received client request to flush runtime journal. [ 9.353902] systemd-journald[440]: /var/log/journal/2a18ef822ece4e7bb5368bd0732ab6a0/system.journal: Realtime clock jumped backwards relative to last journal entry, rotating. [ 9.353924] systemd-journald[440]: Rotating system journal. [ 9.416481] random: crng init done [ 9.555596] Adding 2811900k swap on /dev/zram0. Priority:16383 extents:1 across:2811900k SSDsc [ 9.839012] EXT4-fs (sde47): mounted filesystem af32c008-2a39-7e5b-a5dc-201456d93103 ro with ordered data mode. Quota mode: none. [ 9.990662] EXT4-fs (sdf7): mounted filesystem 61b36bbe-6c59-423e-9eec-6ffc12dbd481 ro with ordered data mode. Quota mode: none. [ 12.779887] platform 62b52000.pinctrl: deferred probe pending: platform: wait for supplier /soc@0/remoteproc@62400000/glink-edge/apr/service@4/clock-controller [ 12.779909] qnoc-sm7150 1500000.interconnect: sync_state() pending due to 1e40000.ipa [ 12.779916] qnoc-sm7150 1620000.interconnect: sync_state() pending due to 1e40000.ipa [ 12.779922] qnoc-sm7150 1380000.interconnect: sync_state() pending due to 1e40000.ipa [ 12.779928] qnoc-sm7150 1700000.interconnect: sync_state() pending due to 1e40000.ipa [ 12.779937] qnoc-sm7150 1380000.interconnect: sync_state() pending due to 90cd000.pmu [ 12.779943] qnoc-sm7150 9680000.interconnect: sync_state() pending due to 90b6300.pmu [ 12.779949] qnoc-sm7150 9680000.interconnect: sync_state() pending due to 1e40000.ipa [ 12.779971] qcom-rpmhpd 18200000.rsc:power-controller: sync_state() pending due to 4080000.remoteproc [ 12.779976] qcom-rpmhpd 18200000.rsc:power-controller: sync_state() pending due to 8300000.remoteproc [ 12.779982] qcom-rpmhpd 18200000.rsc:power-controller: sync_state() pending due to 62400000.remoteproc [ 13.670955] ipa 1e40000.ipa: Adding to iommu group 9 [ 13.699126] ipa 1e40000.ipa: IPA driver initialized [ 13.704369] ath10k_snoc 18800000.wifi: Adding to iommu group 10 [ 13.729729] ipa 1e40000.ipa: IPA driver setup completed successfully [ 13.732255] mc: Linux media interface: v0.10 [ 13.746985] videodev: Linux video capture interface: v2.00 [ 13.750480] remoteproc remoteproc0: adsp is available [ 13.751714] remoteproc remoteproc0: powering up adsp [ 13.751751] remoteproc remoteproc0: Booting fw image qcom/sm7150/davinci/adsp.mbn, size 8860 [ 13.762250] /soc@0/camss@ace0000: Fixed dependency cycle(s) with /soc@0/cci@ac4a000/i2c-bus@1/camera@36 [ 13.778611] remoteproc remoteproc1: cdsp is available [ 13.778642] /soc@0/cci@ac4a000/i2c-bus@1/camera@36: Fixed dependency cycle(s) with /soc@0/camss@ace0000 [ 13.779319] remoteproc remoteproc1: powering up cdsp [ 13.779352] remoteproc remoteproc1: Booting fw image qcom/sm7150/davinci/cdsp.mbn, size 7580 [ 13.790485] tfa987x 4-0034: Chip revision: 0x0c74 [ 13.812195] /soc@0/camss@ace0000: Fixed dependency cycle(s) with /soc@0/cci@ac4b000/i2c-bus@0/camera@10 [ 13.813942] /soc@0/cci@ac4b000/i2c-bus@0/camera@10: Fixed dependency cycle(s) with /soc@0/camss@ace0000 [ 13.829250] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6000: registered as rtc0 [ 13.829293] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6000: setting system clock to 1970-01-05T12:46:46 UTC (391606) [ 13.836344] remoteproc remoteproc2: modem is available [ 13.839437] qcom-camss ace0000.camss: Adding to iommu group 11 [ 13.840010] input: pm8xxx_vib_ffmemless as /devices/platform/soc@0/c440000.spmi/spmi-0/0-01/c440000.spmi:pmic@1:vibrator@5300/input/input4 [ 13.840490] systemd-journald[440]: Time jumped backwards, rotating. [ 13.943654] Bluetooth: Core ver 2.22 [ 13.944463] NET: Registered PF_BLUETOOTH protocol family [ 13.944474] Bluetooth: HCI device and connection manager initialized [ 13.944489] Bluetooth: HCI socket layer initialized [ 13.944495] Bluetooth: L2CAP socket layer initialized [ 13.944615] Bluetooth: SCO socket layer initialized [ 13.945196] qcom-camss ace0000.camss: supply vdda-phy not found, using dummy regulator [ 13.945277] qcom-camss ace0000.camss: supply vdda-pll not found, using dummy regulator [ 13.945352] qcom-camss ace0000.camss: supply vdda-phy not found, using dummy regulator [ 13.945360] qcom-camss ace0000.camss: supply vdda-pll not found, using dummy regulator [ 13.947719] remoteproc remoteproc1: remote processor cdsp is now up [ 13.990645] Bluetooth: HCI UART driver ver 2.3 [ 13.990661] Bluetooth: HCI UART protocol H4 registered [ 14.010042] Bluetooth: HCI UART protocol LL registered [ 14.032491] Bluetooth: HCI UART protocol Broadcom registered [ 14.035215] Bluetooth: HCI UART protocol QCA registered [ 14.040022] Bluetooth: HCI UART protocol Marvell registered [ 14.068604] Bluetooth: hci0: setting up wcn399x [ 14.082968] vfe_set_power called, on=1 [ 14.082976] vfe_get called [ 14.085876] VFE ISR called, irq=211 [ 14.085904] VFE ISR status0=2147483648 [ 14.085907] VFE reset acked [ 14.085926] VFE reset successfully (irq name: ace0000.camss_msm_vfe1) [ 14.085932] vfe_get (irq name: ace0000.camss_msm_vfe1) return 0 [ 14.086002] vfe_set_power called, on=0 [ 14.086004] vfe_put called [ 14.086909] vfe_set_power called, on=1 [ 14.086915] vfe_get called [ 14.087108] VFE ISR called, irq=210 [ 14.087131] VFE ISR status0=2147483648 [ 14.087134] VFE reset acked [ 14.087479] VFE reset successfully (irq name: ace0000.camss_msm_vfe0) [ 14.087487] vfe_get (irq name: ace0000.camss_msm_vfe0) return 0 [ 14.087999] vfe_set_power called, on=1 [ 14.088009] vfe_get called [ 14.088021] vfe_get (irq name: ace0000.camss_msm_vfe0) return 0 [ 14.088120] vfe_set_power called, on=0 [ 14.088124] vfe_put called [ 14.088929] vfe_set_power called, on=0 [ 14.088936] vfe_put called [ 14.089321] vfe_set_power called, on=1 [ 14.089332] vfe_get called [ 14.089656] VFE ISR called, irq=211 [ 14.089679] VFE ISR status0=2147483648 [ 14.089681] VFE reset acked [ 14.089716] VFE reset successfully (irq name: ace0000.camss_msm_vfe1) [ 14.089725] vfe_get (irq name: ace0000.camss_msm_vfe1) return 0 [ 14.089866] vfe_set_power called, on=0 [ 14.089872] vfe_put called [ 14.090321] vfe_set_power called, on=1 [ 14.090335] vfe_get called [ 14.090717] VFE ISR called, irq=211 [ 14.090741] VFE ISR status0=2147483648 [ 14.090744] VFE reset acked [ 14.091251] VFE reset successfully (irq name: ace0000.camss_msm_vfe1) [ 14.091259] vfe_get (irq name: ace0000.camss_msm_vfe1) return 0 [ 14.091342] vfe_set_power called, on=0 [ 14.091344] vfe_put called [ 14.097167] vfe_set_power called, on=1 [ 14.097179] vfe_get called [ 14.097274] VFE ISR called, irq=212 [ 14.097293] VFE ISR status0=2147483648 [ 14.097296] VFE reset acked [ 14.097723] VFE reset successfully (irq name: ace0000.camss_msm_vfe2) [ 14.097735] vfe_get (irq name: ace0000.camss_msm_vfe2) return 0 [ 14.097779] vfe_set_power called, on=1 [ 14.097785] vfe_get called [ 14.102205] VFE ISR called, irq=210 [ 14.102229] VFE ISR status0=2147483648 [ 14.102232] VFE reset acked [ 14.102239] VFE reset successfully (irq name: ace0000.camss_msm_vfe0) [ 14.102244] vfe_get (irq name: ace0000.camss_msm_vfe0) return 0 [ 14.102274] vfe_set_power called, on=1 [ 14.102279] vfe_get called [ 14.102285] vfe_get (irq name: ace0000.camss_msm_vfe0) return 0 [ 14.102304] vfe_set_power called, on=1 [ 14.102306] vfe_get called [ 14.102311] vfe_get (irq name: ace0000.camss_msm_vfe2) return 0 [ 14.102336] vfe_set_power called, on=1 [ 14.102341] vfe_get called [ 14.110533] VFE ISR called, irq=211 [ 14.110560] VFE ISR status0=2147483648 [ 14.110563] VFE reset acked [ 14.111064] VFE reset successfully (irq name: ace0000.camss_msm_vfe1) [ 14.111080] vfe_get (irq name: ace0000.camss_msm_vfe1) return 0 [ 14.111106] vfe_set_power called, on=1 [ 14.111110] vfe_get called [ 14.111117] vfe_get (irq name: ace0000.camss_msm_vfe2) return 0 [ 14.111142] vfe_set_power called, on=1 [ 14.111147] vfe_get called [ 14.111152] vfe_get (irq name: ace0000.camss_msm_vfe2) return 0 [ 14.111184] vfe_set_power called, on=0 [ 14.111185] vfe_put called [ 14.111190] vfe_set_power called, on=0 [ 14.111193] vfe_put called [ 14.111758] qcom,fastrpc 8300000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC [ 14.113610] vfe_set_power called, on=0 [ 14.113621] vfe_put called [ 14.113722] vfe_set_power called, on=0 [ 14.113725] vfe_put called [ 14.114380] vfe_set_power called, on=0 [ 14.114392] vfe_put called [ 14.122220] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@1: Adding to iommu group 12 [ 14.122902] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@2: Adding to iommu group 13 [ 14.123490] vfe_set_power called, on=0 [ 14.123500] vfe_put called [ 14.123569] vfe_set_power called, on=0 [ 14.123572] vfe_put called [ 14.126739] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 14 [ 14.127352] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 15 [ 14.127840] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 16 [ 14.128298] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 17 [ 14.203063] Bluetooth: hci0: QCA Product ID :0x0000000a [ 14.203070] Bluetooth: hci0: QCA SOC Version :0x40020140 [ 14.203071] Bluetooth: hci0: QCA ROM Version :0x00000201 [ 14.203072] Bluetooth: hci0: QCA Patch Version:0x00000001 [ 14.216728] Bluetooth: hci0: QCA controller version 0x01400201 [ 14.216736] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv [ 14.379937] remoteproc remoteproc0: remote processor adsp is now up [ 14.388483] qcom,fastrpc 62400000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC [ 14.389941] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 18 [ 14.391519] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 19 [ 14.393051] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 20 [ 14.394433] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 21 [ 14.396255] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 22 [ 14.399469] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@8: Adding to iommu group 23 [ 14.405534] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:3 [ 14.405687] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:4 [ 14.405753] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:7 [ 14.405850] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:8 [ 14.448853] q6asm-dai 62400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 24 [ 14.481845] input: Xiaomi Mi 9T Headset Jack as /devices/platform/sound/sound/card0/input5 [ 15.232658] Bluetooth: hci0: QCA Downloading qca/crnv21.bin [ 15.384121] Bluetooth: hci0: QCA setup on UART is completed [ 15.640335] FAT-fs (sda30): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 16.182751] Bluetooth: MGMT ver 1.23 [ 16.249600] remoteproc remoteproc2: powering up modem [ 16.250079] remoteproc remoteproc2: Booting fw image qcom/sm7150/davinci/modem.mbn, size 9100 [ 16.252169] ipa 1e40000.ipa: received modem starting event [ 16.266425] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.266437] Bluetooth: BNEP filters: protocol multicast [ 16.266500] Bluetooth: BNEP socket layer initialized [ 17.094832] ipa 1e40000.ipa: received modem running event [ 17.094844] remoteproc remoteproc2: remote processor modem is now up [ 18.168916] ath10k_snoc 18800000.wifi: qmi chip_id 0x140 chip_family 0x4002 board_id 0xff soc_id 0x40090000 [ 18.168953] ath10k_snoc 18800000.wifi: qmi fw_version 0x3012006b fw_build_timestamp 2021-02-04 04:37 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.0.1.c3-00107-QCAHLSWMTPLZ-1.373316.3 [ 22.072664] ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000 [ 22.072701] ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 22.072721] ath10k_snoc 18800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790 [ 22.095969] ath10k_snoc 18800000.wifi: htt-ver 3.61 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1 [ 22.179799] ath10k_snoc 18800000.wifi: invalid MAC address; choosing random [ 22.180020] ath: EEPROM regdomain: 0x406c [ 22.180030] ath: EEPROM indicates we should expect a direct regpair map [ 22.180045] ath: Country alpha2 being used: 00 [ 22.180051] ath: Regpair used: 0x6c [ 22.943308] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds) [ 23.128424] wlan0: authenticate with 02:a0:57:4c:88:05 (local address=e6:f7:a0:81:84:0a) [ 23.128462] wlan0: send auth to 02:a0:57:4c:88:05 (try 1/3) [ 23.202231] wlan0: authenticate with 02:a0:57:4c:88:05 (local address=e6:f7:a0:81:84:0a) [ 23.202259] wlan0: send auth to 02:a0:57:4c:88:05 (try 1/3) [ 23.204828] wlan0: authenticated [ 23.205481] wlan0: associate with 02:a0:57:4c:88:05 (try 1/3) [ 23.207847] wlan0: RX AssocResp from 02:a0:57:4c:88:05 (capab=0x1811 status=0 aid=6) [ 23.275592] wlan0: associated [ 23.275810] ath: EEPROM regdomain: 0x8114 [ 23.275823] ath: EEPROM indicates we should expect a country code [ 23.275830] ath: doing EEPROM country->regdmn map search [ 23.275834] ath: country maps to regdmn code: 0x37 [ 23.275840] ath: Country alpha2 being used: DE [ 23.275844] ath: Regpair used: 0x37 [ 23.275849] ath: regdomain 0x8114 dynamically updated by country element [ 23.282507] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by 02:a0:57:4c:88:05 [ 23.287528] vfe_set_power called, on=1 [ 23.287543] vfe_get called [ 23.339004] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe0) [ 23.339238] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 23.339699] vfe_set_power called, on=1 [ 23.339709] vfe_get called [ 23.391528] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe0) [ 23.391859] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 23.392247] vfe_set_power called, on=1 [ 23.392261] vfe_get called [ 23.442573] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe2) [ 23.442668] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 23.442989] vfe_set_power called, on=1 [ 23.442999] vfe_get called [ 23.493636] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe2) [ 23.493734] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 23.494216] vfe_set_power called, on=1 [ 23.494230] vfe_get called [ 23.545881] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe0) [ 23.546388] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 23.546964] vfe_set_power called, on=1 [ 23.546977] vfe_get called [ 23.597730] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe0) [ 23.598252] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 23.598818] vfe_set_power called, on=1 [ 23.598832] vfe_get called [ 23.649705] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe1) [ 23.650283] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 23.650904] vfe_set_power called, on=1 [ 23.650919] vfe_get called [ 23.701509] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe1) [ 23.701876] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 23.702135] vfe_set_power called, on=1 [ 23.702145] vfe_get called [ 23.752715] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe1) [ 23.753279] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 23.753915] vfe_set_power called, on=1 [ 23.753930] vfe_get called [ 23.804697] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe1) [ 23.805069] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 23.805669] vfe_set_power called, on=1 [ 23.805684] vfe_get called [ 23.856621] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe2) [ 23.856676] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 23.856976] vfe_set_power called, on=1 [ 23.856983] vfe_get called [ 23.908545] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe2) [ 23.908702] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 24.089043] Bluetooth: RFCOMM TTY layer initialized [ 24.089062] Bluetooth: RFCOMM socket layer initialized [ 24.089078] Bluetooth: RFCOMM ver 1.11 [ 50.532317] rfkill: input handler disabled [ 51.900326] vfe_set_power called, on=1 [ 51.900336] vfe_get called [ 51.951235] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe0) [ 51.951468] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 51.951736] vfe_set_power called, on=1 [ 51.951744] vfe_get called [ 52.002979] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe0) [ 52.003294] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 52.003536] vfe_set_power called, on=1 [ 52.003545] vfe_get called [ 52.055129] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe2) [ 52.055238] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 52.055492] vfe_set_power called, on=1 [ 52.055499] vfe_get called [ 52.106059] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe2) [ 52.106176] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 52.106319] vfe_set_power called, on=1 [ 52.106323] vfe_get called [ 52.159054] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe0) [ 52.159247] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 52.159397] vfe_set_power called, on=1 [ 52.159402] vfe_get called [ 52.210304] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe0) [ 52.210546] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 52.210796] vfe_set_power called, on=1 [ 52.210805] vfe_get called [ 52.262144] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe1) [ 52.262320] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 52.262463] vfe_set_power called, on=1 [ 52.262467] vfe_get called [ 52.313174] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe1) [ 52.313372] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 52.313530] vfe_set_power called, on=1 [ 52.313535] vfe_get called [ 52.365202] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe1) [ 52.365381] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 52.365537] vfe_set_power called, on=1 [ 52.365542] vfe_get called [ 52.416402] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe1) [ 52.416793] qcom-camss ace0000.camss: Failed to power up pipeline: -5 [ 52.417066] vfe_set_power called, on=1 [ 52.417075] vfe_get called [ 52.467330] qcom-camss ace0000.camss: VFE reset timeout (irq name: ace0000.camss_msm_vfe2) [ 52.467414] qcom-camss ace0000.camss: Failed to power up pipeline: -5