All gists

Adrian / gist:2f8e059d346e47df8fc0294597a54dce

0 likes
0 forks
1 files
Last active 1741180867
1 qcom-sm7150:~$ sudo systemd-analyze time
2 Startup finished in 6.889s (firmware) + 173ms (loader) + 7.526s (kernel) + 15.316s (userspace) = 29.905s
3 graphical.target reached after 15.315s in userspace.
4 qcom-sm7150:~$ sudo systemd-analyze blame
5 7.528s msm-modem-uim-selection.service
6 5.290s dev-sda32.device
7 5.097s dev-sde51.device
8 5.026s dev-sdf7.device
9 4.739s dev-sde47.device
10 4.356s dev-sde26.device

Adrian / gist:ad4cb05c5fcd4b749c3ce1a8d2bf020b

0 likes
0 forks
1 files
Last active 1741173355
1 (bootloader) product:sunfish
2 (bootloader) serialno:0A221JEC217849
3 (bootloader) variant:SM7 UFS
4 (bootloader) max-download-size:0x10000000
5 (bootloader) slot-suffixes:_a,_b
6 (bootloader) version-bootloader:s5-0.5-10252351
7 (bootloader) version-baseband:g7150-00112-230505-B-10075601
8 (bootloader) secure-boot:PRODUCTION
9 (bootloader) secure:yes
10 (bootloader) hw-revision:MP1.0

Adrian / gist:a27f0387c32a4d64a3a4b9a0259b3e2a

0 likes
0 forks
1 files
Last active 1741117091
1 #!/bin/sh
2 # SPDX-License-Identifier: MIT
3
4 #
5 # This script is responsible for loading firmware blobs for the HexagonFS
6 # on qcom devices. It assumes to be run after msm-firmware-loader.
7 #
8
9 # Base directory that msm-firmware-loader uses.
10 BASEDIR="/lib/firmware/msm-firmware-loader"

Adrian / gist:485187656c634be69c5920a7229c3535

0 likes
0 forks
1 files
Last active 1741110233
1 # Newer Qualcomm devices need firmware files for HexagonFS.
2 # Symlink the firmware files if a sensor registry exists.
3 if [ -d "$BASEDIR"/mnt/persist/sensors/registry/registry ]
4 then
5 # Set up the hexagonrpcd firmware directory
6 HEXAGONFS_BASE="/usr/share/qcom"
7 mkdir -p "$HEXAGONFS_BASE"
8 mount -o mode=755,nodev,noexec,nosuid -t tmpfs none "$HEXAGONFS_BASE"
9
10 mkdir "$HEXAGONFS_BASE"/sensors

Adrian / gist:2acc456d2a534180b2b49392dca6f20b

0 likes
0 forks
1 files
Last active 1741109064
1 qcom-sm7150:~# cat /sys/kernel/debug/qcom_socinfo/*
2 0
3 cat: read error: Is a directory
4 cat: read error: Is a directory
5 cat: read error: Is a directory
6
7 cat: read error: Is a directory
8 cat: read error: Is a directory
9 0x00000060
10 SM7150

Adrian / gist:ac4b7a69bc7447e183d5d52912c17d34

0 likes
0 forks
1 files
Last active 1741099016
1 qcom-sm7150:/usr/share/alsa/ucm2/conf.d/sm8250# dmidecode
2 # dmidecode 3.6
3 Getting SMBIOS data from sysfs.
4 SMBIOS 3.7.0 present.
5 Table at 0x1ECA0C020.
6
7 Handle 0x0000, DMI type 0, 26 bytes
8 BIOS Information
9 Vendor: U-Boot
10 Version: 2025.04-rc1-ga10c65258f29

JIaxyga / gist:1c3af8c3f9b142d3877ba2afbd900d4e

0 likes
0 forks
1 files
Last active 1740942766
1 Format: Log Type - Time(microsec) - Message - Optional Info
2 Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
3 S - QC_IMAGE_VERSION_STRING=BOOT.XF.3.1.c3-00001-SM6150LZB-1
4 S - IMAGE_VARIANT_STRING=SDM7150LA
5 S - OEM_IMAGE_VERSION_STRING=s5-0.1-10252351
6 S - Boot Interface: UFS
7 S - Secure Boot: On
8 S - Boot Config @ 0x00786070 = 0x000000c9
9 S - JTAG ID @ 0x00786130 = 0x000e60e1
10 S - JTAG ID2 @ 0x00784130 = 0x101000e6

JIaxyga / gist:d9603a3ab0ad4ab38c45994205a44bac

0 likes
0 forks
1 files
Last active 1740942432
1 Format: Log Type - Time(microsec) - Message - Optional Info
2 Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
3 S - QC_IMAGE_VERSION_STRING=BOOT.XF.3.1.c3-00001-SM6150LZB-1
4 S - IMAGE_VARIANT_STRING=SDM7150LA
5 S - OEM_IMAGE_VERSION_STRING=s5-0.1-10252351
6 S - Boot Interface: UFS
7 S - Secure Boot: On
8 S - Boot Config @ 0x00786070 = 0x000000c9
9 S - JTAG ID @ 0x00786130 = 0x000e60e1
10 S - JTAG ID2 @ 0x00784130 = 0x101000e6

Adrian / gist:ad85563d0d184e11882492c1d318e457

0 likes
0 forks
3 files
Last active 1739510751
1 From 7d24a43841a62bae825d0f0c2742f19fdf0ccb37 Mon Sep 17 00:00:00 2001
2 From: Jens Reidel <[email protected]>
3 Date: Fri, 14 Feb 2025 05:55:19 +0100
4 Subject: [PATCH v2 0/2] Add Goodix Berlin-A series support
5
6 This series adds support for the Goodix Berlin-A series touch ICs
7 (gt9897). This was tested on a Xiaomi 11 Lite 5G NE (xiaomi-lisa),
8 which uses the gt9897 IC connected over SPI. I am not aware of any
9 device that has gt9897 connected over I2C and therefore could not
10 test it, so I didn't add a compatible in the I2C driver.

Adrian / gist:093b4cfb32cd42ed88dadc28902caa18

0 likes
0 forks
1 files
Last active 1739341613
1 Feb 12 07:23:51 xiaomi-davinci iio-sensor-prox[648]: Not a switch [/sys/devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:adc@3100/iio:device0/../capabilities/sw]
2 Feb 12 07:23:51 xiaomi-davinci iio-sensor-prox[648]: Invalid bitmask entry for /sys/devices/platform/gpio-keys/input/input2/event2
3 Feb 12 07:23:51 xiaomi-davinci iio-sensor-prox[648]: [qrtr] socket lookup from 1:0
4 Feb 12 07:23:51 xiaomi-davinci iio-sensor-prox[648]: [qrtr] added server on 1:14 -> service 14, version 1, instance 0
5 Feb 12 07:23:51 xiaomi-davinci iio-sensor-prox[648]: [qrtr] created new node 1
6 Feb 12 07:23:51 xiaomi-davinci iio-sensor-prox[648]: [qrtr] added server on 1:16386 -> service 49, version 1, instance 1
7 Feb 12 07:23:51 xiaomi-davinci iio-sensor-prox[648]: [qrtr] added server on 1:16389 -> service 64, version 1, instance 1
8 Feb 12 07:23:51 xiaomi-davinci iio-sensor-prox[648]: [qrtr] added server on 1:16392 -> service 4096, version 1, instance 0
9 Feb 12 07:23:51 xiaomi-davinci iio-sensor-prox[648]: [qrtr] added server on 5:1 -> service 15, version 1, instance 32
10 Feb 12 07:23:51 xiaomi-davinci iio-sensor-prox[648]: [qrtr] created new node 5
Newer Older

Powered by Opengist ⋅ Load: 162ms⋅

English
⋅ Forgejo