Like 0
Fork 0

Last active 1735916005

Revision 7353c01f226a914e8740b79fd9e8d6503bcc5341

gistfile1.txt Raw
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2025, Danila Tikhonov <[email protected]>
4 */
5/dts-v1/;
6
7#include <dt-bindings/leds/common.h>
8#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
9#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10
11#include "sm8475.dtsi"
12#include "pm8350.dtsi"
13#include "pm8350b.dtsi"
14#include "pm8350c.dtsi"
15#include "pm8450.dtsi"
16#include "pmk8350.dtsi"
17#include "pmr735a.dtsi"
18
19/delete-node/ &video_mem;
20/delete-node/ &adsp_mem;
21/delete-node/ &rmtfs_mem;
22
23/ {
24 model = "Nothing Phone (2)";
25 compatible = "nothing,pong", "qcom,sm8475";
26 chassis-type = "handset";
27
28 aliases {
29 hsuart0 = &uart20;
30 serial0 = &uart7;
31 };
32
33 chosen {
34 #address-cells = <2>;
35 #size-cells = <2>;
36 ranges;
37
38 bootargs = "PMOS_NOSPLASH console=tty0 clk_ignore_unused pd_ignore_unused";
39
40 framebuffer: framebuffer@b8000000 {
41 compatible = "simple-framebuffer";
42 reg = <0x0 0xb8000000 0x0 0x2b00000>;
43 width = <1080>;
44 height = <2412>;
45 stride = <(1080 * 4)>;
46 format = "a8r8g8b8";
47
48 clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
49 };
50 };
51
52 /* goodix,fingerprint */
53
54 gpio-keys {
55 compatible = "gpio-keys";
56
57 pinctrl-0 = <&volume_up_n>;
58 pinctrl-names = "default";
59
60 key-volume-up {
61 label = "Volume Up";
62 linux,code = <KEY_VOLUMEUP>;
63 gpios = <&pm8350_gpios 6 GPIO_ACTIVE_LOW>;
64 debounce-interval = <15>;
65 linux,can-disable;
66 wakeup-source;
67 };
68 };
69
70 reserved-memory {
71 adsp_mem: memory@85700000 {
72 reg = <0x0 0x85700000 0x0 0x2800000>;
73 no-map;
74 };
75
76 ramoops@85200000 {
77 compatible = "ramoops";
78 reg = <0x0 0x85200000 0x0 0x400000>;
79
80 record-size = <0x200000>;
81 pmsg-size = <0x200000>;
82 console-size = <0x200000>;
83 no-map;
84 };
85
86 video_mem: memory@9fd00000 {
87 reg = <0x0 0x9fd00000 0x0 0x700000>;
88 no-map;
89 };
90
91 splash_region@b8000000 {
92 reg = <0x0 0xb8000000 0x0 0x2b00000>;
93 no-map;
94 };
95
96 /*
97 * bootloader_log_region: reg = <0x0 0xa7605000 0x0 0x8000>;
98 * splash_region: reg = <0x0 0xb8000000 0x0 0x2b00000>;
99 */
100
101 rmtfs_mem: memory@fc700000 {
102 compatible = "qcom,rmtfs-mem";
103 reg = <0x0 0xf3300000 0x0 0x280000>;
104 no-map;
105
106 qcom,client-id = <1>;
107 qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
108 };
109 };
110
111 vph_pwr: vph-pwr-regulator {
112 compatible = "regulator-fixed";
113 regulator-name = "vph_pwr";
114 regulator-min-microvolt = <3700000>;
115 regulator-max-microvolt = <3700000>;
116
117 regulator-always-on;
118 regulator-boot-on;
119 };
120};
121
122&apps_rsc {
123 regulators-0 {
124 compatible = "qcom,pm8350-rpmh-regulators";
125 qcom,pmic-id = "b";
126
127 vdd-s1-supply = <&vph_pwr>;
128 vdd-s2-supply = <&vph_pwr>;
129 vdd-s3-supply = <&vph_pwr>;
130 vdd-s4-supply = <&vph_pwr>;
131 vdd-s5-supply = <&vph_pwr>;
132 vdd-s6-supply = <&vph_pwr>;
133 vdd-s7-supply = <&vph_pwr>;
134 vdd-s8-supply = <&vph_pwr>;
135 vdd-s9-supply = <&vph_pwr>;
136 vdd-s10-supply = <&vph_pwr>;
137 vdd-s11-supply = <&vph_pwr>;
138 vdd-s12-supply = <&vph_pwr>;
139
140 vdd-l1-l4-supply = <&pm8350_s11>;
141 vdd-l2-l7-supply = <&vreg_bob>;
142 vdd-l3-l5-supply = <&pm8350_s11>;
143 vdd-l6-l9-l10-supply = <&pm8350_s12>;
144
145 /*
146 * ARC regulators:
147 * s5 - gfx.lvl
148 * l8 - lcx.lvl
149 */
150
151 pm8350_s10: smps10 {
152 regulator-name = "pm8350_s10";
153 regulator-min-microvolt = <1800000>;
154 regulator-max-microvolt = <1800000>;
155 };
156
157 pm8350_s11: smps11 {
158 regulator-name = "pm8350_s11";
159 regulator-min-microvolt = <382000>;
160 regulator-max-microvolt = <1170000>;
161 };
162
163 pm8350_s12: smps12 {
164 regulator-name = "pm8350_s12";
165 regulator-min-microvolt = <1224000>;
166 regulator-max-microvolt = <2040000>;
167 };
168
169 pm8350_l1: ldo1 {
170 regulator-name = "pm8350_l1";
171 regulator-min-microvolt = <830000>;
172 regulator-max-microvolt = <920000>;
173 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
174 };
175
176 pm8350_l2: ldo2 {
177 regulator-name = "pm8350_l2";
178 regulator-min-microvolt = <2700000>;
179 regulator-max-microvolt = <3300000>;
180 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
181 };
182
183 pm8350_l3: ldo3 {
184 regulator-name = "pm8350_l3";
185 regulator-min-microvolt = <870000>;
186 regulator-max-microvolt = <970000>;
187 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
188 };
189
190 pm8350_l5: ldo5 {
191 regulator-name = "pm8350_l5";
192 regulator-min-microvolt = <720000>;
193 regulator-max-microvolt = <958000>;
194 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
195 };
196
197 pm8350_l6: ldo6 {
198 regulator-name = "pm8350_l6";
199 regulator-min-microvolt = <1200000>;
200 regulator-max-microvolt = <1216000>;
201 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
202 };
203
204 pm8350_l7: ldo7 {
205 regulator-name = "pm8350_l7";
206 regulator-min-microvolt = <2400000>;
207 regulator-max-microvolt = <3544000>;
208 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
209 };
210
211 pm8350_l9: ldo9 {
212 regulator-name = "pm8350_l9";
213 regulator-min-microvolt = <1200000>;
214 regulator-max-microvolt = <1304000>;
215 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
216 };
217 };
218
219 regulators-1 {
220 compatible = "qcom,pm8350c-rpmh-regulators";
221 qcom,pmic-id = "c";
222
223 vdd-s1-supply = <&vph_pwr>;
224 vdd-s2-supply = <&vph_pwr>;
225 vdd-s3-supply = <&vph_pwr>;
226 vdd-s4-supply = <&vph_pwr>;
227 vdd-s5-supply = <&vph_pwr>;
228 vdd-s6-supply = <&vph_pwr>;
229 vdd-s7-supply = <&vph_pwr>;
230 vdd-s8-supply = <&vph_pwr>;
231 vdd-s9-supply = <&vph_pwr>;
232 vdd-s10-supply = <&vph_pwr>;
233
234 vdd-l1-l12-supply = <&pm8350c_s1>;
235 vdd-l2-l8-supply = <&pm8350c_s1>;
236 vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
237 vdd-l6-l9-l11-supply = <&vreg_bob>;
238 vdd-l10-supply = <&pm8350_s12>;
239
240 vdd-bob-supply = <&vph_pwr>;
241
242 /*
243 * ARC regulators:
244 * s2 - mxc.lvl
245 * s4 - mss.lvl
246 * s6 - cx.lvl
247 */
248
249 pm8350c_s1: smps1 {
250 regulator-name = "pm8350c_s1";
251 regulator-min-microvolt = <1900000>;
252 regulator-max-microvolt = <2024000>;
253 };
254
255 pm8350c_s10: smps10 {
256 regulator-name = "pm8350c_s10";
257 regulator-min-microvolt = <1052000>;
258 regulator-max-microvolt = <1170000>;
259 };
260
261 vreg_bob: bob {
262 regulator-name = "vreg_bob";
263 regulator-min-microvolt = <3008000>;
264 regulator-max-microvolt = <3960000>;
265 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
266 };
267
268 pm8350c_l2: ldo2 {
269 regulator-name = "pm8350c_l2";
270 regulator-min-microvolt = <1800000>;
271 regulator-max-microvolt = <1980000>;
272 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
273 };
274
275 pm8350c_l3: ldo3 {
276 regulator-name = "pm8350c_l3";
277 regulator-min-microvolt = <2700000>;
278 regulator-max-microvolt = <3544000>;
279 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
280 };
281
282 pm8350c_l4: ldo4 {
283 regulator-name = "pm8350c_l4";
284 regulator-min-microvolt = <1620000>;
285 regulator-max-microvolt = <3300000>;
286 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
287 };
288
289 pm8350c_l5: ldo5 {
290 regulator-name = "pm8350c_l5";
291 regulator-min-microvolt = <1620000>;
292 regulator-max-microvolt = <3300000>;
293 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
294 };
295
296 pm8350c_l6: ldo6 {
297 regulator-name = "pm8350c_l6";
298 regulator-min-microvolt = <1800000>;
299 regulator-max-microvolt = <3544000>;
300 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
301 };
302
303 pm8350c_l7: ldo7 {
304 regulator-name = "pm8350c_l7";
305 regulator-min-microvolt = <3000000>;
306 regulator-max-microvolt = <3544000>;
307 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
308 };
309
310 pm8350c_l8: ldo8 {
311 regulator-name = "pm8350c_l8";
312 regulator-min-microvolt = <1800000>;
313 regulator-max-microvolt = <2000000>;
314 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
315 };
316
317 pm8350c_l9: ldo9 {
318 regulator-name = "pm8350c_l9";
319 regulator-min-microvolt = <2700000>;
320 regulator-max-microvolt = <3544000>;
321 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
322 };
323
324 pm8350c_l10: ldo10 {
325 regulator-name = "pm8350c_l10";
326 regulator-min-microvolt = <1200000>;
327 regulator-max-microvolt = <1304000>;
328 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
329 };
330
331 pm8350c_l12: ldo12 {
332 regulator-name = "pm8350c_l12";
333 regulator-min-microvolt = <1800000>;
334 regulator-max-microvolt = <1980000>;
335 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
336 };
337
338 pm8350c_l13: ldo13 {
339 regulator-name = "pm8350c_l13";
340 regulator-min-microvolt = <2700000>;
341 regulator-max-microvolt = <3544000>;
342 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
343 };
344 };
345
346 regulators-2 {
347 compatible = "qcom,pm8450-rpmh-regulators";
348 qcom,pmic-id = "h";
349
350 vdd-s1-supply = <&vph_pwr>;
351 vdd-s2-supply = <&vph_pwr>;
352 vdd-s3-supply = <&vph_pwr>;
353 vdd-s4-supply = <&vph_pwr>;
354 vdd-s5-supply = <&vph_pwr>;
355 vdd-s6-supply = <&vph_pwr>;
356
357 vdd-l2-supply = <&vreg_bob>;
358 vdd-l3-supply = <&vreg_bob>;
359 vdd-l4-supply = <&vreg_bob>;
360
361 /*
362 * ARC regulators:
363 * S2 - ebi.lvl
364 * S4 - mmcx.lvl
365 * S6 - mx.lvl
366 * L1 - lmx.lvl
367 */
368
369 pm8450_s3: smps3 {
370 regulator-name = "pm8450_s3";
371 regulator-min-microvolt = <470000>;
372 regulator-max-microvolt = <570000>;
373 };
374
375 pm8450_l2: ldo2 {
376 regulator-name = "pm8450_l2";
377 regulator-min-microvolt = <820000>;
378 regulator-max-microvolt = <958000>;
379 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
380 };
381
382 pm8450_l3: ldo3 {
383 regulator-name = "pm8450_l3";
384 regulator-min-microvolt = <866000>;
385 regulator-max-microvolt = <958000>;
386 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
387 };
388 };
389
390 regulators-3 {
391 compatible = "qcom,pmr735a-rpmh-regulators";
392 qcom,pmic-id = "e";
393
394 vdd-s1-supply = <&vph_pwr>;
395 vdd-s2-supply = <&vph_pwr>;
396 vdd-s3-supply = <&vph_pwr>;
397
398 vdd-l1-l2-supply = <&pmr735a_s2>;
399 vdd-l3-supply = <&pmr735a_s1>;
400 vdd-l4-supply = <&pm8350c_s1>;
401 vdd-l5-l6-supply = <&pm8350c_s1>;
402 vdd-l7-bob-supply = <&vreg_bob>;
403
404 pmr735a_s1: smps1 {
405 regulator-name = "pmr735a_s1";
406 regulator-min-microvolt = <1200000>;
407 regulator-max-microvolt = <1296000>;
408 };
409
410 pmr735a_s2: smps2 {
411 regulator-name = "pmr735a_s2";
412 regulator-min-microvolt = <500000>;
413 regulator-max-microvolt = <1040000>;
414 };
415
416 pmr735a_s3: smps3 {
417 regulator-name = "pmr735a_s3";
418 regulator-min-microvolt = <300000>;
419 regulator-max-microvolt = <2352000>;
420 };
421
422 pmr735a_l1: ldo1 {
423 regulator-name = "pmr735a_l1";
424 regulator-min-microvolt = <800000>;
425 regulator-max-microvolt = <880000>;
426 };
427
428 pmr735a_l2: ldo2 {
429 regulator-name = "pmr735a_l2";
430 regulator-min-microvolt = <480000>;
431 regulator-max-microvolt = <1200000>;
432 };
433
434 pmr735a_l3: ldo3 {
435 regulator-name = "pmr735a_l3";
436 regulator-min-microvolt = <1200000>;
437 regulator-max-microvolt = <1200000>;
438 };
439
440 pmr735a_l4: ldo4 {
441 regulator-name = "pmr735a_l4";
442 regulator-min-microvolt = <1776000>;
443 regulator-max-microvolt = <1776000>;
444 };
445
446 pmr735a_l5: ldo5 {
447 regulator-name = "pmr735a_l5";
448 regulator-min-microvolt = <880000>;
449 regulator-max-microvolt = <920000>;
450 };
451
452 pmr735a_l6: ldo6 {
453 regulator-name = "pmr735a_l6";
454 regulator-min-microvolt = <1200000>;
455 regulator-max-microvolt = <1200000>;
456 };
457
458 pmr735a_l7: ldo7 {
459 regulator-name = "pmr735a_l7";
460 regulator-min-microvolt = <2800000>;
461 regulator-max-microvolt = <2800000>;
462 };
463 };
464};
465
466&dispcc {
467 status = "okay";
468};
469
470&gpi_dma0 {
471 status = "okay";
472};
473
474&gpi_dma1 {
475 status = "okay";
476};
477
478&gpi_dma2 {
479 status = "okay";
480};
481
482&gpu {
483 status = "okay";
484
485 zap-shader {
486 firmware-name = "qcom/a730_zap.mbn";
487 };
488};
489
490&i2c5 {
491 clock-frequency = <100000>;
492 status = "okay";
493
494 /* nq@64 rtc6226 */
495
496 fsa4480: typec-mux@42 {
497 compatible = "fcs,fsa4480";
498 reg = <0x42>;
499
500 mode-switch;
501 orientation-switch;
502
503 port {
504 fsa4480_ept: endpoint {
505 //remote-endpoint = <&typec_controller>;
506 };
507 };
508 };
509
510 /* redriver@1c onnn,redriver */
511 /* aw20036_led@3a awinic,aw20036_led */
512
513 nxp_eusb2_repeater: repeater@4f {
514 compatible = "nxp,eusb2-repeater";
515 reg = <0x4f>;
516
517 vdd18-supply = <&pm8350_s10>;
518 vdd3-supply = <&pm8350_l2>;
519
520 reset-gpio = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
521 pinctrl-names = "default";
522 pinctrl-0 = <&eusb2_reset_default>;
523
524 qcom,param-override-seq = <64 6 34 7 100 8>;
525 /*
526 * Rx squelch detection threshold to 110mV (default is 125mV);
527 * Tx Deemphasis to 2dB, Tx Deemphasis bit duration to 0.8UI
528 * (default is 0 for both);
529 * Output Voltage Swing to 550mV (default is 450mV);
530 */
531 #phy-cells = <0>;
532 };
533};
534
535&i2c9 {
536 clock-frequency = <1000000>;
537 status = "okay";
538
539 /* nq@28 qcom,sn-nci */
540};
541
542&i2c13 {
543 clock-frequency = <1000000>;
544 status = "okay";
545
546 /* tfa98xx@34 */
547 /* tfa98xx@35 */
548};
549
550&i2c18 {
551 clock-frequency = <1000000>;
552 status = "okay";
553
554 /* haptic_hv@5a awinic,aw8692x */
555};
556
557&mdss {
558 status = "okay";
559};
560
561&mdss_dsi0 {
562 vdda-supply = <&pm8350_l6>;
563
564 status = "okay";
565
566 panel@0 {
567 compatible = "mdss,nt37705-visionox-amoled-120hz";
568 reg = <0>;
569
570 reset-gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
571 te-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
572
573 vdd-supply = <&pm8350c_l13>;
574 vddio-supply = <&pm8350c_l12>;
575
576 pinctrl-0 = <&disp_reset_n_active>, <&mdp_vsync_active>;
577 pinctrl-1 = <&disp_reset_n_suspend>, <&mdp_vsync_suspend>;
578 pinctrl-names = "default", "sleep";
579
580 port {
581 panel_in: endpoint {
582 remote-endpoint = <&mdss_dsi0_out>;
583 };
584 };
585 };
586};
587
588&mdss_dsi0_out {
589 remote-endpoint = <&panel_in>;
590 data-lanes = <0 1 2 3>;
591};
592
593&mdss_dsi0_phy {
594 vdds-supply = <&pm8350_l5>;
595 status = "okay";
596};
597
598&pon_pwrkey {
599 status = "okay";
600};
601
602&pon_resin {
603 linux,code = <KEY_VOLUMEDOWN>;
604
605 status = "okay";
606};
607
608&pm8350_gpios {
609 volume_up_n: volume-up-n-state {
610 pins = "gpio6";
611 function = PMIC_GPIO_FUNC_NORMAL;
612 bias-pull-up;
613 input-enable;
614 power-source = <1>;
615 };
616};
617
618&pm8350c_flash {
619 status = "okay";
620
621 led-0 {
622 function = LED_FUNCTION_FLASH;
623 color = <LED_COLOR_ID_YELLOW>;
624 led-sources = <1>, <4>;
625 led-max-microamp = <500000>;
626 flash-max-microamp = <1500000>;
627 flash-max-timeout-us = <1280000>;
628 };
629};
630
631&pm8350c_gpios {
632 eusb2_reset_default: eusb2-reset-default-state {
633 pins = "gpio7";
634 function = PMIC_GPIO_FUNC_NORMAL;
635 input-enable;
636 output-enable;
637 bias-disable;
638 power-source = <1>; /* 1.8V */
639 qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
640 };
641};
642
643&pmk8350_rtc {
644 status = "okay";
645};
646
647&qupv3_id_0 {
648 status = "okay";
649};
650
651&qupv3_id_1 {
652 status = "okay";
653};
654
655&qupv3_id_2 {
656 status = "okay";
657};
658
659&remoteproc_adsp {
660 firmware-name = "qcom/sm8475/pong/adsp.mbn";
661 status = "okay";
662};
663
664&remoteproc_cdsp {
665 firmware-name = "qcom/sm8475/pong/cdsp.mbn";
666 status = "okay";
667};
668
669&remoteproc_mpss {
670 firmware-name = "qcom/sm8475/pong/modem.mbn";
671 status = "okay";
672};
673
674&remoteproc_slpi {
675 firmware-name = "qcom/sm8475/pong/slpi.mbn";
676 status = "okay";
677};
678
679&qup_spi4_data_clk {
680 drive-strength = <6>;
681 bias-disable;
682};
683
684&spi4 {
685 status = "okay";
686
687 touchscreen@0 {
688 compatible = "goodix,gt9916";
689 reg = <0>;
690
691 interrupt-parent = <&tlmm>;
692 interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
693
694 reset-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
695
696 avdd-supply = <&pm8350c_l3>;
697 vddio-supply = <&pm8350c_l12>;
698
699 spi-max-frequency = <20000000>;
700
701 touchscreen-size-x = <1080>;
702 touchscreen-size-y = <2412>;
703
704 pinctrl-names = "default";
705 pinctrl-0 = <&ts_irq>, <&ts_reset>;
706 };
707};
708
709&tlmm {
710 /* Reserved I/Os for FP */
711 gpio-reserved-ranges = <28 4>;
712
713 disp_reset_n_active: disp0-reset-n-active-state {
714 pins = "gpio0";
715 function = "gpio";
716 drive-strength = <8>;
717 bias-disable;
718 };
719
720 disp_reset_n_suspend: disp0-reset-n-suspend-state {
721 pins = "gpio0";
722 function = "gpio";
723 drive-strength = <2>;
724 bias-pull-down;
725 };
726
727 ts_irq: ts-irq-state {
728 pins = "gpio21";
729 function = "gpio";
730 drive-strength = <8>;
731 bias-pull-up;
732 };
733
734 ts_reset: ts-reset-state {
735 pins = "gpio20";
736 function = "gpio";
737 drive-strength = <8>;
738 bias-pull-up;
739 };
740
741 glyph_irq: glyph-irq-state {
742 pins = "gpio60";
743 function = "gpio";
744 drive-strength = <8>;
745 bias-pull-up;
746 };
747
748 glyph_reset: glyph-reset-state {
749 pins = "gpio44";
750 function = "gpio";
751 drive-strength = <8>;
752 bias-disable;
753 };
754
755 mdp_vsync_active: mdp-vsync-active-state {
756 pins = "gpio86", "gpio87";
757 function = "mdp_vsync";
758 drive-strength = <2>;
759 bias-pull-down;
760 };
761
762 mdp_vsync_suspend: mdp-vsync-suspend-state {
763 pins = "gpio86", "gpio87";
764 function = "mdp_vsync";
765 drive-strength = <2>;
766 bias-pull-down;
767 };
768};
769
770&uart7 {
771 status = "okay";
772};
773
774&uart20 {
775 status = "okay";
776
777 /* Bluetooth */
778};
779
780&ufs_mem_hc {
781 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
782
783 vcc-supply = <&pm8350_l7>;
784 vcc-max-microamp = <1100000>;
785 vccq-supply = <&pm8350_l9>;
786 vccq-max-microamp = <1200000>;
787
788 status = "okay";
789};
790
791&ufs_mem_phy {
792 vdda-phy-supply = <&pm8350_l5>;
793 vdda-pll-supply = <&pm8350c_l10>;
794
795 status = "okay";
796};
797
798&usb_1 {
799 /* USB 2.0 only */
800 qcom,select-utmi-as-pipe-clk;
801 status = "okay";
802};
803
804&usb_1_dwc3 {
805 dr_mode = "peripheral";
806 maximum-speed = "high-speed";
807 /* Remove USB3 phy */
808 phys = <&usb_1_hsphy>;
809 phy-names = "usb2-phy";
810};
811
812&usb_1_hsphy {
813 vdd-supply = <&pm8350_l5>;
814 vdda12-supply = <&pm8350c_l10>;
815
816 phys = <&nxp_eusb2_repeater>;
817
818 status = "okay";
819};
820

Powered by Opengist ⋅ Load: 59ms⋅

English
⋅ Forgejo